Menu

Auto Tag: Human

July 7, 2019

Next-generation sequence analysis reveals transfer of methicillin resistance to a methicillin-susceptible Staphylococcus aureus strain that subsequently caused a methicillin-resistant Staphylococcus aureus outbreak: a descriptive study.

Resistance to methicillin in Staphylococcus aureus is caused primarily by the mecA gene, which is carried on a mobile genetic element, the staphylococcal cassette chromosome mec (SCCmec). Horizontal transfer of this element is supposed to be an important factor in the emergence of new clones of methicillin-resistant Staphylococcus aureus (MRSA) but has been rarely observed in real time. In 2012, an outbreak occurred involving a health care worker (HCW) and three patients, all carrying a fusidic acid-resistant MRSA strain. The husband of the HCW was screened for MRSA carriage, but only a methicillin-susceptible S. aureus (MSSA) strain, which was also resistant to fusidic acid, was detected. Multiple-locus variable-number tandem-repeat analysis (MLVA) typing showed that both the MSSA and MRSA isolates were MT4053-MC0005. This finding led to the hypothesis that the MSSA strain acquired the SCCmec and subsequently caused an outbreak. To support this hypothesis, next-generation sequencing of the MSSA and MRSA isolates was performed. This study showed that the MSSA isolate clustered closely with the outbreak isolates based on whole-genome multilocus sequence typing and single-nucleotide polymorphism (SNP) analysis, with a genetic distance of 17 genes and 44 SNPs, respectively. Remarkably, there were relatively large differences in the mobile genetic elements in strains within and between individuals. The limited genetic distance between the MSSA and MRSA isolates in combination with a clear epidemiologic link supports the hypothesis that the MSSA isolate acquired a SCCmec and that the resulting MRSA strain caused an outbreak. Copyright © 2017 American Society for Microbiology.

Read more
July 7, 2019

Genome Sequence of Oxalobacter formigenes Strain OXCC13.

The lack of Oxalobacter formigenes colonization in the human gut is generally acknowledged as a risk factor for kidney stone formation since this microorganism can play an important role in oxalate homeostasis. Here, we present the genome sequence of OXCC13, a human strain isolated from an individual residing in Germany. Copyright © 2017 Hatch et al.

Read more
July 7, 2019

First report of Klebsiella oxytoca strain simultaneously producing NDM-1, IMP-4 and KPC-2 carbapenemases.

The nucleotide sequences of five plasmids from one Klebsiella oxytoca isolate were determined using the PacBio RS II system. Plasmid analysis revealed that blaNDM-1 was carried on an IncX3 plasmid. The blaIMP-4 and blaKPC-2 genes were located on IncN and IncP-6 plasmids, respectively. Comparative sequence analysis highlighted the successful spread of carbapenemase-harboring plasmids among different enterobacterial species. We report for the first time, to our knowledge, coproducing NDM-1, KPC-2, and IMP-4 carbapenemases on a K. oxytoca isolate. Copyright © 2017 American Society for Microbiology.

Read more
July 7, 2019

Complete genome sequence of Staphylococcus lutrae ATCC 700373, a potential pathogen isolated from deceased otters.

Despite their relevance to human health, not all staphylococcal species have been characterized. As such, the potential zoonotic threats posed by uninvestigated species and their contribution to the staphylococcal pangenome are unclear. Here, we report the complete genome sequence of Staphylococcus lutrae ATCC 700373, a coagulase-positive species isolated from deceased otters. Copyright © 2017 Veseli et al.

Read more
July 7, 2019

Rapid and consistent evolution of colistin resistance in XDR Pseudomonas aeruginosa during morbidostat culture.

Colistin is a last resort antibiotic commonly used against multidrug-resistant strains of Pseudomonas aeruginosa To investigate the potential for in-situ evolution of resistance against colistin and to map the molecular targets of colistin resistance, we exposed two P. aeruginosa isolates to colistin using a continuous culture device known as morbidostat. As a result, colistin resistance reproducibly increased 10-fold within ten days, and 100-fold within 20 days, along with highly stereotypic, yet strain specific mutation patterns. The majority of mutations hit the pmrAB two component signaling system and genes involved in lipopolysaccharide (LPS) synthesis, including lpxC, pmrE, and migA We tracked the frequencies of all arising mutations by whole genome deep sequencing every 3-4 days to provide a detailed picture of the dynamics of resistance evolution, including competition and displacement among multiple resistant sub-populations. In seven out of 18 cultures, we observed mutations in mutS along with a mutator phenotype that seemed to facilitate resistance evolution. Copyright © 2017 American Society for Microbiology.

Read more
July 7, 2019

Identification of three homologous latex-clearing protein (lcp) genes from the genome of Streptomyces sp. strain CFMR 7.

Rubber materials have greatly contributed to human civilization. However, being a polymeric material does not decompose easily, it has caused huge environmental problems. On the other hand, only few bacteria are known to degrade rubber, with studies pertaining them being intensively focusing on the mechanism involved in microbial rubber degradation. The Streptomyces sp. strain CFMR 7, which was previously confirmed to possess rubber-degrading ability, was subjected to whole genome sequencing using the single molecule sequencing technology of the PacBio® RS II system. The genome was further analyzed and compared with previously reported rubber-degrading bacteria in order to identify the potential genes involved in rubber degradation. This led to the interesting discovery of three homologues of latex-clearing protein (Lcp) on the chromosome of this strain, which are probably responsible for rubber degrading activities. Genes encoding oxidoreductase a-subunit (oxiA) and oxidoreductase ß-subunit (oxiB) were also found downstream of two lcp genes which are located adjacent to each other. In silico analysis reveals genes that have been identified to be involved in the microbial degradation of rubber in the Streptomyces sp. strain CFMR 7. This is the first whole genome sequence of a clear-zone-forming natural rubber- degrading Streptomyces sp., which harbours three Lcp homologous genes with the presence of oxiA and oxiB genes compared to the previously reported Gordonia polyisoprenivorans strain VH2 (with two Lcp homologous genes) and Nocardia nova SH22a (with only one Lcp gene). Copyright © 2017. Published by Elsevier B.V.

Read more
July 7, 2019

Comparative genomic and phylogenetic analysis of a toxigenic clinical isolate of Corynebacterium diphtheriae strain B-D-16-78 from Malaysia.

In this study, we report the comparative genomics and phylogenetic analysis of Corynebacterium diphtheriae strain B-D-16-78 that was isolated from a clinical specimen in 2016. The complete genome of C. diphtheriae strain B-D-16-78 was sequenced using PacBio Single Molecule, Real-Time sequencing technology and consists of a 2,474,151-bp circular chromosome with an average GC content of 53.56%. The core genome of C. diphtheriae was also deduced from a total of 74 strains with complete or draft genome sequences and the core genome-based phylogenetic analysis revealed close genetic relationship among strains that shared the same MLST allelic profile. In the context of CRISPR-Cas system, which confers adaptive immunity against re-invading DNA, 73 out of 86 spacer sequences were found to be unique to Malaysian strains which harboured only type-II-C and/or type-I-E-a systems. A total of 48 tox genes which code for the diphtheria toxin were retrieved from the 74 genomes and with the exception of one truncated gene, only nucleotide substitutions were detected when compared to the tox gene sequence of PW8. More than half were synonymous substitution and only two were nonsynonymous substitutions whereby H24Y was predicted to have a damaging effect on the protein function whilst T262V was predicted to be tolerated. Both toxigenic and non-toxigenic toxin-gene bearing strains have been isolated in Malaysia but the repeated isolation of toxigenic strains with the same MLST profile suggests the possibility of some of these strains may be circulating in the population. Hence, efforts to increase herd immunity should be continued and supported by an effective monitoring and surveillance system to track, manage and control outbreak of cases. Copyright © 2017 Elsevier B.V. All rights reserved.

Read more
July 7, 2019

Recombination-dependent replication and gene conversion homogenize repeat sequences and diversify plastid genome structure

There is a misinterpretation in the literature regarding the variable orientation of the small single copy region of plastid genomes (plastomes). The common phenomenon of small and large single copy inversion, hypothesized to occur through intramolecular recombination between inverted repeats (IR) in a circular, single unit-genome, in fact, more likely occurs through recombination-dependent replication (RDR) of linear plastome templates. If RDR can be primed through both intra- and intermolecular recombination, then this mechanism could not only create inversion isomers of so-called single copy regions, but also an array of alternative sequence arrangements.We used Illumina paired-end and PacBio single-molecule real-time (SMRT) sequences to characterize repeat structure in the plastome of Monsonia emarginata (Geraniaceae). We used OrgConv and inspected nucleotide alignments to infer ancestral nucleotides and identify gene conversion among repeats and mapped long (>1 kb) SMRT reads against the unit-genome assembly to identify alternative sequence arrangements.Although M. emarginata lacks the canonical IR, we found that large repeats (>1 kilobase; kb) represent ~22% of the plastome nucleotide content. Among the largest repeats (>2 kb), we identified GC-biased gene conversion and mapping filtered, long SMRT reads to the M. emarginata unit-genome assembly revealed alternative, substoichiometric sequence arrangements.We offer a model based on RDR and gene conversion between long repeated sequences in the M. emarginata plastome and provide support that both intra-and intermolecular recombination between large repeats, particularly in repeat-rich plastomes, varies unit-genome structure while homogenizing the nucleotide sequence of repeats.© 2017 Botanical Society of America.

Read more
July 7, 2019

Genomic insights into the virulence and salt tolerance of Staphylococcus equorum.

To shed light on the genetic background behind the virulence and salt tolerance of Staphylococcus equorum, we performed comparative genome analysis of six S. equorum strains. Data on four previously published genome sequences were obtained from the NCBI database, while those on strain KM1031 displaying resistance to multiple antibiotics and strain C2014 causing haemolysis were determined in this study. Examination of the pan-genome of five of the six S. equorum strains showed that the conserved core genome retained the genes for general physiological processes and survival of the species. In this comparative genomic analysis, the factors that distinguish the strains from each other, including acquired genomic factors in mobile elements, were identified. Additionally, the high salt tolerance of strains enabling growth at a NaCl concentration of 25% (w/v) was attributed to the genes encoding potassium voltage-gated channels. Among the six strains, KS1039 does not possess any of the functional virulence determinants expressed in the other strains.

Read more
July 7, 2019

Whole genome sequence of the heterozygous clinical isolate Candida krusei 81-B-5.

Candida krusei is a diploid, heterozygous yeast that is an opportunistic fungal pathogen in immunocompromised patients. This species also is utilized for fermenting cocoa beans during chocolate production. One major concern in the clinical setting is the innate resistance of this species to the most commonly used antifungal drug fluconazole. Here we report a high-quality genome sequence and assembly for the first clinical isolate of C. krusei, strain 81-B-5, into 11 scaffolds generated with PacBio sequencing technology. Gene annotation and comparative analysis revealed a unique profile of transporters that could play a role in drug resistance or adaptation to different environments. In addition, we show that while 82% of the genome is highly heterozygous, a 2.0 Mb region of the largest scaffold has undergone loss of heterozygosity. This genome will serve as a reference for further genetic studies of this pathogen. Copyright © 2017 Author et al.

Read more
July 7, 2019

ConcatSeq: A method for increasing throughput of single molecule sequencing by concatenating short DNA fragments.

Single molecule sequencing (SMS) platforms enable base sequences to be read directly from individual strands of DNA in real-time. Though capable of long read lengths, SMS platforms currently suffer from low throughput compared to competing short-read sequencing technologies. Here, we present a novel strategy for sequencing library preparation, dubbed ConcatSeq, which increases the throughput of SMS platforms by generating long concatenated templates from pools of short DNA molecules. We demonstrate adaptation of this technique to two target enrichment workflows, commonly used for oncology applications, and feasibility using PacBio single molecule real-time (SMRT) technology. Our approach is capable of increasing the sequencing throughput of the PacBio RSII platform by more than five-fold, while maintaining the ability to correctly call allele frequencies of known single nucleotide variants. ConcatSeq provides a versatile new sample preparation tool for long-read sequencing technologies.

Read more
July 7, 2019

Plasmid composition in Aeromonas salmonicida subsp. salmonicida 01-B526 unravels unsuspected type three secretion system loss patterns.

Aeromonas salmonicida subsp. salmonicida is a ubiquitous psychrophilic waterborne bacterium and a fish pathogen. The numerous mobile elements, especially insertion sequences (IS), in its genome promote rearrangements that impact its phenotype. One of the main virulence factors of this bacterium, its type three secretion system (TTSS), is affected by these rearrangements. In Aeromonas salmonicida subsp. salmonicida most of the TTSS genes are encoded in a single locus on a large plasmid called pAsa5, and may be lost when the bacterium is cultivated at a higher temperature (25 °C), producing non-virulent mutants. In a previous study, pAsa5-rearranged strains that lacked the TTSS locus on pAsa5 were produced using parental strains, including 01-B526. Some of the generated deletions were explained by homologous recombination between ISs found on pAsa5, whereas the others remained unresolved. To investigate those rearrangements, short- and long-read high-throughput sequencing technologies were used on the A. salmonicida subsp. salmonicida 01-B526 whole genome.Whole genome sequencing of the 01-B526 strain revealed that its pAsa5 has an additional IS copy, an ISAS5, compared to the reference strain (A449) sequence, which allowed for a previously unknown rearrangement to occur. It also appeared that 01-B526 bears a second large plasmid, named pAsa9, which shares 40 kbp of highly similar sequences with pAsa5. Following these discoveries, previously unexplained deletions were elucidated by genotyping. Furthermore, in one of the derived strains a fusion of pAsa5 and pAsa9, involving the newly discovered ISAS5 copy, was observed.The loss of TTSS and hence virulence is explained by one consistent mechanism: IS-driven homologous recombination. The similarities between pAsa9 and pAsa5 also provide another example of genetic diversity driven by ISs.

Read more
July 7, 2019

Discovery and genotyping of novel sequence insertions in many sequenced individuals

Motivation: Despite recent advances in algorithms design to characterize structural variation using high-throughput short read sequencing (HTS) data, characterization of novel sequence insertions longer than the average read length remains a challenging task. This is mainly due to both computational difficulties and the complexities imposed by genomic repeats in generating reliable assemblies to accurately detect both the sequence content and the exact location of such insertions. Additionally, de novo genome assembly algorithms typically require a very high depth of coverage, which may be a limiting factor for most genome studies. Therefore, characterization of novel sequence insertions is not a routine part of most sequencing projects. There are only a handful of algorithms that are specifically developed for novel sequence insertion discovery that can bypass the need for the whole genome de novo assembly. Still, most such algorithms rely on high depth of coverage, and to our knowledge there is only one method (PopIns) that can use multi-sample data to “collectively” obtain a very high coverage dataset to accurately find insertions common in a given population. Result: Here, we present Pamir, a new algorithm to efficiently and accurately discover and genotype novel sequence insertions using either single or multiple genome sequencing datasets. Pamir is able to detect breakpoint locations of the insertions and calculate their zygosity (i.e. heterozygous versus homozygous) by analyzing multiple sequence signatures, matching one-end-anchored sequences to small-scale de novo assemblies of unmapped reads, and conducting strand-aware local assembly. We test the efficacy of Pamir on both simulated and real data, and demonstrate its potential use in accurate and routine identification of novel sequence insertions in genome projects. Availability and implementation: Pamir is available at https://github.com/vpc-ccg/pamir. Contact:fhach@sfu.ca, prostatecentre.com or calkan@cs.bilkent.edu.tr Supplementary information:Supplementary data are available at Bioinformatics online.

Read more

Subscribe for blog updates:

Talk with an expert

If you have a question, need to check the status of an order, or are interested in purchasing an instrument, we're here to help.