Menu
July 7, 2019  |  

Haemonchus contortus: genome structure, organization and comparative genomics

One of the first genome sequencing projects for a parasitic nematode was that for Haemonchus contortus. The open access data from the Wellcome Trust Sanger Institute provided a valuable early resource for the research community, particularly for the identification of specific genes and genetic markers. Later, a second sequencing project was initiated by the University of Melbourne, and the two draft genome sequences for H. contortus were published back-to-back in 2013. There is a pressing need for long-range genomic information for genetic mapping, population genetics and functional genomic studies, so we are continuing to improve the Wellcome Trust Sanger Institute assembly to provide a finished reference genome for H. contortus. This review describes this process, compares the H. contortus genome assemblies with draft genomes from other members of the strongylid group and discusses future directions for parasite genomics using the H. contortus model. Copyright © 2016 Elsevier Ltd. All rights reserved.


July 7, 2019  |  

Antibiotic resistance mechanisms of Myroides sp.

Bacteria of the genus Myroides (Myroides spp.) are rare opportunistic pathogens. Myroides sp. infections have been reported mainly in China. Myroides sp. is highly resistant to most available antibiotics, but the resistance mechanisms are not fully elucidated. Current strain identification methods based on biochemical traits are unable to identify strains accurately at the species level. While 16S ribosomal RNA (rRNA) gene sequencing can accurately achieve this, it fails to give information on the status and mechanisms of antibiotic resistance, because the 16S rRNA sequence contains no information on resistance genes, resistance islands or enzymes. We hypothesized that obtaining the whole genome sequence of Myroides sp., using next generation sequencing methods, would help to clarify the mechanisms of pathogenesis and antibiotic resistance, and guide antibiotic selection to treat Myroides sp. infections. As Myroides sp. can survive in hospitals and the environment, there is a risk of nosocomial infections and pandemics. For better management of Myroides sp. infections, it is imperative to apply next generation sequencing technologies to clarify the antibiotic resistance mechanisms in these bacteria.


July 7, 2019  |  

Resurgence of less-studied smut fungi as models of phytopathogenesis in the -omics era.

The smut fungi form a large, diverse, and non-monophyletic group of plant pathogens that have long served as both important pests of human agriculture but also as fertile organisms of scientific investigation. As modern techniques of molecular genetic analysis became available, many previously-studied species that proved refractive to these techniques fell by the wayside to become neglected. Now, as the advent of rapid and affordable next-generation sequencing provides genomic and transcriptomic resources for even these “forgotten” fungi, several species are making a come-back and retaking prominent places in phytopathogenic research. In this review, we highlight several of these smut fungi, with special emphasis on Microbotryum lychnidis-dioicae, an anther smut, whose molecular genetic tools have finally begun to catch up with its historical importance in classical genetics and now provide mechanistic insights for ecological studies, evolution of host/pathogen interaction, and investigations of emerging infectious disease.


July 7, 2019  |  

A roadmap for gene system development in Clostridium.

Clostridium species are both heroes and villains. Some cause serious human and animal diseases, those present in the gut microbiota generally contribute to health and wellbeing, while others represent useful industrial chassis for the production of chemicals and fuels. To understand, counter or exploit, there is a fundamental requirement for effective systems that may be used for directed or random genome modifications. We have formulated a simple roadmap whereby the necessary gene systems maybe developed and deployed. At its heart is the use of ‘pseudo-suicide’ vectors and the creation of a pyrE mutant (a uracil auxotroph), initially aided by ClosTron technology, but ultimately made using a special form of allelic exchange termed ACE (Allele-Coupled Exchange). All mutants, regardless of the mutagen employed, are made in this host. This is because through the use of ACE vectors, mutants can be rapidly complemented concomitant with correction of the pyrE allele and restoration of uracil prototrophy. This avoids the phenotypic effects frequently observed with high copy number plasmids and dispenses with the need to add antibiotic to ensure plasmid retention. Once available, the pyrE host may be used to stably insert all manner of application specific modules. Examples include, a sigma factor to allow deployment of a mariner transposon, hydrolases involved in biomass deconstruction and therapeutic genes in cancer delivery vehicles. To date, provided DNA transfer is obtained, we have not encountered any clostridial species where this technology cannot be applied. These include, Clostridium difficile, Clostridium acetobutylicum, Clostridium beijerinckii, Clostridium botulinum, Clostridium perfringens, Clostridium sporogenes, Clostridium pasteurianum, Clostridium ljungdahlii, Clostridium autoethanogenum and even Geobacillus thermoglucosidasius. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.


July 7, 2019  |  

Genomic dark matter illuminated: Anopheles Y chromosomes.

Hall et al. have strategically used long-read sequencing technology to characterize the structure and highly repetitive content of the Y chromosome in Anopheles malaria mosquitoes. Their work confirms that this important but elusive heterochromatic sex chromosome is evolving extremely rapidly and harbors a remarkably small number of genes. Copyright © 2016 Elsevier Ltd. All rights reserved.


July 7, 2019  |  

Structural variation detection using next-generation sequencing data: A comparative technical review.

Structural variations (SVs) are mutations in the genome of size at least fifty nucleotides. They contribute to the phenotypic differences among healthy individuals, cause severe diseases and even cancers by breaking or linking genes. Thus, it is crucial to systematically profile SVs in the genome. In the past decade, many next-generation sequencing (NGS)-based SV detection methods have been proposed due to the significant cost reduction of NGS experiments and their ability to unbiasedly detect SVs to the base-pair resolution. These SV detection methods vary in both sensitivity and specificity, since they use different SV-property-dependent and library-property-dependent features. As a result, predictions from different SV callers are often inconsistent. Besides, the noises in the data (both platform-specific sequencing error and artificial chimeric reads) impede the specificity of SV detection. Poorly characterized regions in the human genome (e.g., repeat regions) greatly impact the reads mapping and in turn affect the SV calling accuracy. Calling of complex SVs requires specialized SV callers. Apart from accuracy, processing speed of SV caller is another factor deciding its usability. Knowing the pros and cons of different SV calling techniques and the objectives of the biological study are essential for biologists and bioinformaticians to make informed decisions. This paper describes different components in the SV calling pipeline and reviews the techniques used by existing SV callers. Through simulation study, we also demonstrate that library properties, especially insert size, greatly impact the sensitivity of different SV callers. We hope the community can benefit from this work both in designing new SV calling methods and in selecting the appropriate SV caller for specific biological studies. Copyright © 2016 Elsevier Inc. All rights reserved.


July 7, 2019  |  

Chloroplast genomes: diversity, evolution, and applications in genetic engineering.

Chloroplasts play a crucial role in sustaining life on earth. The availability of over 800 sequenced chloroplast genomes from a variety of land plants has enhanced our understanding of chloroplast biology, intracellular gene transfer, conservation, diversity, and the genetic basis by which chloroplast transgenes can be engineered to enhance plant agronomic traits or to produce high-value agricultural or biomedical products. In this review, we discuss the impact of chloroplast genome sequences on understanding the origins of economically important cultivated species and changes that have taken place during domestication. We also discuss the potential biotechnological applications of chloroplast genomes.


July 7, 2019  |  

Challenges, solutions, and quality metrics of personal genome assembly in advancing precision medicine.

Even though each of us shares more than 99% of the DNA sequences in our genome, there are millions of sequence codes or structure in small regions that differ between individuals, giving us different characteristics of appearance or responsiveness to medical treatments. Currently, genetic variants in diseased tissues, such as tumors, are uncovered by exploring the differences between the reference genome and the sequences detected in the diseased tissue. However, the public reference genome was derived with the DNA from multiple individuals. As a result of this, the reference genome is incomplete and may misrepresent the sequence variants of the general population. The more reliable solution is to compare sequences of diseased tissue with its own genome sequence derived from tissue in a normal state. As the price to sequence the human genome has dropped dramatically to around $1000, it shows a promising future of documenting the personal genome for every individual. However, de novo assembly of individual genomes at an affordable cost is still challenging. Thus, till now, only a few human genomes have been fully assembled. In this review, we introduce the history of human genome sequencing and the evolution of sequencing platforms, from Sanger sequencing to emerging “third generation sequencing” technologies. We present the currently available de novo assembly and post-assembly software packages for human genome assembly and their requirements for computational infrastructures. We recommend that a combined hybrid assembly with long and short reads would be a promising way to generate good quality human genome assemblies and specify parameters for the quality assessment of assembly outcomes. We provide a perspective view of the benefit of using personal genomes as references and suggestions for obtaining a quality personal genome. Finally, we discuss the usage of the personal genome in aiding vaccine design and development, monitoring host immune-response, tailoring drug therapy and detecting tumors. We believe the precision medicine would largely benefit from bioinformatics solutions, particularly for personal genome assembly.


July 7, 2019  |  

Bacterial genetics: SMRT-seq reveals an epigenetic switch.

Streptococcus pneumoniae uses genetic diversification as a strategy to achieve phenotypic plasticity. For example, DNA inversion of the hsdS genes of type I restriction-modification (R-M) systems determines whether S. pneumoniae forms opaque or transparent colonies, which have different colonization and virulence characteristics. Zhang and colleagues now use single-molecule, real-time sequencing (SMRT-seq) to show the allelic variation of hsdS that results from site-specific recombination forms part of an epigenetic switch.


July 7, 2019  |  

The report of my death was an exaggeration: A review for researchers using microsatellites in the 21st century.

Microsatellites, or simple sequence repeats (SSRs), have long played a major role in genetic studies due to their typically high polymorphism. They have diverse applications, including genome mapping, forensics, ascertaining parentage, population and conservation genetics, identification of the parentage of polyploids, and phylogeography. We compare SSRs and newer methods, such as genotyping by sequencing (GBS) and restriction site associated DNA sequencing (RAD-Seq), and offer recommendations for researchers considering which genetic markers to use. We also review the variety of techniques currently used for identifying microsatellite loci and developing primers, with a particular focus on those that make use of next-generation sequencing (NGS). Additionally, we review software for microsatellite development and report on an experiment to assess the utility of currently available software for SSR development. Finally, we discuss the future of microsatellites and make recommendations for researchers preparing to use microsatellites. We argue that microsatellites still have an important place in the genomic age as they remain effective and cost-efficient markers.


July 7, 2019  |  

Whole-genome sequencing recommendations

Recent technological developments have revolutionized the way we perform genetic analyses. In particular whole-genome sequencing provides access to the entire genetic makeup of an individual, and it is now an affordable approach for many research groups. As a consequence genome sequencing is pervading many fields of biological research. Sequencing technologies are evolving rapidly and so do their applications. Here we provide a first primer on whole-genome sequencing, focusing on two of the most popular applications: (1) de novo genome sequencing, in which the objective is obtaining a high-quality genome assembly that can serve as a reference for a species or variety, and (2) genome resequencing, when there is an available reference genome and the objective is to map sequence variation of an individual or a set of individuals. It is not our intention to provide a comprehensive overview of current methodologies that will likely soon become obsolete, but rather focus on general principles that will have a more general applicability.


July 7, 2019  |  

Use of genomic approaches in understanding the role of Actinomycetes as PGP in grain legumes

The advancement in molecular technologies has given a breakthrough to explore the untapped and novel microbial isolates for characterization in every aspect as we can consider microbes as an important primary natural store house for key secondary metabolites and enzymes. Actinomycetes are the most fruitful source of microorganisms for all types of bioactive secondary metabolites, including agroactive-antibiotic molecules that are best recognized and most valuable for their role in agriculture and industries. In agriculture, actinomycetes are used as biocontrol agents against some pests and pathogenic organisms as well as plant growth-promoting (PGP) agents for crops. Use of different molecular methods, e.g., metagenomics, metatranscriptomics, genetic fingerprinting, proteogenomics, and metaproteomics, are more significant for classifying and discovering the immense diversity in microbial population and for understanding their interactions with other abiotic and biotic environmental elements. The opportunity of accessing inexpensive sequencing techniques has led to the assemblies of copious genomic data for actinomycetes, such as Streptomyces and related species, with the goal of discovering novel bioactive metabolic and their utility as PGP; however, the use of actinomycetes in agriculture using genomic approaches is in its initial stages.


July 7, 2019  |  

Strategies for sequence assembly of plant genomes

The field of plant genome assembly has greatly benefited from the development and widespread adoption of next-generation DNA sequencing platforms. Very high sequencing throughputs and low costs per nucleotide have considerably reduced the technical and budgetary constraints associated with early assembly projects done primarily with a traditional Sanger-based approach. Those improvements led to a sharp increase in the number of plant genomes being sequenced, including large and complex genomes of economically important crops. Although next-generation DNA sequencing has considerably improved our understanding of the overall structure and dynamics of many plant genomes, severe limitations still remain because next-generation DNA sequencing reads typically are shorter than Sanger reads. In addition, the software tools used to de novo assemble sequences are not necessarily designed to optimize the use of short reads. These cause challenges, common to many plant species with large genome sizes, high repeat contents, polyploidy and genome-wide duplications. This chapter provides an overview of historical and current methods used to sequence and assemble plant genomes, along with new solutions offered by the emergence of technologies such as single molecule sequencing and optical mapping to address the limitations of current sequence assemblies.


July 7, 2019  |  

Next-generation sequencing: a diagnostic one-stop shop for Hepatitis C?

Before starting chronic hepatitis C treatment, the viral genotype/subtype has to be accurately determined and potentially coupled with drug resistance testing. Due to the high genetic variability of the hepatitis C virus, this can be a demanding task that can potentially be streamlined by viral whole-genome sequencing using next-generation sequencing as demonstrated by an article in this issue of the Journal of Clinical Microbiology by E. Thomson, C. L. C. Ip, A. Badhan, M. T. Christiansen, W. Adamson, et al. (J Clin Microbiol. 54:2455-2469, 2016, http://dx.doi.org/10.1128/JCM.00330-16). Copyright © 2016, American Society for Microbiology. All Rights Reserved.


Talk with an expert

If you have a question, need to check the status of an order, or are interested in purchasing an instrument, we're here to help.