Menu

Auto Tag: third generation sequencing

April 21, 2020

Generating amplicon reads for microbial community assessment with next-generation sequencing.

Marker gene amplicon sequencing is often preferred over whole genome sequencing for microbial community characterization, due to its lower cost while still enabling assessment of uncultivable organisms. This technique involves many experimental steps, each of which can be a source of errors and bias. We present an up-to-date overview of the whole experimental pipeline, from sampling to sequencing reads, and give information allowing for informed choices at each step of both planning and execution of a microbial community assessment study. When applicable, we also suggest ways of avoiding inherent pitfalls in amplicon sequencing. © 2019 The Society for Applied Microbiology.

Read more
April 21, 2020

Rational development of transformation in Clostridium thermocellum ATCC 27405 via complete methylome analysis and evasion of native restriction-modification systems.

A major barrier to both metabolic engineering and fundamental biological studies is the lack of genetic tools in most microorganisms. One example is Clostridium thermocellum ATCC 27405T, where genetic tools are not available to help validate decades of hypotheses. A significant barrier to DNA transformation is restriction-modification systems, which defend against foreign DNA methylated differently than the host. To determine the active restriction-modification systems in this strain, we performed complete methylome analysis via single-molecule, real-time sequencing to detect 6-methyladenine and 4-methylcytosine and the rarely used whole-genome bisulfite sequencing to detect 5-methylcytosine. Multiple active systems were identified, and corresponding DNA methyltransferases were expressed from the Escherichia coli chromosome to mimic the C. thermocellum methylome. Plasmid methylation was experimentally validated and successfully electroporated into C. thermocellum ATCC 27405. This combined approach enabled genetic modification of the C. thermocellum-type strain and acts as a blueprint for transformation of other non-model microorganisms.

Read more
April 21, 2020

Comparative genomics reveals unique wood-decay strategies and fruiting body development in the Schizophyllaceae.

Agaricomycetes are fruiting body-forming fungi that produce some of the most efficient enzyme systems to degrade wood. Despite decades-long interest in their biology, the evolution and functional diversity of both wood-decay and fruiting body formation are incompletely known. We performed comparative genomic and transcriptomic analyses of wood-decay and fruiting body development in Auriculariopsis ampla and Schizophyllum commune (Schizophyllaceae), species with secondarily simplified morphologies, an enigmatic wood-decay strategy and weak pathogenicity to woody plants. The plant cell wall-degrading enzyme repertoires of Schizophyllaceae are transitional between those of white rot species and less efficient wood-degraders such as brown rot or mycorrhizal fungi. Rich repertoires of suberinase and tannase genes were found in both species, with tannases restricted to Agaricomycetes that preferentially colonize bark-covered wood, suggesting potential complementation of their weaker wood-decaying abilities and adaptations to wood colonization through the bark. Fruiting body transcriptomes revealed a high rate of divergence in developmental gene expression, but also several genes with conserved expression patterns, including novel transcription factors and small-secreted proteins, some of the latter which might represent fruiting body effectors. Taken together, our analyses highlighted novel aspects of wood-decay and fruiting body development in an important family of mushroom-forming fungi. © 2019 The Authors. New Phytologist © 2019 New Phytologist Trust.

Read more
April 21, 2020

Chromosome-level hybrid de novo genome assemblies as an attainable option for non-model organisms

The emergence of third generation sequencing (3GS; long-reads) is making closer the goal of chromosome-size fragments in de novo genome assemblies. This allows the exploration of new and broader questions on genome evolution for a number of non-model organisms. However, long-read technologies result in higher sequencing error rates and therefore impose an elevated cost of sufficient coverage to achieve high enough quality. In this context, hybrid assemblies, combining short-reads and long-reads provide an alternative efficient and cost-effective approach to generate de novo, chromosome-level genome assemblies. The array of available software programs for hybrid genome assembly, sequence correction and manipulation is constantly being expanded and improved. This makes it difficult for non-experts to find efficient, fast and tractable computational solutions for genome assembly, especially in the case of non-model organisms lacking a reference genome or one from a closely related species. In this study, we review and test the most recent pipelines for hybrid assemblies, comparing the model organism Drosophila melanogaster to a non-model cactophilic Drosophila, D. mojavensis. We show that it is possible to achieve excellent contiguity on this non-model organism using the DBG2OLC pipeline.

Read more
April 21, 2020

Insights into the bacterial species and communities of a full-scale anaerobic/anoxic/oxic wastewater treatment plant by using third-generation sequencing.

For the first time, full-length 16S rRNA sequencing method was applied to disclose the bacterial species and communities of a full-scale wastewater treatment plant using an anaerobic/anoxic/oxic (A/A/O) process in Wuhan, China. The compositions of the bacteria at phylum and class levels in the activated sludge were similar to which revealed by Illumina Miseq sequencing. At genus and species levels, third-generation sequencing showed great merits and accuracy. Typical functional taxa classified to ammonia-oxidizing bacteria (AOB), nitrite-oxidizing bacteria (NOB), denitrifying bacteria (DB), anaerobic ammonium oxidation bacteria (ANAMMOXB) and polyphosphate-accumulating organisms (PAOs) were presented, which were Nitrosomonas (1.11%), Nitrospira (3.56%), Pseudomonas (3.88%), Planctomycetes (13.80%), Comamonadaceae (1.83%), respectively. Pseudomonas (3.88%) and Nitrospira (3.56%) were the most predominating two genera, mainly containing Pseudomonas extremaustralis (1.69%), Nitrospira defluvii (3.13%), respectively. Bacteria regarding to nitrogen and phosphorus removal at species level were put forward. The predicted functions proved that the A/A/O process was efficient regarding nitrogen and organics removal. Copyright © 2019 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.

Read more
April 21, 2020

Variant Phasing and Haplotypic Expression from Single-molecule Long-read Sequencing in Maize

Haplotype phasing of genetic variants is important for interpretation of the maize genome, population genetic analysis, and functional genomic analysis of allelic activity. Accordingly, accurate methods for phasing full-length isoforms are essential for functional genomics study. In this study, we performed an isoform-level phasing study in maize, using two inbred lines and their reciprocal crosses, based on single-molecule full-length cDNA sequencing. To phase and analyze full-length transcripts between hybrids and parents, we developed a tool called IsoPhase. Using this tool, we validated the majority of SNPs called against matching short read data and identified cases of allele-specific, gene-level, and isoform-level expression. Our results revealed that maize parental and hybrid lines exhibit different splicing activities. After phasing 6,847 genes in two reciprocal hybrids using embryo, endosperm and root tissues, we annotated the SNPs and identified large-effect genes. In addition, based on single-molecule sequencing, we identified parent-of-origin isoforms in maize hybrids, different novel isoforms between maize parent and hybrid lines, and imprinted genes from different tissues. Finally, we characterized variation in cis- and trans-regulatory effects. Our study provides measures of haplotypic expression that could increase power and accuracy in studies of allelic expression.

Read more
April 21, 2020

Decoding and analysis of organelle genomes of Indian tea (Camellia assamica) for phylogenetic confirmation.

The NCBI database has >15 chloroplast (cp) genome sequences available for different Camellia species but none for C. assamica. There is no report of any mitochondrial (mt) genome in the Camellia genus or Theaceae family. With the strong believes that these organelle genomes can play a great tool for taxonomic and phylogenetic analysis, we successfully assembled and analyzed cp and mt genome of C. assamica. We assembled the complete mt genome of C. assamica in a single circular contig of 707,441?bp length comprising of a total of 66 annotated genes, including 35 protein-coding genes, 29 tRNAs and two rRNAs. The first ever cp genome of C. assamica resulted in a circular contig of 157,353?bp length with a typical quadripartite structure. Phylogenetic analysis based on these organelle genomes showed that C. assamica was closely related to C. sinensis and C. leptophylla. It also supports Caryophyllales as Superasterids. Copyright © 2019. Published by Elsevier Inc.

Read more
April 21, 2020

Complete genome of a marine bacterium Vibrio chagasii ECSMB14107 with the ability to infect mussels

Vibrio strains are pervasive in the aquatic environment and may form pathogenic and symbiotic relationships with the host. Vibrio chagasii ECSMB14107 was isolated from natural biofilms and is used as a model to elucidate the role of Vibrio in hard-shelled mussel (Mytilus coruscus) settlement, health and disease. The genome of the Vibrio strain ECSMB14107, comprised of two circular chromosomes that together encompass 5,549,357?bp with a mean GC content of 44.39% was determined. Knowledge about the genome of V. chagasii ECSMB14107 will provide insight into its contribution to mussel development and health.

Read more
April 21, 2020

Integrating multiple genomic technologies to investigate an outbreak of carbapenemase-producing Enterobacter hormaechei

Carbapenem-resistant Enterobacteriaceae (CRE) represent one of the most urgent threats to human health posed by antibiotic resistant bacteria. Enterobacter hormaechei and other members of the Enterobacter cloacae complex are the most commonly encountered Enterobacter spp. within clinical settings, responsible for numerous outbreaks and ultimately poorer patient outcomes. Here we applied three complementary whole genome sequencing (WGS) technologies to characterise a hospital cluster of blaIMP-4 carbapenemase-producing E. hormaechei.In response to a suspected CRE outbreak in 2015 within an Intensive Care Unit (ICU)/Burns Unit in a Brisbane tertiary referral hospital we used Illumina sequencing to determine that all outbreak isolates were sequence type (ST)90 and near-identical at the core genome level. Comparison to publicly available data unequivocally linked all 10 isolates to a 2013 isolate from the same ward, confirming the hospital environment as the most likely original source of infection in the 2015 cases. No clonal relationship was found to IMP-4-producing isolates identified from other local hospitals. However, using Pacific Biosciences long-read sequencing we were able to resolve the complete context of the blaIMP-4 gene, which was found to be on a large IncHI2 plasmid carried by all IMP-4-producing isolates. Continued surveillance of the hospital environment was carried out using Oxford Nanopore long-read sequencing, which was able to rapidly resolve the true relationship of subsequent isolates to the initial outbreak. Shotgun metagenomic sequencing of environmental samples also found evidence of ST90 E. hormaechei and the IncHI2 plasmid within the hospital plumbing.Overall, our strategic application of three WGS technologies provided an in-depth analysis of the outbreak, including the transmission dynamics of a carbapenemase-producing E. hormaechei cluster, identification of possible hospital reservoirs and the full context of blaIMP-4 on a multidrug resistant IncHI2 plasmid that appears to be widely distributed in Australia.

Read more
April 21, 2020

Genome analysis and Hi-C assisted assembly of Elaeagnus angustifolia L., a deciduous tree belonging to Elaeagnaceae

Elaeagnus angustifolia L. is a deciduous tree of the Elaeagnaceae family. It is widely used in the study of abiotic stress tolerance in plants and for the improvement of desertification-affected land due to its characteristics of drought resistance, salt tolerance, cold resistance, wind resistance, and other environmental adaptation. Here, we report the complete genome sequencing using the Pacific Biosciences (PacBio) platform and Hi-C assisted assembly of E. angustifolia. A total of 44.27 Gb raw PacBio sequel reads were obtained after filtering out low-quality data, with an average length of 8.64 Kb. Assembly using Canu gave an assembly length of 781.09 Mb, with a contig N50 of 486.92 Kb. A total of 39.56 Gb of clean reads was obtained, with a sequencing coverage of 75×, and Q30 ratio > 95.46%. The 510.71 Mb genomic sequence was mapped to the chromosome, accounting for 96.94% of the total length of the sequence, and the corresponding number of sequences was 269, accounting for 45.83% of the total number of sequences. The genome sequence study of E. angustifolia can be a valuable source for the comparative genome analysis of the Elaeagnaceae family members, and can help to understand the evolutionary response mechanisms of the Elaeagnaceae to drought, salt, cold and wind resistance, and thereby provide effective theoretical support for the improvement of desertification-affected land.

Read more
April 21, 2020

Insect genomes: progress and challenges.

In the wake of constant improvements in sequencing technologies, numerous insect genomes have been sequenced. Currently, 1219 insect genome-sequencing projects have been registered with the National Center for Biotechnology Information, including 401 that have genome assemblies and 155 with an official gene set of annotated protein-coding genes. Comparative genomics analysis showed that the expansion or contraction of gene families was associated with well-studied physiological traits such as immune system, metabolic detoxification, parasitism and polyphagy in insects. Here, we summarize the progress of insect genome sequencing, with an emphasis on how this impacts research on pest control. We begin with a brief introduction to the basic concepts of genome assembly, annotation and metrics for evaluating the quality of draft assemblies. We then provide an overview of genome information for numerous insect species, highlighting examples from prominent model organisms, agricultural pests and disease vectors. We also introduce the major insect genome databases. The increasing availability of insect genomic resources is beneficial for developing alternative pest control methods. However, many opportunities remain for developing data-mining tools that make maximal use of the available insect genome resources. Although rapid progress has been achieved, many challenges remain in the field of insect genomics. © 2019 The Royal Entomological Society.

Read more
April 21, 2020

Complete genome of Pseudomonas sp. DMSP-1 isolated from the Arctic seawater of Kongsfjorden, Svalbard

The genus Pseudomonas is highly metabolically diverse and has colonized a wide range of ecological niches. The strain Pseudomonas sp. DMSP-1 was isolated from Arctic seawater (Kongsfjorden, Svalbard) using dimethylsulfoniopropionate (DMSP) as the sole carbon source. To better understand its role in the Arctic coastal ecosystem, the genome of Pseudomonas sp. strain DMSP-1 was completely sequenced. The genome contained a circular chromosome of 6,282,445?bp with an average GC content of 60.01?mol%. A total of 5510 protein coding genes, 70 tRNA genes and 19 rRNA genes were obtained. However, no genes encoding known enzymes associated with DMSP catabolism were identified in the genome, suggesting that novel DMSP degradation genes might exist in Pseudomonas sp. strain DMSP-1.

Read more
April 21, 2020

Towards PacBio-based pan-eukaryote metabarcoding using full-length ITS sequences.

Development of high-throughput sequencing techniques have greatly benefited our understanding about microbial ecology; yet the methods producing short reads suffer from species-level resolution and uncertainty of identification. Here we optimize PacBio-based metabarcoding protocols covering the Internal Transcribed Spacer (ITS region) and partial Small Subunit (SSU) of the rRNA gene for species-level identification of all eukaryotes, with a specific focus on Fungi (including Glomeromycota) and Stramenopila (particularly Oomycota). Based on tests on composite soil samples and mock communities, we propose best suitable degenerate primers, ITS9munngs + ITS4ngsUni for eukaryotes and selected groups therein and discuss pros and cons of long read-based identification of eukaryotes. This article is protected by copyright. All rights reserved.

Read more
April 21, 2020

Extended haplotype phasing of de novo genome assemblies with FALCON-Phase

Haplotype-resolved genome assemblies are important for understanding how combinations of variants impact phenotypes. These assemblies can be created in various ways, such as use of tissues that contain single-haplotype (haploid) genomes, or by co-sequencing of parental genomes, but these approaches can be impractical in many situations. We present FALCON-Phase, which integrates long-read sequencing data and ultra-long-range Hi-C chromatin interaction data of a diploid individual to create high-quality, phased diploid genome assemblies. The method was evaluated by application to three datasets, including human, cattle, and zebra finch, for which high-quality, fully haplotype resolved assemblies were available for benchmarking. Phasing algorithm accuracy was affected by heterozygosity of the individual sequenced, with higher accuracy for cattle and zebra finch (>97%) compared to human (82%). In addition, scaffolding with the same Hi-C chromatin contact data resulted in phased chromosome-scale scaffolds.

Read more
April 21, 2020

A comprehensive evaluation of long read error correction methods

Motivation: Third-generation sequencing technologies can sequence long reads, which is advancing the frontiers of genomics research. However, their high error rates prohibit accurate and efficient downstream analysis. This difficulty has motivated the development of many long read error correction tools, which tackle this problem through sampling redundancy and/or leveraging accurate short reads of the same biological samples. Existing studies to asses these tools use simulated data sets, and are not sufficiently comprehensive in the range of software covered or diversity of evaluation measures used. Results: In this paper, we present a categorization and review of long read error correction methods, and provide a comprehensive evaluation of the corresponding long read error correction tools. Leveraging recent real sequencing data, we establish benchmark data sets and set up evaluation criteria for a comparative assessment which includes quality of error correction as well as run-time and memory usage. We study how trimming and long read sequencing depth affect error correction in terms of length distribution and genome coverage post-correction, and the impact of error correction performance on an important application of long reads, genome assembly. We provide guidelines for practitioners for choosing among the available error correction tools and identify directions for future research.

Read more

Subscribe for blog updates:

Talk with an expert

If you have a question, need to check the status of an order, or are interested in purchasing an instrument, we're here to help.