Menu

Auto Tag: Scaffold N50

June 1, 2021  |  

Progress on the reassembly and annotation of the goat genome.

The goat (Capra hircus) remains an important livestock species due to the species’ ability to forage and provide milk, meat and wool in arid environments. The current goat reference assembly and annotation borrows heavily from other loosely related livestock species, such as cattle, and may not reflect the unique structural and functional characteristics of the species. We present preliminary data from a new de novo reference assembly for goat that primarily utilizes 38 million PacBio P5-C3 reads generated from an inbred San Clemente goat. This assembly consists of only 5,902 contigs with a contig N50 size of 2.56 megabases which were grouped into scaffolds using cis-chromosome associations generated by the analysis of Hi-C sequence reads. To provide accurate functional genetic annotation, we utilized existing RNA-seq data and generated new data consisting of over 784 million reads from a combination of 27 different developmental timepoints/tissues. This dataset provides a tangible improvement over existing goat genomics resources by correcting over 247 misassemblies in the current goat reference genome and by annotating predicted gene models with actual expressed transcript data. Our goal is to provide a high quality resource to researchers to enable future genomic selection and functional prediction within the field of goat genomics.

Read more
June 1, 2021  |  

A genome assembly of the domestic goat from 70x coverage of single molecule, real-time sequence.

Goat is an important source of milk, meat, and fiber, especially in developing countries. An advantage of goats as livestock is the low maintenance requirements and high adaptability compared to other milk producers. The global population of domestic goats exceeds 800 million. In Africa, goat production is characterized by low productivity levels, and attempts to introduce more productive breeds have met with poor success due in part to nutritional constraints. It has been suggested that incorporation of selective breeding within the herds adapted for survival could represent one approach to improving food security across Africa. A recently produced genome assembly of a Chinese Yunnan breed goat, based on 192 Gb of short reads across a range of insert sizes from 180 bp to 20 kb, reported a contig N50 of 18.7 kb. The scaffold N50 was improved from 2.2 Mb to 3.1 Mb by addition of fosmid end sequence, with an estimated 140 million Ns in gaps and 91% coverage. The assembly has proven somewhat problematic for pursuing genome-wide association analysis with SNP arrays, apparently due in part to errors in ordering of markers using the draft genome. In order to provide a higher quality assembly, we sequenced a highly inbred, San Clemente breed goat genome using 458 SMRT cells on the Pacific Biosciences platform. These cells generated 193.5 Gbases of sequence after processing into subreads, with mean 5110 bases and max subread length of 40.5 kb. This sequence data generated an assembly using the recently reported MHAP error correction approach and Celera Assembler v8.2. The contig N50 was 2.5 Mb, with the largest contig spanning 19.5 Mb. Additional characteristics of the assembly will be presented.

Read more
June 1, 2021  |  

De novo assembly of a complex panicoid grass genome using ultra-long PacBio reads with P6C4 chemistry

Drought is responsible for much of the global losses in crop yields and understanding how plants naturally cope with drought stress is essential for breeding and engineering crops for the changing climate. Resurrection plants desiccate to complete dryness during times of drought, then “come back to life” once water is available making them an excellent model for studying drought tolerance. Understanding the molecular networks governing how resurrection plants handle desiccation will provide targets for crop engineering. Oropetium thomaeum (Oro) is a resurrection plant that also has the smallest known grass genome at 250 Mb compared to Brachypodium distachyon (300 Mb) and rice (350 Mb). Plant genomes, especially grasses, have complex repeat structures such as telomeres, centromeres, and ribosomal gene cassettes, and high heterozygosity, which makes them difficult to assembly using short read next generation sequencing technologies. Ultra-long PacBio reads using the new P6C4 chemistry and the latest 15kb Blue Pippin size-selection protocol to generate 20kb insert libraries that yielded an average read length of 12kb providing ~72X coverage, and 10X coverage with reads over 20kb. The HGAP assembly covers 98% of the genome with a contig N50 of 2.4 Mb, which makes it one of the highest quality and most complete plant genomes assembled to date. Oro has a compact genome structure compared to other grasses with only 16% repeat sequences but has very good collinearity with other grasses. Understanding the genomic mechanisms of extreme desiccation tolerance in resurrection plants like Oro will provide insights for engineering and intelligent breeding of improved food, fuel, and fiber crops.

Read more
June 1, 2021  |  

Improving the goat long-read assembly with optical mapping and Hi-C scaffolding

Reference genome assemblies provide important context in genetics by standardizing the order of genes and providing a universal set of coordinates for individual nucleotides. Often due to the high complexity of genic regions and higher copy number of genes involved in immune function, immunity-related genes are often misassembled in current reference assemblies. This problem is particularly ubiquitous in the reference genomes of non-model organisms as they often do not receive the years of curation necessary to resolve annotation and assembly errors. In this study, we reassemble a reference genome of the goat (Capra hircus) using modern PacBio technology in tandem with BioNano Genomics Irys optical maps and Lachesis clustering in order to provide a high quality reference assembly without the need for extensive filtering. Initial PacBio assemblies using P5C4 chemistry achieved contig N50’s of 4 Megabases and a BUSCO completion score of 84.0%, which is comparable to several finished model organism reference assemblies. We used BioNano Genomics’ Irys platform to generate 336 scaffolds from this data with a scaffold N50 of 24 megabases and total genome coverage of 98%. Lachesis interaction maps were used with a clustering algorithm to associate Irys scaffolds into the expected 30 chromosome physical maps. Comparisons of the initial hybrid scaffolds generated from the long read contigs and optical map information to a previously generated RH map revealed that the entirety of the Goat autosome 20 physical map was contained within one scaffold. Additionally, the BioNano scaffolding resolved several difficult regions that contained genes related to innate immunity which were problem regions in previous reference genome assemblies.

Read more
June 1, 2021  |  

Progress Toward a Low Budget Reference Grade Genome Assembly

Reference quality de novo genome assemblies were once solely the domain of large, well-funded genome projects. While next-generation short read technology removed some of the cost barriers, accurate chromosome-scale assembly remains a real challenge. Here we present efforts to de novo assemble the goat (Capra hircus) genome. Through the combination of single-molecule technologies from Pacific Biosciences (sequencing) and BioNano Genomics (optical mapping) coupled with high-throughput chromosome conformation capture sequencing (Hi-C), an inbred San Clemente goat genome has been sequenced and assembled to a high degree of completeness at a relatively modest cost. Starting with 38 million PacBio reads, we integrated the MinHash Alignment Process (MHAP) with the Celera Assembler (CA) to produce an assembly composed of 3110 contigs with a contig N50 size of 4.7 Mb. This assembly was scaffolded with BioNano genome maps derived from a single IrysChip into 333 scaffolds with an N50 of 23.1 Mb including the complete scaffolding of chromosome 20. Finally, cis-chromosome associations were determined by Hi-C, yielding complete reconstruction of all autosomes into single scaffolds with a final N50 of 91.7 Mb. We hope to demonstrate that our methods are not only cost effective, but improve our ability to annotate challenging genomic regions such as highly repetitive immune gene clusters.

Read more
June 1, 2021  |  

High-quality, highly contiguous re-assembly of the pig genome

Many applications of high throughput sequencing rely on the availability of an accurate reference genome. Errors in the reference genome assembly increase the number of false-positives in downstream analyses. Recently, we have shown that over 33% of the current pig reference genome, Sscrofa10.2, is either misassembled or otherwise unreliable for genomic analyses. Additionally, ~10% of the bases in the assembly are Ns in gaps of an arbitrary size. Thousands of highly fragmented contigs remain unplaced and many genes are known to be missing from the assembly. Here we present a new assembly of the pig genome, Sscrofa11, assembled using 65X PacBio sequencing from T.J. Tabasco, the same Duroc sow used in the assembly of Sscrofa10.2. The PacBio reads were assembled using the Falcon assembly pipeline resulting in 3,206 contigs with an initial contig N50 of 14.5Mb. We used Sscrofa10.2 as a template to scaffold the PacBio contigs, under the assumption that its gross structure is correct, and used PBJelly to fill gaps. Additional gaps were filled using large, sequenced BACs from the original assembly. Following gap filling, the assembly has substantially improved contiguity and contains more sequence than the Sscrofa10.2 assembly. Arrow and Pilon were used to polish the assembly. The contig N50 is now 58.5Mb with 103 gaps remaining. By comparing regions of the two assemblies we show that regions with structural abnormalities we identified in Sscrofa10.2 are resolved in the new PacBio assembly.

Read more
June 1, 2021  |  

FALCON-Phase integrates PacBio and HiC data for de novo assembly, scaffolding and phasing of a diploid Puerto Rican genome (HG00733)

Haplotype-resolved genomes are important for understanding how combinations of variants impact phenotypes. The study of disease, quantitative traits, forensics, and organ donor matching are aided by phased genomes. Phase is commonly resolved using familial data, population-based imputation, or by isolating and sequencing single haplotypes using fosmids, BACs, or haploid tissues. Because these methods can be prohibitively expensive, or samples may not be available, alternative approaches are required. de novo genome assembly with PacBio Single Molecule, Real-Time (SMRT) data produces highly contiguous, accurate assemblies. For non-inbred samples, including humans, the separate resolution of haplotypes results in higher base accuracy and more contiguous assembled sequences. Two primary methods exist for phased diploid genome assembly. The first, TrioCanu requires Illumina data from parents and PacBio data from the offspring. The long reads from the child are partitioned into maternal and paternal bins using parent-specific sequences; the separate PacBio read bins are then assembled, generating two fully phased genomes. An alternative approach (FALCON-Unzip) does not require parental information and separates PacBio reads, during genome assembly, using heterozygous SNPs. The length of haplotype phase blocks in FALCON-Unzip is limited by the magnitude and distribution of heterozygosity, the length of sequence reads, and read coverage. Because of this, FALCON-Unzip contigs typically contain haplotype-switch errors between phase blocks, resulting in primary contig of mixed parental origin. We developed FALCON-Phase, which integrates Hi-C data downstream of FALCON-Unzip to resolve phase switches along contigs. We applied the method to a human (Puerto Rican, HG00733) and non-human genome assemblies and evaluated accuracy using samples with trio data. In a cattle genome, we observe >96% accuracy in phasing when compared to TrioCanu assemblies as well as parental SNPs. For a high-quality PacBio assembly (>90-fold Sequel coverage) of a Puerto Rican individual we scaffolded the FALCON-Phase contigs, and re-phased the contigs creating a de novo scaffolded, phased diploid assembly with chromosome-scale contiguity.

Read more
June 1, 2021  |  

A low DNA input protocol for high-quality PacBio de novo genome assemblies from single invertebrate individuals

A high-quality reference genome is an essential tool for studies of plant and animal genomics. PacBio Single Molecule, Real-Time (SMRT) Sequencing generates long reads with uniform coverage and high consensus accuracy, making it a powerful technology for de novo genome assembly. PacBio is the core technology for many large genome initiatives, however, relatively high DNA input requirements (5 µg for standard library protocol) have placed PacBio out of reach for many projects on small, non-inbred organisms that may have lower DNA content. Here we present high-quality de novo genome assemblies from single invertebrate individuals for two different species: the Anopheles coluzzii mosquito and the Schistosoma mansoni parasitic flatworm. A modified SMRTbell library construction protocol without DNA shearing and size selection was used to generate a SMRTbell library from just 50-100 ng of starting genomic DNA. The libraries were run on the Sequel System with chemistry v3.0 and software v6.0, generating a range of 21-32 Gb of sequence per SMRT Cell with 20 hour movies, and followed by diploid de novo genome assembly with FALCON-Unzip. The resulting assemblies had high contiguity (contig N50s over 3 Mb for both species) and completeness (as determined by conserved BUSCO gene analysis). We were also able to resolve maternal and paternal haplotypes for 1/3 of the genome in both cases. By sequencing and assembling material from a single diploid individual, only two haplotypes are present, simplifying the assembly process compared to samples from multiple pooled individuals. This new low-input approach puts PacBio-based assemblies in reach for small, highly heterozygous organisms that comprise much of the diversity of life. The method presented here can be applied to samples with starting DNA amounts around 100 ng per 250 Mb – 1 Gb genome size.

Read more
June 1, 2021  |  

A high-quality de novo genome assembly from a single mosquito using PacBio sequencing

A high-quality reference genome is an essential tool for studies of plant and animal genomics. PacBio Single Molecule, Real-Time (SMRT) Sequencing generates long reads with uniform coverage and high consensus accuracy, making it a powerful technology for de novo genome assembly. While PacBio is the core technology for many large genome initiatives, relatively high DNA input requirements (3 µg for standard library protocol) have placed PacBio out of reach for many projects on small, non-inbred organisms that may have lower DNA content. Here we present high-quality de novo genome assemblies from single invertebrate individuals for two different species: the Anopheles coluzzii mosquito and the Schistosoma mansoni parasitic flatworm. A modified SMRTbell library construction protocol without DNA shearing and size selection was used to generate a SMRTbell library from just 150 ng of starting genomic DNA. The libraries were run on the Sequel System with chemistry v3.0 and software v6.0, generating a range of 21-32 Gb of sequence per SMRT Cell with 20-hour movies (10-12 Gb for 10-hour movies), and followed by diploid de novo genome assembly with FALCON-Unzip. The resulting assemblies had high contiguity (contig N50s over 3 Mb for both species) and completeness (as determined by conserved BUSCO gene analysis). We were also able to resolve maternal and paternal haplotypes for 1/3 of the genome in both cases. By sequencing and assembling material from a single diploid individual, only two haplotypes are present, simplifying the assembly process compared to samples from multiple pooled individuals. This new low-input approach puts PacBio-based assemblies in reach for small, highly heterozygous organisms that comprise much of the diversity of life. The method presented here can be applied to samples with starting DNA amounts around 150 ng per 250 Mb – 600 Mb genome size.

Read more
February 5, 2021  |  

PAG Conference: Dawn of the crop pangenome era

To make improvements to crops like corn, soybeans, and canola, scientists at Corteva are building a compendium of crop genomics resources to provide actionable sequence info for genetic discovery, gene-editing,…

Read more
April 21, 2020  |  

Chlorella vulgaris genome assembly and annotation reveals the molecular basis for metabolic acclimation to high light conditions.

Chlorella vulgaris is a fast-growing fresh-water microalga cultivated at the industrial scale for applications ranging from food to biofuel production. To advance our understanding of its biology and to establish genetics tools for biotechnological manipulation, we sequenced the nuclear and organelle genomes of Chlorella vulgaris 211/11P by combining next generation sequencing and optical mapping of isolated DNA molecules. This hybrid approach allowed to assemble the nuclear genome in 14 pseudo-molecules with an N50 of 2.8 Mb and 98.9% of scaffolded genome. The integration of RNA-seq data obtained at two different irradiances of growth (high light-HL versus low light -LL) enabled to identify 10,724 nuclear genes, coding for 11,082 transcripts. Moreover 121 and 48 genes were respectively found in the chloroplast and mitochondrial genome. Functional annotation and expression analysis of nuclear, chloroplast and mitochondrial genome sequences revealed peculiar features of Chlorella vulgaris. Evidence of horizontal gene transfers from chloroplast to mitochondrial genome was observed. Furthermore, comparative transcriptomic analyses of LL vs HL provide insights into the molecular basis for metabolic rearrangement in HL vs. LL conditions leading to enhanced de novo fatty acid biosynthesis and triacylglycerol accumulation. The occurrence of a cytosolic fatty acid biosynthetic pathway can be predicted and its upregulation upon HL exposure is observed, consistent with increased lipid amount under HL. These data provide a rich genetic resource for future genome editing studies, and potential targets for biotechnological manipulation of Chlorella vulgaris or other microalgae species to improve biomass and lipid productivity.This article is protected by copyright. All rights reserved.

Read more

Subscribe for blog updates:

Talk with an expert

If you have a question, need to check the status of an order, or are interested in purchasing an instrument, we're here to help.