Menu

Auto Tag: Genetic

June 1, 2021  |  

Old school/new school genome sequencing: One step backward — a quantum leap forward.

As the costs for genome sequencing have decreased the number of “genome” sequences have increased at a rapid pace. Unfortunately, the quality and completeness of these so–called “genome” sequences have suffered enormously. We prefer to call such genome assemblies as “gene assembly space” (GAS). We believe it is important to distinguish GAS assemblies from reference genome assemblies (RGAs) as all subsequent research that depends on accurate genome assemblies can be highly compromised if the only assembly available is a GAS assembly.

Read more
June 1, 2021  |  

Genome analysis of a bacterium that causes lameness.

Lameness is a significant problem resulting in millions of dollars in lost revenue annually. In commercial broilers, the most common cause of lameness is bacterial chondronecrosis with osteomyelitis (BCO). We are using a wire flooring model to induce lameness attributable to BCO. We used 16S ribosomal DNA sequencing to determine that Staphylococcus spp. were the main species associated with BCO. Staphylococcus agnetis, which previously had not been isolated from poultry, was the principal species isolated from the majority of the bone lesion samples. Administering S. agnetis in the drinking water to broilers reared on wire flooring increased the incidence of BCO three-fold when compared with broilers drinking tap water (P = 0.001). We found that the minimum effective dose of Staphylococcus agnetis to induce BCO in broilers grown on wire flooring experiment is 105 cfu/ml. We used PacBio and Illumina sequencing to assemble a 2.4 Mbp contig representing the genome and a 34 kbp contig for the largest plasmid of S. agnetis. Annotation of this genome is underway through comparative genomics with other Staphylococcus genomes, and identification of virulence factors. Our goal is to elucidate genetic diversity, toxins, and pathogenicity determinants, for this poorly characterized species. Isolating pathogenic bacterial species, defining their likely route of transmission to broilers, and genomic analyses will contribute substantially to the development of measures for mitigating BCO losses in poultry.

Read more
June 1, 2021  |  

Comparative genome analysis of Clavibacter michiganensis subsp. michiganensis strains provides insights into genetic diversity and virulence.

Clavibacter michiganensis subsp. michiganensis (Cmm) is a gram positive actinomycete, causing bacterial canker of tomato (Solanum lycopersicum) a disease that can cause significant losses in tomato production. In this study, we determined the complete genome sequence of 13 California Cmm strains and one saprophytic Clavibacter strain using a combination of Ilumina and PacBio sequencing. The California Cmm strains have genome size (3.2 -3.3 mb) similar to the reference strain NCPPB382 (3.3 mb) with =98% sequence identity. Cmm strains from California share =92% genes (8-10% are noble genes) with the reference Cmm strain NCPPB382. Despite this similarity, we detected significant alternatives in California strains with respect to plasmid number, plasmid composition, and genomic island presence indicating acquisition of unique mechanisms controlling virulence. Plasmids pCM1 and pCM2, that were previously demonstrated to be required for NCPPB382 virulence, also differ in their presence and gene content across Cmm strains. pCM2 is absent in some Cmm strains and that still retain virulence in tomato. Saprophytic Clavibacter possess a novel plasmid, pSCM, and lacks the majority of characterized virulence factors. Genome sequence information was also used to design specific and sensitive primer pairs for Cmm detection. A mechanistic understanding of how genomic changes have impacted Cmm virulence and survival across diverse strains will be necessary for developing a robust disease control strategies for bacterial canker of tomato.

Read more
June 1, 2021  |  

Genome assembly strategies of the recent polyploid, Coffea arabica.

Arabica coffee, revered for its taste and aroma, has a complex genome. It is an allotetraploid (2n=4x=44) with a genome size of approximately 1.3 Gb, derived from the recent (< 0.6 Mya) hybridization of two diploid progenitors (2n=2x=22), C. canephora (710 Mb) and C. eugenioides (670 Mb). Both parental species diverged recently (< 4.2Mya) and their genomes are highly homologous. To facilitate assembly, a dihaploid plant was chosen for sequencing. Initial genome assembly attempts with short read data produced an assembly covering 1,031 Mb of the C. arabica genome with a contig L50 of 9kb. By implementation of long read PacBio at greater than 50x coverage and cutting-edge PacBio software, a de novo PacBio-only genome assembly was constructed that covers 1,042 Mb of the genome with an L50 of 267 kb. The two assemblies were assessed and compared to determine gene content, chimeric regions, and the ability to separate the parental genomes. A genetic map that contains 600 SSRs is being used for anchoring the contigs and improve the sub-genome differentiation together with the search of sub-genome specific SNPs. PacBio transcriptome sequencing is currently being added to finalize gene annotation of the polished assembly. The finished genome assembly will be used to guide re-sequencing assemblies of parental genomes (C. canephora and C. eugenioides) as well as a template for GBS analysis and whole genome re-sequencing of a set of C. arabica accessions representative of the species diversity. The obtained data will provide powerful genomic tools to enable more efficient coffee breeding strategies for this crop, which is highly susceptible to climate change and is the main source of income for millions of small farmers in producing countries.

Read more
June 1, 2021  |  

Complete microbial genomes, epigenomes, and transcriptomes using long-read PacBio Sequencing.

For comprehensive metabolic reconstructions and a resulting understanding of the pathways leading to natural products, it is desirable to obtain complete information about the genetic blueprint of the organisms used. Traditional Sanger and next-generation, short-read sequencing technologies have shortcomings with respect to read lengths and DNA-sequence context bias, leading to fragmented and incomplete genome information. The development of long-read, single molecule, real-time (SMRT) DNA sequencing from Pacific Biosciences, with >10,000 bp average read lengths and a lack of sequence context bias, now allows for the generation of complete genomes in a fully automated workflow. In addition to the genome sequence, DNA methylation is characterized in the process of sequencing. PacBio® sequencing has also been applied to microbial transcriptomes. Long reads enable sequencing of full-length cDNAs allowing for identification of complete gene and operon sequences without the need for transcript assembly. We will highlight several examples where these capabilities have been leveraged in the areas of industrial microbiology, including biocommodities, biofuels, bioremediation, new bacteria with potential commercial applications, antibiotic discovery, and livestock/plant microbiome interactions.

Read more
June 1, 2021  |  

The resurgence of reference quality genome sequence.

Since the advent of Next-Generation Sequencing (NGS), the cost of de novo genome sequencing and assembly have dropped precipitately, which has spurred interest in genome sequencing overall. Unfortunately the contiguity of the NGS assembled sequences, as well as the accuracy of these assemblies have suffered. Additionally, most NGS de novo assemblies leave large portions of genomes unresolved, and repetitive regions are often collapsed. When compared to the reference quality genome sequences produced before the NGS era, the new sequences are highly fragmented and often prove to be difficult to properly annotate. In some cases the contiguous portions are smaller than the average gene size making the sequence not nearly as useful for biologists as the earlier reference quality genomes including of Human, Mouse, C. elegans, or Drosophila. Recently, new 3rd generation sequencing technologies, long-range molecular techniques, and new informatics tools have facilitated a return to high quality assembly. We will discuss the capabilities of the technologies and assess their impact on assembly projects across the tree of life from small microbial and fungal genomes through large plant and animal genomes. Beyond improvements to contiguity, we will focus on the additional biological insights that can be made with better assemblies, including more complete analysis genes in their flanking regulatory context, in-depth studies of transposable elements and other complex gene families, and long-range synteny analysis of entire chromosomes. We will also discuss the need for new algorithms for representing and analyzing collections of many complete genomes at once.

Read more
June 1, 2021  |  

Sequencing complex mixtures of HIV-1 genomes with single-base resolution.

A large number of distinct HIV-1 genomes can be present in a single clinical sample from a patient chronically infected with HIV-1. We examined samples containing complex mixtures of near-full-length HIV-1 genomes. Single molecules were sequenced as near-full-length (9.6 kb) amplicons directly from PCR products without shearing. Mathematical analysis techniques deconvolved the complex mixture of reads into estimates of distinct near-full-length viral genomes with their relative abundances. We correctly estimated the originating genomes to single-base resolution along with their relative abundances for mixtures where the truth was known exactly by independent sequencing methods. Correct estimates were made even when genomes diverged by a single base. Minor abundances of 5% were reliably detected. SMRT Sequencing data contained near-full-length continuous reads for each sample including some runs with greater than 10,000 near-full-length-genome reads in a three-hour collection time. SMRT Sequencing yields long- read sequencing results from individual DNA molecules with a rapid time-to-result. The single-molecule, full-length nature of the sequencing method allows us to estimate variant subspecies and relative abundances even from samples containing complex mixtures of genomes that differ by single bases. These results open the possibility of cost-effective full-genome sequencing of HIV-1 in mixed populations for applications such as incorporated-HIV-1 screening. In screening, genomes can differ by one to many thousands of bases and the ability to measure them can help scientifically inform treatment strategies.

Read more
June 1, 2021  |  

Toward comprehensive genomics analysis with de novo assembly.

Whole genome sequencing can provide comprehensive information important for determining the biochemical and genetic nature of all elements inside a genome. The high-quality genome references produced from past genome projects and advances in short-read sequencing technologies have enabled quick and cheap analysis for simple variants. However even with the focus on genome-wide resequencing for SNPs, the heritability of more than 50% of human diseases remains elusive. For non-human organisms, high-contiguity references are deficient, limiting the analysis of genomic features. The long and unbiased reads from single molecule, real-time (SMRT) Sequencing and new de novo assembly approaches have demonstrated the ability to detect more complicated variants and chromosome-level phasing. Moreover, with the recent advance of bioinformatics algorithms and tools, the computation tasks for completing high-quality de novo assembly of large genomes becomes feasible with commodity hardware. Ongoing development in sequencing technologies and bioinformatics will likely lead to routine generation of high-quality reference assemblies in the future. We discuss the current state of art and the challenges in bioinformatics toward such a goal. More specifically, explicit examples of pragmatic computational requirements for assembling mammalian-size genomes and algorithms suitable for processing diploid genomes are discussed.

Read more
June 1, 2021  |  

Complete resequencing of extended genomic regions using fosmid target capture and single molecule real-time (SMRT) long read sequencing technology.

A longstanding goal of genomic analysis is the identification of causal genetic factors contributing to disease. While the common disease/common variant hypothesis has been tested in many genome-wide association studies, few advancements in identifying causal variation have been realized, and instead recent findings point away from common variants towards aggregate rare variants as causal. A challenge is obtaining complete phased genomic sequences over extended genomic regions from sufficient numbers of cases and controls to identify all potential variation causal of a disease. To address this, we modified methods for targeted DNA isolation using fosmid technology and single-molecule, long-sequence-read generaton that combine for complete, haplotype-resolved resequencing across extended genomic subregions. As proof of principal, we validated the approach by resequencing four 800 kbp segments that span a major histocompatibility complex (MHC) common extended haplotype (CEH) associated with disease. The data revealed the extent of conservation exposing a near identity among four DR4 CEHs over conserved regions, detailing rare variation and measuring sequence accuracy. In a second test, we sequenced the complete KIR haplotypes from 8 individuals within a specific timeframe and cost. Single molecule long-read sequencing technology generated contiguous full-­length fosmid sequences of 30 to 40 kb in a single read, allowing assembly of resolved haplotypes with very little data processing. All of the sequences produced from these projects were contiguous, phased, with accuracy above 99.99%. The results demonstrated that cost-effective scale-­up is possible to generate scores to hundreds of phased chromosomal sequences of extended lengths that can encompass genomic regions associated with disease.

Read more
June 1, 2021  |  

High-accuracy, single-base resolution of near-full-length HIV genomes.

Background: The HIV-1 proviral reservoir is incredibly stable, even while undergoing antiretroviral therapy, and is seen as the major barrier to HIV-1 eradication. Identifying and comprehensively characterizing this reservoir will be critical to achieving an HIV cure. Historically, this has been a tedious and labor intensive process, requiring high-replicate single-genome amplification reactions, or overlapping amplicons that are then reconstructed into full-length genomes by algorithmic imputation. Here, we present a deep sequencing and analysis method able to determine the exact identity and relative abundances of near-full-length HIV genomes from samples containing mixtures of genomes without shearing or complex bioinformatic reconstruction. Methods: We generated clonal near-full-length (~9 kb) amplicons derived from single genome amplification (SGA) of primary proviral isolates or PCR of well-documented control strains. These clonal products were mixed at various abundances and sequenced as near-full-length (~9 kb) amplicons without shearing. Each mixture yielded many near-full-length HIV-1 reads. Mathematical analysis techniques resolved the complex mixture of reads into estimates of distinct near-full-length viral genomes with their relative abundances. Results: Single Molecule, Real-Time (SMRT) Sequencing data contained near-full-length (~9 kb) continuous reads for each sample including some runs with greater than 10,000 near-full-length-genome reads in a three-hour sequencing run. Our methods correctly recapitulated exactly the originating genomes at a single-base resolution and their relative abundances in both mixtures of clonal controls and SGAs, and these results were validated using independent sequencing methods. Correct resolution was achieved even when genomes differed only by a single base. Minor abundances of 5% were reliably detected. Conclusions: SMRT Sequencing yields long-read sequencing results from individual DNA molecules, a rapid time-to-result. The single-molecule, full-length nature of this sequencing method allows us to estimate variant subspecies and relative abundances with single-nucleotide resolution. This method allows for reference-agnostic and cost-effective full-genome sequencing of HIV-1, which could both further our understanding of latent infection and develop novel and improved tools for quantifying HIV provirus, which will be critical to cure HIV.

Read more
June 1, 2021  |  

Full-length isoform sequencing of the human MCF-7 cell line using PacBio long reads.

While advances in RNA sequencing methods have accelerated our understanding of the human transcriptome, isoform discovery remains a challenge because short read lengths require complicated assembly algorithms to infer the contiguity of full-length transcripts. With PacBio’s long reads, one can now sequence full-length transcript isoforms up to 10 kb. The PacBio Iso- Seq protocol produces reads that originate from independent observations of single molecules, meaning no assembly is needed. Here, we sequenced the transcriptome of the human MCF-7 breast cancer cell line using the Clontech SMARTer® cDNA preparation kit and the PacBio RS II. Using PacBio Iso-Seq bioinformatics software, we obtained 55,770 unique, full-length, high-quality transcript sequences that were subsequently mapped back to the human genome with = 99% accuracy. In addition, we identified both known and novel fusion transcripts. To assess our results, we compared the predicted ORFs from the PacBio data against a published mass spectrometry dataset from the same cell line. 84% of the proteins identified with the Uniprot protein database were recovered by the PacBio predictions. Notably, 251 peptides solely matched to the PacBio generated ORFs and were entirely novel, including abundant cases of single amino acid polymorphisms, cassette exon splicing and potential alternative protein coding frames.

Read more
June 1, 2021  |  

Highly contiguous de novo human genome assembly and long-range haplotype phasing using SMRT Sequencing

The long reads, random error, and unbiased sampling of SMRT Sequencing enables high quality, de novo assembly of the human genome. PacBio long reads are capable of resolving genomic variations at all size scales, including SNPs, insertions, deletions, inversions, translocations, and repeat expansions, all of which are important in understanding the genetic basis for human disease and difficult to access via other technologies. In demonstration of this, we report a new high-quality, diploid aware de novo assembly of Craig Venter’s well-studied genome.

Read more
June 1, 2021  |  

The Wild Vigna

PacBio 2015 User Group Meeting Presentation Slides: Ken Naito of the NIAS Genetic Resource Center presented on whole genome sequencing of the azuki bean (Vigna angularis). Using single molecule real-time (SMRT) sequencing technology, they achieved the best contiguity and coverage among currently assembled legume crops.

Read more

Subscribe for blog updates:

Talk with an expert

If you have a question, need to check the status of an order, or are interested in purchasing an instrument, we're here to help.