Menu

Auto Tag: Human genome

July 7, 2019

Complex modular architecture around a simple toolkit of wing pattern genes

Identifying the genomic changes that control morphological variation and understanding how they generate diversity is a major goal of evolutionary biology. In Heliconius butterflies, a small number of genes control the development of diverse wing colour patterns. Here, we used full-genome sequencing of individuals across the Heliconius erato radiation and closely related species to characterize genomic variation associated with wing pattern diversity. We show that variation around colour pattern genes is highly modular, with narrow genomic intervals associated with specific differences in colour and pattern. This modular architecture explains the diversity of colour patterns and provides a flexible mechanism for rapid morphological diversification.

Read more
July 7, 2019

The value of new genome references.

Genomic information has become a ubiquitous and almost essential aspect of biological research. Over the last 10-15 years, the cost of generating sequence data from DNA or RNA samples has dramatically declined and our ability to interpret those data increased just as remarkably. Although it is still possible for biologists to conduct interesting and valuable research on species for which genomic data are not available, the impact of having access to a high quality whole genome reference assembly for a given species is nothing short of transformational. Research on a species for which we have no DNA or RNA sequence data is restricted in fundamental ways. In contrast, even access to an initial draft quality genome (see below for definitions) opens a wide range of opportunities that are simply not available without that reference genome assembly. Although a complete discussion of the impact of genome sequencing and assembly is beyond the scope of this short paper, the goal of this review is to summarize the most common and highest impact contributions that whole genome sequencing and assembly has had on comparative and evolutionary biology. Copyright © 2016. Published by Elsevier Inc.

Read more
July 7, 2019

Epigenetic origin of evolutionary novel centromeres.

Most evolutionary new centromeres (ENC) are composed of large arrays of satellite DNA and surrounded by segmental duplications. However, the hypothesis is that ENCs are seeded in an anonymous sequence and only over time have acquired the complexity of “normal” centromeres. Up to now evidence to test this hypothesis was lacking. We recently discovered that the well-known polymorphism of orangutan chromosome 12 was due to the presence of an ENC. We sequenced the genome of an orangutan homozygous for the ENC, and we focused our analysis on the comparison of the ENC domain with respect to its wild type counterpart. No significant variations were found. This finding is the first clear evidence that ENC seedings are epigenetic in nature. The compaction of the ENC domain was found significantly higher than the corresponding WT region and, interestingly, the expression of the only gene embedded in the region was significantly repressed.

Read more
July 7, 2019

Improving and correcting the contiguity of long-read genome assemblies of three plant species using optical mapping and chromosome conformation capture data.

Long-read sequencing can overcome the weaknesses of short reads in the assembly of eukaryotic genomes, however, at present additional scaffolding is needed to achieve chromosome-level assemblies. We generated PacBio long-read data of the genomes of three relatives of the model plant Arabidopsis thaliana and assembled all three genomes into only a few hundred contigs. To improve the contiguities of these assemblies, we generated BioNano Genomics optical mapping and Dovetail Genomics chromosome conformation capture data for genome scaffolding. Despite their technical differences, optical mapping and chromosome conformation capture performed similarly and doubled N50 values. After improving both integration methods, assembly contiguity reached chromosome-arm-levels. We rigorously assessed the quality of contigs and scaffolds using Illumina mate-pair libraries and genetic map information. This showed that PacBio assemblies have high sequence accuracy but can contain several misassemblies, which join unlinked regions of the genome. Most, but not all of these mis-joints were removed during the integration of the optical mapping and chromosome conformation capture data. Even though none of the centromeres was fully assembled, the scaffolds revealed large parts of some centromeric regions, even including some of the heterochromatic regions, which are not present in gold standard reference sequences. Published by Cold Spring Harbor Laboratory Press.

Read more
July 7, 2019

Variant tolerant read mapping using min-hashing

DNA read mapping is a ubiquitous task in bioinformatics, and many tools have been developed to solve the read mapping problem. However, there are two trends that are changing the landscape of readmapping: First, new sequencing technologies provide very long reads with high error rates (up to 15%). Second, many genetic variants in the population are known, so the reference genome is not considered as a single string over ACGT, but as a complex object containing these variants. Most existing read mappers do not handle these new circumstances appropriately.

Read more
July 7, 2019

Non hybrid long read consensus using local De Bruijn graph assembly

While second generation sequencing led to a vast increase in sequenced data, the shorter reads which came with it made assembly a much harder task and for some regions impossible with only short read data. This changed again with the advent of third generation long read sequencers. The length of the long reads allows a much better resolution of repetitive regions, their high error rate however is a major challenge. Using the data successfully requires to remove most of the sequencing errors. The first hybrid correction methods used low noise second generation data to correct third generation data, but this approach has issues when it is unclear where to place the short reads due to repeats and also because second generation sequencers fail to sequence some regions which third generation sequencers work on. Later non hybrid methods appeared. We present a new method for non hybrid long read error correction based on De Bruijn graph assembly of short windows of long reads with subsequent combination of these correct windows to corrected long reads. Our experiments show that this method yields a better correction than other state of the art non hybrid correction approaches.

Read more
July 7, 2019

Draft genome sequence of Karnal bunt pathogen (Tilletia indica) of wheat provides insights into the pathogenic mechanisms of quarantined fungus.

Karnal bunt disease in wheat is caused by hemibiotrophic fungus, Tilletia indica that has been placed as quarantine pest in more than 70 countries. Despite its economic importance, little knowledge about the molecular components of fungal pathogenesis is known. In this study, first time the genome sequence of T. indica has been deciphered for unraveling the effectors’ functions of molecular pathogenesis of Karnal bunt disease. The T. indica genome was sequenced employing hybrid approach of PacBio Single Molecule Real Time (SMRT) and Illumina HiSEQ 2000 sequencing platforms. The genome was assembled into 10,957 contigs (N50 contig length 3 kb) with total size of 26.7 Mb and GC content of 53.99%. The number of predicted putative genes were 11,535, which were annotated with Gene Ontology databases. Functional annotation of Karnal bunt pathogen genome and classification of identified effectors into protein families revealed interesting functions related to pathogenesis. Search for effectors’ genes using pathogen host interaction database identified 135 genes. The T. indica genome sequence and putative genes involved in molecular pathogenesis would further help in devising novel and effective disease management strategies including development of resistant wheat genotypes, novel biomarkers for pathogen detection and new targets for fungicide development.

Read more
July 7, 2019

A genomic view of short tandem repeats.

Short tandem repeats (STRs) are some of the fastest mutating loci in the genome. Tools for accurately profiling STRs from high-throughput sequencing data have enabled genome-wide interrogation of more than a million STRs across hundreds of individuals. These catalogs have revealed that STRs are highly multiallelic and may contribute more de novo mutations than any other variant class. Recent studies have leveraged these catalogs to show that STRs play a widespread role in regulating gene expression and other molecular phenotypes. These analyses suggest that STRs are an underappreciated but rich reservoir of variation that likely make significant contributions to Mendelian diseases, complex traits, and cancer. Copyright © 2017 Elsevier Ltd. All rights reserved.

Read more
July 7, 2019

Complete genome sequence of Bacillus subtilis strain 29R7-12, a piezophilic bacterium isolated from coal-bearing sediment 2.4 kilometers below the seafloor.

Here, we report the genome sequence of Bacillus subtilis strain 29R7-12, a piezophilic bacterium isolated from coal-bearing sediment down to ~2.4 km below the ocean floor in the northwestern Pacific. The strain is a Gram-positive spore-forming bacterium, closely related to Bacillus subtilis within the phylum Firmicutes This is the first complete genome sequence of a Bacillus subtilis strain from the deep biosphere. The genome sequence will provide a valuable resource for comparative studies of microorganisms from the surface and subsurface environments. Copyright © 2017 Wei et al.

Read more
July 7, 2019

A pipeline for local assembly of minisatellite alleles from single-molecule sequencing data.

The advent of Next Generation Sequencing (NGS) has led to the generation of enormous volumes of short read sequence data, cheaply and in reasonable time scales. Nevertheless, the quality of genome assemblies generated using NGS technologies has been greatly affected, compared to those generated using Sanger DNA sequencing. This is largely due to the inability of short read sequence data to scaffold repetitive structures, creating gaps, inversions and rearrangements and resulting in assemblies that are, at best, draft forms. Third generation single-molecule sequencing (SMS) technologies (e.g. Pacific Biosciences Single Molecule Real Time (SMRT) system) address this challenge by generating sequences with increased read lengths, offering the prospect to better recover these complex repetitive structures, concomitantly improving assembly quality.Here, we evaluate the ability of SMS data (specifically human genome Pacific Biosciences SMRT data) to recover poorly represented repetitive sequences (specifically, GC-rich human minisatellites). To do this we designed a pipeline for the collection, processing and local assembly of single-molecule sequence data to form accurate contiguous local reconstructions. Our results show the recovery of an allele of the non-coding minisatellite MS1 (located on chromosome 1 at 1p33-35) at greater than 97% identity to reference (GRCh38) from the unprocessed sequence data of a haploid complete hydatidiform mole (CHM1) cell line. Furthermore, our assembly revealed an allele of over 500 repeat units; much larger than the reference (GRCh38), but consistent in structure with naturally occurring alleles that are segregating in human populations. This local assembly’s reconstruction was validated with the release of the whole genome assemblies GCA_001297185.1 and GCA_000772585.3, where this allele occurs. Additionally, application of this pipeline to coding minisatellites in the PRDM9 and ZNF93 genes enabled recovery of high identity allele structures for these sequence regions whose length was confirmed by PCR from cell line genomic DNA. The internal repeat structure of the PRDM9 allele recovered was consistent with common human-specific alleles.Code available at https://github.com/ndliberial/smrt_pipeline CONTACT: dno2@le.ac.uk. © The Author 2016. Published by Oxford University Press.

Read more
July 7, 2019

Meta-aligner: long-read alignment based on genome statistics.

Current development of sequencing technologies is towards generating longer and noisier reads. Evidently, accurate alignment of these reads play an important role in any downstream analysis. Similarly, reducing the overall cost of sequencing is related to the time consumption of the aligner. The tradeoff between accuracy and speed is the main challenge in designing long read aligners.We propose Meta-aligner which aligns long and very long reads to the reference genome very efficiently and accurately. Meta-aligner incorporates available short/long aligners as subcomponents and uses statistics from the reference genome to increase the performance. Meta-aligner estimates statistics from reads and the reference genome automatically. Meta-aligner is implemented in C++ and runs in popular POSIX-like operating systems such as Linux.Meta-aligner achieves high recall rates and precisions especially for long reads and high error rates. Also, it improves performance of alignment in the case of PacBio long-reads in comparison with traditional schemes.

Read more
July 7, 2019

ThermoAlign: a genome-aware primer design tool for tiled amplicon resequencing.

Isolating and sequencing specific regions in a genome is a cornerstone of molecular biology. This has been facilitated by computationally encoding the thermodynamics of DNA hybridization for automated design of hybridization and priming oligonucleotides. However, the repetitive composition of genomes challenges the identification of target-specific oligonucleotides, which limits genetics and genomics research on many species. Here, a tool called ThermoAlign was developed that ensures the design of target-specific primer pairs for DNA amplification. This is achieved by evaluating the thermodynamics of hybridization for full-length oligonucleotide-template alignments – thermoalignments – across the genome to identify primers predicted to bind specifically to the target site. For amplification-based resequencing of regions that cannot be amplified by a single primer pair, a directed graph analysis method is used to identify minimum amplicon tiling paths. Laboratory validation by standard and long-range polymerase chain reaction and amplicon resequencing with maize, one of the most repetitive genomes sequenced to date (˜85% repeat content), demonstrated the specificity-by-design functionality of ThermoAlign. ThermoAlign is released under an open source license and bundled in a dependency-free container for wide distribution. It is anticipated that this tool will facilitate multiple applications in genetics and genomics and be useful in the workflow of high-throughput targeted resequencing studies.

Read more
July 7, 2019

Genomic innovation for crop improvement.

Crop production needs to increase to secure future food supplies, while reducing its impact on ecosystems. Detailed characterization of plant genomes and genetic diversity is crucial for meeting these challenges. Advances in genome sequencing and assembly are being used to access the large and complex genomes of crops and their wild relatives. These have helped to identify a wide spectrum of genetic variation and permitted the association of genetic diversity with diverse agronomic phenotypes. In combination with improved and automated phenotyping assays and functional genomic studies, genomics is providing new foundations for crop-breeding systems.

Read more
July 7, 2019

An improved genome assembly uncovers prolific tandem repeats in Atlantic cod.

The first Atlantic cod (Gadus morhua) genome assembly published in 2011 was one of the early genome assemblies exclusively based on high-throughput 454 pyrosequencing. Since then, rapid advances in sequencing technologies have led to a multitude of assemblies generated for complex genomes, although many of these are of a fragmented nature with a significant fraction of bases in gaps. The development of long-read sequencing and improved software now enable the generation of more contiguous genome assemblies.By combining data from Illumina, 454 and the longer PacBio sequencing technologies, as well as integrating the results of multiple assembly programs, we have created a substantially improved version of the Atlantic cod genome assembly. The sequence contiguity of this assembly is increased fifty-fold and the proportion of gap-bases has been reduced fifteen-fold. Compared to other vertebrates, the assembly contains an unusual high density of tandem repeats (TRs). Indeed, retrospective analyses reveal that gaps in the first genome assembly were largely associated with these TRs. We show that 21% of the TRs across the assembly, 19% in the promoter regions and 12% in the coding sequences are heterozygous in the sequenced individual.The inclusion of PacBio reads combined with the use of multiple assembly programs drastically improved the Atlantic cod genome assembly by successfully resolving long TRs. The high frequency of heterozygous TRs within or in the vicinity of genes in the genome indicate a considerable standing genomic variation in Atlantic cod populations, which is likely of evolutionary importance.

Read more
July 7, 2019

Efficient CNV breakpoint analysis reveals unexpected structural complexity and correlation of dosage-sensitive genes with clinical severity in genomic disorders.

Genomic disorders are the clinical conditions manifested by submicroscopic genomic rearrangements including copy number variants (CNVs). The CNVs can be identified by array-based comparative genomic hybridization (aCGH), the most commonly used technology for molecular diagnostics of genomic disorders. However, clinical aCGH only informs CNVs in the probe-interrogated regions. Neither orientational information nor the resulting genomic rearrangement structure is provided, which is a key to uncovering mutational and pathogenic mechanisms underlying genomic disorders. Long-range polymerase chain reaction (PCR) is a traditional approach to obtain CNV breakpoint junction, but this method is inefficient when challenged by structural complexity such as often found at the PLP1 locus in association with Pelizaeus-Merzbacher disease (PMD). Here we introduced ‘capture and single-molecule real-time sequencing’ (cap-SMRT-seq) and newly developed ‘asymmetry linker-mediated nested PCR walking’ (ALN-walking) for CNV breakpoint sequencing in 49 subjects with PMD-associated CNVs. Remarkably, 29 (94%) of the 31 CNV breakpoint junctions unobtainable by conventional long-range PCR were resolved by cap-SMRT-seq and ALN-walking. Notably, unexpected CNV complexities, including inter-chromosomal rearrangements that cannot be resolved by aCGH, were revealed by efficient breakpoint sequencing. These sequence-based structures of PMD-associated CNVs further support the role of DNA replicative mechanisms in CNV mutagenesis, and facilitate genotype-phenotype correlation studies. Intriguingly, the lengths of gained segments by CNVs are strongly correlated with clinical severity in PMD, potentially reflecting the functional contribution of other dosage-sensitive genes besides PLP1. Our study provides new efficient experimental approaches (especially ALN-walking) for CNV breakpoint sequencing and highlights their importance in uncovering CNV mutagenesis and pathogenesis in genomic disorders.© The Author 2017. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Read more

Subscribe for blog updates:

Talk with an expert

If you have a question, need to check the status of an order, or are interested in purchasing an instrument, we're here to help.