Menu

Auto Tag: Disease

June 1, 2021  |  

High-accuracy, single-base resolution of near-full-length HIV genomes.

Background: The HIV-1 proviral reservoir is incredibly stable, even while undergoing antiretroviral therapy, and is seen as the major barrier to HIV-1 eradication. Identifying and comprehensively characterizing this reservoir will be critical to achieving an HIV cure. Historically, this has been a tedious and labor intensive process, requiring high-replicate single-genome amplification reactions, or overlapping amplicons that are then reconstructed into full-length genomes by algorithmic imputation. Here, we present a deep sequencing and analysis method able to determine the exact identity and relative abundances of near-full-length HIV genomes from samples containing mixtures of genomes without shearing or complex bioinformatic reconstruction. Methods: We generated clonal near-full-length (~9 kb) amplicons derived from single genome amplification (SGA) of primary proviral isolates or PCR of well-documented control strains. These clonal products were mixed at various abundances and sequenced as near-full-length (~9 kb) amplicons without shearing. Each mixture yielded many near-full-length HIV-1 reads. Mathematical analysis techniques resolved the complex mixture of reads into estimates of distinct near-full-length viral genomes with their relative abundances. Results: Single Molecule, Real-Time (SMRT) Sequencing data contained near-full-length (~9 kb) continuous reads for each sample including some runs with greater than 10,000 near-full-length-genome reads in a three-hour sequencing run. Our methods correctly recapitulated exactly the originating genomes at a single-base resolution and their relative abundances in both mixtures of clonal controls and SGAs, and these results were validated using independent sequencing methods. Correct resolution was achieved even when genomes differed only by a single base. Minor abundances of 5% were reliably detected. Conclusions: SMRT Sequencing yields long-read sequencing results from individual DNA molecules, a rapid time-to-result. The single-molecule, full-length nature of this sequencing method allows us to estimate variant subspecies and relative abundances with single-nucleotide resolution. This method allows for reference-agnostic and cost-effective full-genome sequencing of HIV-1, which could both further our understanding of latent infection and develop novel and improved tools for quantifying HIV provirus, which will be critical to cure HIV.

Read more
June 1, 2021  |  

Assembly of complete KIR haplotypes from a diploid individual by the direct sequencing of full-length fosmids.

We show that linearizing and directly sequencing full-length fosmids simplifies the assembly problem such that it is possible to unambiguously assemble individual haplotypes for the highly repetitive 100-200 kb killer Ig-like receptor (KIR) gene loci of chromosome 19. A tiling of targeted fosmids can be used to clone extended lengths of genomic DNA, 100s of kb in length, but repeat complexity in regions of particular interest, such as the KIR locus, means that sequence assembly of pooled samples into complete haplotypes is difficult and in many cases impossible. The current maximum read length generated by SMRT Sequencing exceeds the length of a 40 kb fosmid; it is therefore possible to span an entire fosmid in one sequencing read. Shearing, sequencing and assembling fosmids in a shotgun approach is prone to errors when the underlying sequence is highly repetitive. We show that it is possible to directly sequence linearized fosmids and generate a high-quality consensus by simple alignment, removing the need for an error-prone assembly step. The high-quality sequence of complete fosmids can then be tiled into full haplotypes. We demonstrate the method on DNA samples from a number of individuals and fully recover the sequence of both haplotypes from a pool of KIR fosmids. The ability to haplotype and sequence complex immunogenetic regions will bring exciting opportunities to explore the evolution of disease associations of the immune sub-genome. This simple and robust approach can be scaled-up allowing a complex genomic region to be sequenced at a population level. We expect such sequencing to be valuable in disease association research.

Read more
June 1, 2021  |  

Highly contiguous de novo human genome assembly and long-range haplotype phasing using SMRT Sequencing

The long reads, random error, and unbiased sampling of SMRT Sequencing enables high quality, de novo assembly of the human genome. PacBio long reads are capable of resolving genomic variations at all size scales, including SNPs, insertions, deletions, inversions, translocations, and repeat expansions, all of which are important in understanding the genetic basis for human disease and difficult to access via other technologies. In demonstration of this, we report a new high-quality, diploid aware de novo assembly of Craig Venter’s well-studied genome.

Read more
June 1, 2021  |  

Profiling metagenomic communities using circular consensus and Single Molecule, Real-Time Sequencing.

There are many sequencing-based approaches to understanding complex metagenomic communities spanning targeted amplification to whole-sample shotgun sequencing. While targeted approaches provide valuable data at low sequencing depth, they are limited by primer design and PCR amplification. Whole-sample shotgun experiments generally use short-read, second-generation sequencing, which results in data processing difficulties. For example, reads less than 1 kb in length will likely not cover a complete gene or region of interest, and will require assembly. This not only introduces the possibility of incorrectly combining sequence from different community members, it requires a high depth of coverage. As such, rare community members may not be represented in the resulting assembly. Circular-consensus, single molecule, real-time (SMRT) Sequencing reads in the 1-2 kb range, with >99% accuracy can be efficiently generated for low amounts of input DNA. 10 ng of input DNA sequenced in 4 SMRT Cells would generate >100,000 such reads. While throughput is low compared to second-generation sequencing, the reads are a true random sampling of the underlying community, since SMRT Sequencing has been shown to have no sequence-context bias. Long read lengths mean that that it would be reasonable to expect a high number of the reads to include gene fragments useful for analysis.

Read more
June 1, 2021  |  

Access full spectrum of polymorphisms in HLA class I & II genes, without imputation for disease association and evolutionary research.

MHC class I and II genes are critically monitored by high-resolution sequencing for organ transplant decisions due to their role in GVHD. Their direct or linkage-based causal association, have increased their prominence as targets for drug sensitivity, autoimmune, cancer and infectious disease research. Monitoring HLA genes can however be tricky due to their highly polymorphic nature. Allele-level resolution is thus strongly preferred. However, most studies were historically focused on peptide binding domains of the HLA genes, due to technological challenges. As a result knowledge about the functional role of polymorphisms outside of exons 2 and 3 of HLA genes was rather limited. There are also relatively few full-length gene references currently available in the IMGT HLA database. This made it difficult to quickly adopt high-throughput reference-reliant methods for allele-level HLA sequencing. Increasing awareness regarding role of regulatory region polymorphisms of HLA genes in disease association1, nonetheless have brought about a revolution in full-length HLA gene sequencing. Researchers are now exploring ways to obtain complete information for HLA genes and integrate it with the current HLA database so it can be interpreted used by clinical researchers. We have explored advantages of SMRT Sequencing to obtain fully phased, allele-specific sequences of HLA class I and II genes for 96 samples using completely De novo consensus generation approach for imputation-free 4-field typing. With long read lengths (average >10 kb) and consensus accuracy exceeding 99.999% (Q50), a comprehensive snapshot of variants in exons, introns and UTRs could be obtained for spectrum of polymorphisms in phase across SNP-poor regions. Such information can provide invaluable insights in future causality association and population diversity research.

Read more
June 1, 2021  |  

Full-length cDNA sequencing of alternatively spliced isoforms provides insight into human cancer

The majority of human genes are alternatively spliced, making it possible for most genes to generate multiple proteins. The process of alternative splicing is highly regulated in a developmental-stage and tissue-specific manner. Perturbations in the regulation of these events can lead to disease in humans (1). Alternative splicing has been shown to play a role in human cancer, muscular dystrophy, Alzheimer’s, and many other diseases. Understanding these diseases requires knowing the full complement of mRNA isoforms. Microarrays and high-throughput cDNA sequencing have become highly successful tools for studying transcriptomes, however these technologies only provide small fragments of transcripts and building complete transcript isoforms has been very challenging (2). We have developed a technique, called Iso-Seq sequencing, that is capable of sequencing full-length, single-molecule cDNA sequences. The method employs SMRT Sequencing from PacBio, which can sequence individual molecules with read lengths that average more than 10 kb and can reach as long as 40 kb. As most transcripts are from 1 – 10 kb, we can sequence through entire RNA molecules, requiring no fragmentation or post-sequencing assembly. Jointly with the sequencing method, we developed a computational pipeline that polishes these full-length transcript sequences into high-quality, non-redundant transcript consensus sequences. Iso-Seq sequencing enables unambiguous identification of alternative splicing events, alternative transcriptional start and polyA sites, and transcripts from gene fusion events. Knowledge of the complete set of isoforms from a sample of interest is key for accurate quantification of isoform abundance when using any technology for transcriptome studies (3). Here we characterize the full-length transcriptome of paired tumor/normal samples from breast cancer using deep Iso-Seq sequencing. We highlight numerous discoveries of novel alternatively spliced isoforms, gene-fusion events, and previously unannotated genes that will improve our understanding of human cancer. (1) Faustino NA and Cooper TA. Genes and Development. 2003. 17: 419-437(2) Steijger T, et al. Nat Methods. 2013 Dec;10(12):1177-84.(3) Au KF, et al. Proc Natl Acad Sci U S A. 2013 Dec 10;110(50):E4821-30.

Read more
June 1, 2021  |  

Epigenome characterization of human genomes using the PacBio platform

In addition to the genome and transcriptome, epigenetic information is essential to understand biological processes and their regulation, and their misregulation underlying disease. Traditionally, epigenetic DNA modifications are detected using upfront sample preparation steps such as bisulfite conversion, followed by sequencing. Bisulfite sequencing has provided a wealth of knowledge about human epigenetics, however it does not access the entire genome due to limitations in read length and GC- bias of the sequencing technologies used. In contrast, Single Molecule, Real-Time (SMRT) DNA Sequencing is unique in that it can detect DNA base modifications as part of the sequencing process. It can thereby leverage the long read lengths and lack of GC bias for more comprehensive views of the human epigenome. I will highlight several examples of this capability towards the generation of new biological insights, including the resolution of methylation states in repetitive and GC-rich regions of the genome, and large-scale changes in the methylation status across a cancer genome as a function of drug sensitivity.

Read more
June 1, 2021  |  

HLA variant identification techniques

The Human Leukocyte Antigen (HLA) genes located on chromosome 6 are responsible for regulating immune function via antigen presentation and are one of the determining factors for stem cell and organ transplantation compatibility. Additionally various alleles within this region have been implicated in autoimmune disorders, cancer, vaccine response and both non-infectious and infectious disease risk. The HLA region is highly variable; containing repetitive regions; and co-dominantly expressed genes. This complicates short read mapping and means that assessing the effect of variation within a gene requires full phase information to resolve haplotypes.One solution to the problem of HLA identification is the use of statistical inference to suggest the most likely diploid alleles given the genotypes observed. The assumption of this approach is the availability of an extensive reference panel. Whilst there exists good population genetics data for imputing European populations, there remains a paucity of information about variation in African populations. Filling this gap is one of the aims of the Genome Diversity in Africa Project and as a first step we are performing a pilot study to identify the optimal method for determining HLA type information for large numbers of samples from African populations.To that end we have obtained samples from 125 consented African participants selected from 5 populations across Africa (Morrocan, Ashanti, Igbo, Kalenjin, and Zulu). The methods included in our pilot study are Sanger sequencing (ABI), NGS on HiSeqX Ten platform (Illumina); long-range PCR combined with single molecule real-time (SMRT) sequencing (PacBio); and for a subset of samples library preparation on GemCode Platform (10x Genomics), which delivers valuable long range contextual information, combined with Illumina NGS sequencing.Results from capillary sequencing suggests the presence of a minimum of two novel alleles. Long Range PCR have been performed initially on a subset of samples using both primers sourced from GenDX and designed as described in Shiina et al (2012). Initial results from both primer sets were promising on Promega DNA test samples but only the GenDX primers proved effective on the African samples, producing consistently PCR products of the expected size in the Igbo, Ashanti, Morrocan and Zulu samples. We will present early results from our evaluation of the different sequencing technologies

Read more
June 1, 2021  |  

Building a platinum human genome assembly from single haplotype human genomes generated from long molecule sequencing

The human reference sequence has provided a foundation for studies of genome structure, human variation, evolutionary biology, and disease. At the time the reference was originally completed there were some loci recalcitrant to closure; however, the degree to which structural variation and diversity affected our ability to produce a representative genome sequence at these loci was still unknown. Many of these regions in the genome are associated with large, repetitive sequences and exhibit complex allelic diversity such producing a single, haploid representation is not possible. To overcome this challenge, we have sequenced DNA from two hydatidiform moles (CHM1 and CHM13), which are essentially haploid. CHM13 was sequenced with the latest PacBio technology (P6-C5) to 52X genome coverage and assembled using Daligner and Falcon v0.2 (GCA_000983455.1, CHM13_1.1). Compared to the first mole (CHM1) PacBio assembly (GCA_001007805.1, 54X) contig N50 of 4.5Mb, the contig N50 of CHM13_1.1 is almost 13Mb, and there is a 13-fold reduction in the number of contigs. This demonstrates the improved contiguity of sequence generated with the new chemistry. We annotated 50,188 RefSeq transcripts of which only 0.63% were split transcripts, and the repetitive and segmental duplication content was within the expected range. These data all indicate an extremely high quality assembly. Additionally, we sequenced CHM13 DNA using Illumina SBS technology to 60X coverage, aligned these reads to the GRCh37, GRCh38, and CHM13_1.1 assemblies and performed variant calling using the SpeedSeq pipeline. The number of single nucleotide variants (SNV) and indels was comparable between GRCh37 and GRCh38. Regions that showed increased SNV density in GRCh38 compared to GRCh37 could be attributed to the addition of centromeric alpha satellite sequence to the reference assembly. Alternatively, regions of decreased SNV density in GRCh38 were concentrated in regions that were improved from BAC based sequencing of CHM1 such as 1p12 and 1q21 containing the SRGAP2 gene family. The alignment of PacBio reads to GRCh37 and GRCh38 assemblies allowed us to resolve complex loci such as the MHC region where the best alignment was to the DBB (A2-B57-DR7) haplotype. Finally, we will discuss how combining the two high quality mole assemblies can be used for benchmarking and novel bioinformatics tool development.

Read more
June 1, 2021  |  

Highly accurate read mapping of third generation sequencing reads for improved structural variation analysis

Characterizing genomic structural variations (SV) is vital for understanding how genomes evolve. Furthermore, SVs are known for playing a role in a wide range of diseases including cancer, autism, and schizophrenia. Nevertheless, due to their complexity they remain harder to detect and less understood than single nucleotide variations. Recently, third-generation sequencing has proven to be an invaluable tool for detecting SVs. The markedly higher read length not only allows single reads to span a SV, it also enables reliable mapping to repetitive regions of the genome. These regions often contain SVs and are inaccessible to short-read mapping. However, current sequencing technologies like PacBio show a raw read error rate of 10% or more consisting mostly of insertions and deletions. Especially in repetitive regions the high error rate causes current mapping methods to fail finding exact borders for SVs, to split up large deletions and insertions into several small ones, or in some cases, like inversions, to fail reporting them at all. Furthermore, for complex SVs it is not possible to find one end-to-end alignment for a given read. The decision of when to split a read into two or more separate alignments without knowledge of the underlying SV poses an even bigger challenge to current read mappers. Here we present NextGenMap-LR for long single molecule PacBio reads which addresses these issues. NextGenMap-LR uses a fast k-mer search to quickly find anchor regions between parts of a read and the reference and evaluates them using a vectorized implementation of the Smith-Waterman (SW) algorithm. The resulting high-quality anchors are then used to determine whether a read spans an SV and has to be split or can be aligned contiguously. Finally, NextGenMap-LR uses a banded SW algorithm to compute the final alignment(s). In this last step, to account for both the sequencing error and real genomic variations, we employ a non-affine gap model that penalizes gap extensions for longer gaps less than for shorter ones. Based on simulated as well as verified human breast cancer SV data we show how our approach significantly improves mapping of long reads around SVs. The non-affine gap model is especially effective at more precisely identifying the position of the breakpoint, and the enhanced scoring scheme enables subsequent variation callers to identify SVs that would have been missed otherwise.

Read more
June 1, 2021  |  

Detection of structural variants using third generation sequencing

Structural Variants (SVs), which include deletions, insertions, duplications, inversions and chromosomal rearrangements, have been shown to effect organism phenotypes, including changing gene expression, increasing disease risk, and playing an important role in cancer development. Still it remains challenging to detect all types of SVs from high throughput sequencing data and it is even harder to detect more complex SVs such as a duplication nested within an inversion. To overcome these challenges we developed algorithms for SV analysis using longer third generation sequencing reads. The increased read lengths allow us to span more complex SVs and accurately assess SVs in repetitive regions, two of the major limitations when using short Illumina data. Our enhanced open-source analysis method Sniffles accurately detects structural variants based on split read mapping and assessment of the alignments. Sniffles uses a self-balancing interval tree in combination with a plane sweep algorithm to manage and assess the identified SVs. Central to its high accuracy is its advanced scoring model that can distinguish erroneous alignments from true breakpoints flanking SVs. In experiments with simulated and real genomes (e.g human breast cancer), we find that Sniffles outperforms all other SV analysis approaches in both the sensitivity of finding events as well as the specificity of those events. Sniffles is available at: https://github.com/fritzsedlazeck/Sniffles

Read more
June 1, 2021  |  

Comprehensive genome and transcriptome structural analysis of a breast cancer cell line using PacBio long read sequencing

Genomic instability is one of the hallmarks of cancer, leading to widespread copy number variations, chromosomal fusions, and other structural variations. The breast cancer cell line SK-BR-3 is an important model for HER2+ breast cancers, which are among the most aggressive forms of the disease and affect one in five cases. Through short read sequencing, copy number arrays, and other technologies, the genome of SK-BR-3 is known to be highly rearranged with many copy number variations, including an approximately twenty-fold amplification of the HER2 oncogene. However, these technologies cannot precisely characterize the nature and context of the identified genomic events and other important mutations may be missed altogether because of repeats, multi-mapping reads, and the failure to reliably anchor alignments to both sides of a variation. To address these challenges, we have sequenced SK-BR-3 using PacBio long read technology. Using the new P6-C4 chemistry, we generated more than 70X coverage of the genome with average read lengths of 9-13kb (max: 71kb). Using Lumpy for split-read alignment analysis, as well as our novel assembly-based algorithms for finding complex variants, we have developed a detailed map of structural variations in this cell line. Taking advantage of the newly identified breakpoints and combining these with copy number assignments, we have developed an algorithm to reconstruct the mutational history of this cancer genome. From this we have discovered a complex series of nested duplications and translocations between chr17 and chr8, two of the most frequent translocation partners in primary breast cancers, resulting in amplification of HER2. We have also carried out full-length transcriptome sequencing using PacBio’s Iso-Seq technology, which has revealed a number of previously unrecognized gene fusions and isoforms. Combining long-read genome and transcriptome sequencing technologies enables an in-depth analysis of how changes in the genome affect the transcriptome, including how gene fusions are created across multiple chromosomes. This analysis has established the most complete cancer reference genome available to date, and is already opening the door to applying long-read sequencing to patient samples with complex genome structures.

Read more
June 1, 2021  |  

Targeted sequencing of genes from soybean using NimbleGen SeqCap EZ and PacBio SMRT Sequencing

Full-length gene capture solutions offer opportunities to screen and characterize structural variations and genetic diversity to understand key traits in plants and animals. Through a combined Roche NimbleGen probe capture and SMRT Sequencing strategy, we demonstrate the capability to resolve complex gene structures often observed in plant defense and developmental genes spanning multiple kilobases. The custom panel includes members of the WRKY plant-defense-signaling family, members of the NB-LRR disease-resistance family, and developmental genes important for flowering. The presence of repetitive structures and low-complexity regions makes short-read sequencing of these genes difficult, yet this approach allows researchers to obtain complete sequences for unambiguous resolution of gene models. This strategy has been applied to genomic DNA samples from soybean coupled with barcoding for multiplexing.

Read more
June 1, 2021  |  

Long-read assembly of the Aedes aegypti Aag2 cell line genome resolves ancient endogenous viral elements

Transmission of arboviruses such as Dengue Virus by Aedes aegypti causes debilitating disease across the globe. Disease in humans can include severe acute symptoms such as hemorrhagic fever and organ failure, but mosquitoes tolerate high titers of virus in a persistent infection. The mechanisms responsible for this viral tolerance are unclear. Recent publications highlighted the integration of genetic material from non-retroviral RNA viruses into the genome of the host during infection that relies upon endogenous retro-transcriptase activity from transposons. These endogenous viral elements (EVEs) found in the genome are predicted to be ancient, and at least some EVEs are under purifying selection, suggesting they are beneficial to the host. To characterize EVE biogenesis in a tractable system, we sequenced the Ae. aegypti cell line, Aag2, to 58-fold coverage and present a de novo assembly of the genome. The assembly contains 1.7 Gb of genomic and 255 Mb of alternative haplotype specific sequence, consisting of contigs with a N50 of 1.4 Mb; a value that, when compared with other assemblies of the Aedes genus, is from 1-3 orders of magnitude longer. The Aag2 genome is highly repetitive (70%), most of which is classified as transposable elements (60%). We identify EVEs in the genome homologous to a range of extant viruses, many of which cluster in these regions of repetitive DNA. The contiguous assembly allows for more comprehensive identification of the transposable elements and EVEs that are most likely to be lost in assemblies lacking the read length of SMRT Sequencing.

Read more
June 1, 2021  |  

A comprehensive study of the sugar pine (Pinus lambertiana) transcriptome implemented through diverse next-generation sequencing approaches

The assembly, annotation, and characterization of the sugar pine (Pinus lambertiana Dougl.) transcriptome represents an opportunity to study the genetic mechanisms underlying resistance to the invasive white pine blister rust (Cronartium ribicola) as well as responses to other abiotic stresses. The assembled transcripts also provide a resource to improve the genome assembly. We selected a diverse set of tissues allowing the first comprehensive evaluation of the sugar pine gene space. We have combined short read sequencing technologies (Illumina MiSeq and HiSeq) with the relatively new Pacific Biosciences Iso-Seq approach. From the 2.5 billion and 1.6 million Illumina and PacBio (46 SMRT cells) reads, 33,720 unigenes were de novo assembled. Comparison of sequencing technologies revealed improved coverage with Illumina HiSeq reads and better splice variant detection with PacBio Iso-Seq reads. The genes identified as unique to each library ranges from 199 transcripts (basket seedling) to 3,482 transcripts (female cones). In total, 10,026 transcripts were shared by all libraries. Genes differentially expressed in response to these provided insight on abiotic and biotic stress responses. To analyze orthologous sequences, we compared the translated sequences against 19 plant species, identifying 7,229 transcripts that clustered uniquely among the conifers. We have generated here a high quality transcriptome from one WPBR susceptible and one WPBR resistant sugar pine individual. Through the comprehensive tissue sampling and the depth of the sequencing achieved, detailed information on disease resistance can be further examined.

Read more

Subscribe for blog updates:

Talk with an expert

If you have a question, need to check the status of an order, or are interested in purchasing an instrument, we're here to help.