Menu

Auto Tag: contig

June 1, 2021  |  

Comparative Studies of Mammalian Sex Chromosomes: From Cytogenetics to NGS

It is a common knowledge that sex chromosome mutations are better tolerated and more viable compared to changes in autosomes. This is explained by relatively low gene density in both the X and the Y chromosome and by random X chromosome inactivation in mammalian females buffering the effect of X-aneuploidies. However, it is not well understood why apparently similar sex chromosome abnormalities, such as X-monosomy or certain Y chromosome rearrangements, result in different phenotypic effects in different species. It is thought that this is due to species differences in the organization of the Y chromosome, differences in the set of genes escaping X-inactivation, and the presence of species/lineage specific sex-linked genes with functions in development and reproduction. Current knowledge about the species differences in sex chromosome organization and function is limited, this despite the availability of reference genome assemblies for most domestic species. It appears that sequence assembly of the X chromosome in most species is rather patchy containing multiple gaps and possible misassemblies, being the poorest in the pseudoautosomal region and in regions containing putative lineage-specific sequences. The Y chromosome, on the other hand, is typically not included in the reference genome and is studied separately, whereas complete sequence assembly of the male-specific portion of the Y is not yet available for any domestic species. In this talk I will discuss comparative organization and function of animal sex chromosomes and related phenotypes proceeding from our research in horses.

Read more
June 1, 2021  |  

MaSuRCA Mega-Reads Assembly Technique for haplotype resolved genome assembly of hybrid PacBio and Illumina Data

The developments in DNA sequencing technology over the past several years have enabled large number of scientists to obtain sequences for the genomes of their interest at a fairly low cost. Illumina Sequencing was the dominant whole genome sequencing technology over the past few years due to its low cost. The Illumina reads are short (up to 300bp) and thus most of those draft genomes produced from Illumina data are very fragmented which limits their usability in practical scenarios. Longer reads are needed for more contiguous genomes. Recently Pacbio sequencing made significant advances in developing cost-effective long-read (>10000bp) sequencing technology and their data, although several times more expensive than Illumina, can be used to produce high quality genomes. Pacbio data can be used for de novo assembly, however due to its high error rate high coverage of the genome is required this raising the cost barrier. A solution for cost-effective genomes is to combine Pacbio and Illumina data leveraging the low error rates of the short Illumina reads and the length of the Pacbio reads. We have developed MaSuRCA mega-reads assembler for efficient assembly of hybrid data sets and we demonstrate that it performs well compared to the other published hybrid techniques. Another important benefit of the long reads is their ability to link the haplotype differences. The mega-reads approach corrects each Pacbio read independently and thus haplotype differences are preserved. Thus, leveraging the accuracy of the Illumina data and the length of the Pacbio reads, MaSuRCA mega-reads can produce haplotype-resolved genome assemblies, where each contig has sequence from a single haplotype. We present preliminary results on haplotype-resolved genome assemblies of faux (proof-of-concept) and real data.

Read more
June 1, 2021  |  

Diploid genome assembly and comprehensive haplotype sequence reconstruction

Outside of the simplest cases (haploid, bacteria, or inbreds), genomic information is not carried in a single reference per individual, but rather has higher ploidy (n=>2) for almost all organisms. The existence of two or more highly related sequences within an individual makes it extremely difficult to build high quality, highly contiguous genome assemblies from short DNA fragments. Based on the earlier work on a polyploidy aware assembler, FALCON ( https://github.com/PacificBiosciences/FALCON) , we developed new algorithms and software (“FALCON-unzip”) for de novo haplotype reconstructions from SMRT Sequencing data. We generate two datasets for developing the algorithms and the prototype software: (1) whole genome sequencing data from a highly repetitive diploid fungal (Clavicorona pyxidata) and (2) whole genome sequencing data from an F1 hybrid from two inbred Arabidopsis strains: Cvi-0 and Col-0. For the fungal genome, we achieved an N50 of 1.53 Mb (of the 1n assembly contigs) of the ~42 Mb 1n genome and an N50 of the haplotigs (haplotype specific contigs) of 872 kb from a 95X read length N50 ~16 kb dataset. We found that ~ 45% of the genome was highly heterozygous and ~55% of the genome was highly homozygous. We developed methods to assess the base-level accuracy and local haplotype phasing accuracy of the assembly with short-read data from the Illumina® platform. For the ArabidopsisF1 hybrid genome, we found that 80% of the genome could be separated into haplotigs. The long range accuracy of phasing haplotigs was evaluated by comparing them to the assemblies from the two inbred parental lines. We show that a more complete view of all haplotypes could provide useful biological insights through improved annotation, characterization of heterozygous variants of all sizes, and resolution of differential allele expression. The current Falcon-Unzip method will lead to understand how to solve more difficult polyploid genome assembly problems and improve the computational efficiency for large genome assemblies. Based on this work, we can develop a pipeline enabling routinely assemble diploid or polyploid genomes as haplotigs, representing a comprehensive view of the genomes that can be studied with the information at hand.

Read more
June 1, 2021  |  

Un-zipping diploid genomes – revealing all kinds of heterozygous variants from comprehensive hapltotig assemblies

Outside of the simplest cases (haploid, bacteria, or inbreds), genomic information is not carried in a single reference per individual, but rather has higher ploidy (n=>2) for almost all organisms. The existence of two or more highly related sequences within an individual makes it extremely difficult to build high quality, highly contiguous genome assemblies from short DNA fragments. Based on the earlier work on a polyploidy aware assembler, FALCON (https://github.com/PacificBiosciences/FALCON), we developed new algorithms and software (FALCON-unzip) for de novo haplotype reconstructions from SMRT Sequencing data. We apply the algorithms and the prototype software for (1) a highly repetitive diploid fungal genome (Clavicorona pyxidata) and (2) an F1 hybrid from two inbred Arabidopsis strains: CVI-0 and COL-0. For the fungal genome, we achieved an N50 of 1.53 Mb (of the 1n assembly contigs) of the ~42 Mb 1n genome and an N50 of the haplotigs of 872 kb from a 95X read length N50 ~16 kb dataset. We found that ~ 45% of the genome was highly heterozygous and ~55% of the genome was highly homozygous. We developed methods to assess the base-level accuracy and local haplotype phasing accuracy of the assembly with short-read data from the Illumina platform. For the Arabidopsis F1 hybrid genome, we found that 80% of the genome could be separated into haplotigs. The long range accuracy of phasing haplotigs was evaluated by comparing them to the assemblies from the two inbred parental lines. We show that a more complete view of all haplotypes could provide useful biological insights through improved annotation, characterization of heterozygous variants of all sizes, and resolution of differential allele expression. Finally, we applied this method to WGS human data sets to demonstrate the potential for resolving complicated, medically-relevant genomic regions.

Read more
June 1, 2021  |  

Long-read assembly of the Aedes aegypti Aag2 cell line genome resolves ancient endogenous viral elements

Transmission of arboviruses such as Dengue and Zika viruses by Aedes aegypti causes widespread and debilitating disease across the globe. Disease in humans can include severe acute symptoms such as hemorrhagic fever, organ failure, and encephalitis; and yet, mosquitoes tolerate high titers of virus in a persistent infection. The mechanisms responsible for tolerance to viral infection in mosquitoes are still unclear. Recent publications have highlighted the integration of genetic material from non-retroviral RNA viruses into the genome of the host during infection that relies upon endogenous retro-transcriptase activity from transposons. These endogenous viral elements (EVEs) found in the genome are predicted to be ancient and at least some EVEs are under purifying selection, which suggests that they are beneficial to the host. In order characterize EVE biogenesis in a tractable system we sequenced the Ae. aegypti cell line, Aag2, to 58X coverage and here present a de novo assembly of the genome. The assembly consists of 1.7 Gb of genomic and 255 Mb of alternative haplotype specific sequence, made up of contigs with a N50 of 1.4 Mb; a value that, when compared with other assemblies of the Aedes genus, is from 1-3 orders of magnitude longer. The Aag2 genome is highly repetitive (70%), most of which is classified as transposable elements (60%). We identify a plethora of EVEs in the genome homologous to a diverse range of extant viruses, many of which cluster in these regions of highly repetitive DNA. The highly contiguous nature of this assembly allows for a more comprehensive identification of the transposable elements and EVEs that are most likely to be lost in assemblies lacking the read length of SMRT Sequencing. Transmission of arboviruses such as Dengue Virus by Aedes aegypti causes widespread and debilitating disease across the globe. Disease in humans can include severe acute symptoms such as hemorrhagic fever, organ failure, and encephalitis; and yet, mosquitoes tolerate high titers of virus in a persistent infection. The mechanisms responsible for tolerance to viral infection in mosquitoes are still unclear. Recent publications have highlighted the integration of genetic material from non-retroviral RNA viruses into the genome of the host during infection that relies upon endogenous retro-transcriptase activity from transposons. These endogenous viral elements (EVEs) found in the genome are predicted to be ancient and at least some EVEs are under purifying selection, which suggests that they are beneficial to the host. In order characterize EVE biogenesis in a tractable system we sequenced the Ae. aegypti cell line, Aag2, to 58X coverage and here present a de novo assembly of the genome. The assembly consists of 1.7 Gb of genomic and 255 Mb of alternative haplotype specific sequence, made up of contigs with a N50 of 1.4 Mb; a value that, when compared with other assemblies of the Aedes genus, is from 1-3 orders of magnitude longer. The Aag2 genome is highly repetitive (70%), most of which is classified as transposable elements (60%). We identify a plethora of EVEs in the genome homologous to a diverse range of extant viruses, many of which cluster in these regions of highly repetitive DNA. The highly contiguous nature of this assembly allows for a more comprehensive identification of the transposable elements and EVEs that are most likely to be lost in assemblies lacking the read length of SMRT Sequencing. Transmission of arboviruses such as Dengue Virus by Aedes aegypti causes widespread and debilitating disease across the globe. Disease in humans can include severe acute symptoms such as hemorrhagic fever, organ failure, and encephalitis; and yet, mosquitoes tolerate high titers of virus in a persistent infection. The mechanisms responsible for tolerance to viral infection in mosquitoes are still unclear.

Read more
June 1, 2021  |  

Application specific barcoding strategies for SMRT Sequencing

Over the last few years, several advances were implemented in the PacBio RS II System to maximize throughput and efficiency while reducing the cost per sample. The number of useable bases per SMRT Cell now exceeds 1 Gb with the latest P6-C4 chemistry and 6-hour movies. For applications such as microbial sequencing, targeted sequencing, Iso-Seq (full-length isoform sequencing) and Nimblegen’s target enrichment method, current SMRT Cell yields could be an excess relative to project requirements. To this end, barcoding is a viable option for multiplexing samples. For microbial sequencing, multiplexing can be accomplished by tagging sheared genomic DNA during library construction with modified SMRTbell adapters. We studied the performance of 2- to 8-plex microbial sequencing. For full-length amplicon sequencing such as HLA typing, amplicons as large as 5 kb may be barcoded during amplification using barcoded locus-specific primers. Alternatively, amplicons may be barcoded during SMRTbell library construction using barcoded SMRTbell adapters. The preferred barcoding strategy depends on the user’s existing workflow and flexibility to changing and/or updating existing workflows. Using barcoded adapters, five Class I and II genes (3.3 – 5.8 kb) x 96 patients can be multiplexed and typed. For Iso-Seq full-length cDNA sequencing, barcodes are incorporated during 1st-strand synthesis and are enabled by tailing the oligo-dT primer with any PacBio published 16-bp barcode sequences. RNA samples from 6 maize tissues were multiplexed to generate barcoded cDNA libraries. The NimbleGen SeqCap Target Enrichment method, combined with PacBio’s long-read sequencing, provides comprehensive view of multi-kilobase contiguous regions, both exonic and intronic regions. To make this cost effective, we recommend barcoding samples for pooling prior to target enrichment and capture. Here, we present specific examples of strategies and best practices for multiplexing samples for different applications for SMRT Sequencing. Additionally, we describe recommendations for analyzing barcoded samples.

Read more
June 1, 2021  |  

Immune regions are no longer incomprehensible with SMRT Sequencing

The complex immune regions of the genome, including MHC and KIR, contain large copy number variants (CNVs), a high density of genes, hyper-polymorphic gene alleles, and conserved extended haplotypes (CEH) with enormous linkage disequilibrium (LDs). This level of complexity and inherent biases of short-read sequencing make it challenging for extracting immune region haplotype information from reference-reliant, shotgun sequencing and GWAS methods. As NGS based genome and exome sequencing and SNP arrays have become a routine for population studies, numerous efforts are being made for developing software to extract and or impute the immune gene information from these datasets. Despite these efforts, the fine mapping of causal variants of immune genes for their well-documented association with cancer, drug-induced hypersensitivity and immune-related diseases, has been slower than expected. This has in many ways limited our understanding of the mechanisms leading to immune disease. In the present work, we demonstrate the advantages of long reads delivered by SMRT Sequencing for assembling complete haplotypes of MHC and KIR gene clusters, as well as calling correct genotypes of genes comprised within them. All the genotype information is detected at allele- level with full phasing information across SNP-poor regions. Genotypes were called correctly from targeted gene amplicons, haplotypes, as well as from a completely assembled 5 Mb contig of the MHC region from a de novo assembly of whole genome shotgun data. De novo analysis pipeline used in all these approaches allowed for reference-free analysis without imputation, a key for interrogation without prior knowledge about ethnic backgrounds. These methods are thus easily adoptable for previously uncharacterized human or non-human species.

Read more
June 1, 2021  |  

Reconstruction of the spinach coding genome using full-length transcriptome without a reference genome

For highly complex and large genomes, a well-annotated genome may be computationally challenging and costly, yet the study of alternative splicing events and gene annotations usually rely on the existence of a genome. Long-read sequencing technology provides new opportunities to sequence full-length cDNAs, avoiding computational challenges that short read transcript assembly brings. The use of single molecule, real-time sequencing from PacBio to sequence transcriptomes (the Iso-Seq method), which produces de novo, high-quality, full-length transcripts, has revealed an astonishing amount of alternative splicing in eukaryotic species. With the Iso-Seq method, it is now possible to reconstruct the transcribed regions of the genome using just the transcripts themselves. We present Cogent, a tool for finding gene families and reconstructing the coding genome in the absence of a high-quality reference genome. Cogent uses k-mer similarities to first partition the transcripts into different gene families. Then, for each gene family, the transcripts are used to build a splice graph. Cogent identifies bubbles resulting from sequencing errors, minor variants, and exon skipping events, and attempts to resolve each splice graph down to the minimal set of reconstructed contigs. We apply Cogent to the Iso-Seq data for spinach, Spinacia oleracea, for which there is also a PacBio-based draft genome to validate the reconstruction. The Iso-Seq dataset consists of 68,263 fulllength, Quiver-polished transcript sequences ranging from 528 bp to 6 kbp long (mean: 2.1 kbp). Using the genome mapping as ground truth, we found that 95% (8045/8446) of the Cogent gene families found corresponded to a single genomic loci. For families that contained multiple loci, they were often homologous genes that would be categorized as belonging to the same gene family. Coding genome reconstruction was then performed individually for each gene family. A total of 86% (7283/8446) of the gene families were resolved to a single contig by Cogent, and was validated to be also a single contig in the genome. In 59 cases, Cogent reconstructed a single contig, however the contig corresponded to 2 or more loci in the genome, suggesting possible scaffolding opportunities. In 24 cases, the transcripts had no hits to the genome, though Pfam and BLAST searches of the transcripts show that they were indeed coding, suggesting that the genome is missing certain coding portions. Given the high quality of the spinach genome, we were not surprised to find that Cogent only minorly improved the genome space. However the ability of Cogent to accurately identify gene families and reconstruct the coding genome in a de novo fashion shows that it will be extremely powerful when applied to datasets for which there is no or low-quality reference genome.

Read more
June 1, 2021  |  

Multiplexing strategies for microbial whole genome SMRT Sequencing

The increased throughput of the RS II and Sequel Systems enables multiple microbes to be sequenced on a single SMRT Cell. This multiplexing can be readily achieved by simply incorporating a unique barcode for each microbe into the SMRTbell adapters after shearing genomic DNA using a streamlined library construction process. Incorporating a barcode without the requirement for PCR amplification prevents the loss of epigenetic information (e.g., methylation signatures), and the generation of chimeric sequences, while the modified protocol eliminates the need to build several individual SMRTbell libraries. We multiplexed up to 8 unique strains of H. pylori. Each strain was sheared, and processed through adapter ligation in a single, addition only reaction. The barcoded strains were then pooled in equimolar quantities, and processed through the remainder of the library preparation and purification steps. We demonstrate successful de novo microbial assembly and epigenetic analysis from all multiplexes (2 through 8-plex) using standard tools within SMRT Link Analysis using data generated from a single SMRTbell library, run on a single SMRT Cell. This process facilitates the sequencing of multiple microbial genomes in a single day, greatly increasing throughput and reducing costs per genome assembly.

Read more
June 1, 2021  |  

Resolving KIR genotypes and haplotypes simultaneously using Single Molecule, Real-Time Sequencing

The killer immunoglobulin-like receptors (KIR) genes belong to the immunoglobulin superfamily and are widely studied due to the critical role they play in coordinating the innate immune response to infection and disease. Highly accurate, contiguous, long reads, like those generated by SMRT Sequencing, when combined with target-enrichment protocols, provide a straightforward strategy for generating complete de novo assembled KIR haplotypes. We have explored two different methods to capture the KIR region; one applying the use of fosmid clones and one using Nimblegen capture.

Read more
June 1, 2021  |  

Application-specific barcoding strategies for SMRT Sequencing

The increased sequencing throughput creates a need for multiplexing for several applications. We are here detailing different barcoding strategies for microbial sequencing, targeted sequencing, Iso-Seq full-length isoform sequencing, and Roche NimbleGen’s target enrichment method.

Read more
June 1, 2021  |  

Highly contiguous de novo human genome assembly and long-range haplotype phasing using SMRT Sequencing

The long reads, random error, and unbiased sampling of SMRT Sequencing enables high quality, de novo assembly of the human genome. PacBio long reads are capable of resolving genomic variations at all size scales, including SNPs, insertions, deletions, inversions, translocations, and repeat expansions, all of which are both important in understanding the genetic basis for human disease, and difficult to access via other technologies. In demonstration of this, we report a new high-quality, diploid-aware de novo assembly of Craig Venter’s well-studied genome.

Read more
June 1, 2021  |  

Multiplexing strategies for microbial whole genome SMRT Sequencing

As the throughput of the PacBio Systems continues to increase, so has the desire to fully utilize SMRT Cell sequencing capacity to multiplex microbes for whole genome sequencing. Multiplexing is readily achieved by incorporating a unique barcode for each microbe into the SMRTbell adapters and using a streamlined library preparation process. Incorporating barcodes without PCR amplification prevents the loss of epigenetic information and the generation of chimeric sequences, while eliminating the need to generate separate SMRTbell libraries. We multiplexed the genomes of up to 8 unique strains of H. pylori. Each genome was sheared and processed through adapter ligation in a single, addition-only reaction. The barcoded samples were pooled in equimolar quantities and a single SMRTbell library was prepared. We demonstrate successful de novo microbial assembly from all multiplexes tested (2- through 8-plex) using data generated from a single SMRTbell library, run on a single SMRT Cell with the PacBio RS II, and analyzed with standard SMRT Analysis assembly methods. This strategy was successful using both small (1.6 Mb, H. pylori) and medium (5 Mb, E. coli) genomes. This protocol facilitates the sequencing of multiple microbial genomes in a single run, greatly increasing throughput and reducing costs per genome.

Read more
June 1, 2021  |  

Complete telomere-to-telomere de novo assembly of the Plasmodium falciparum genome using long-read sequencing

Sequence-based estimation of genetic diversity of Plasmodium falciparum, the most lethal malarial parasite, has proved challenging due to a lack of a complete genomic assembly. The skewed AT-richness (~80.6% (A+T)) of its genome and the lack of technology to assemble highly polymorphic sub-telomeric regions that contain clonally variant, multigene virulence families (i.e. var and rifin) have confounded attempts using short-read NGS technologies. Using single molecule, real-time (SMRT) sequencing, we successfully compiled all 14 nuclear chromosomes of the P. falciparum genome from telomere-to-telomere in single contigs. Specifically, amplification-free sequencing generated reads of average length 12 kb, with =50% of the reads between 15.5 and 50 kb in length. A hierarchical genome assembly process (HGAP), was used to assemble the P. falciparum genome de novo. This assembly accurately resolved centromeres (~90-99% (A+T)) and sub-telomeric regions, and identified large insertions and duplications in the genome that added extra genes to the var and rifin virulence families, along with smaller structural variants such as homopolymer tract expansions. These regions can be used as markers for genetic diversity during comparative genome analyses. Moreover, identifying the polymorphic and repetitive sub-telomeric sequences of parasite populations from endemic areas might inform the link between structural variation and phenotypes such as virulence, drug resistance and disease transmission.

Read more
June 1, 2021  |  

Phased human genome assemblies with Single Molecule, Real-Time Sequencing

In recent years, human genomic research has focused on comparing short-read data sets to a single human reference genome. However, it is becoming increasingly clear that significant structural variations present in individual human genomes are missed or ignored by this approach. Additionally, remapping short-read data limits the phasing of variation among individual chromosomes. This reduces the newly sequenced genome to a table of single nucleotide polymorphisms (SNPs) with little to no information as to the co-linearity (phasing) of these variants, resulting in a “mosaic” reference representing neither of the parental chromosomes. The variation between the homologous chromosomes is lost in this representation, including allelic variations, structural variations, or even genes present in only one chromosome, leading to lost information regarding allelic-specific gene expression and function. To address these limitations, we have made significant progress integrating haplotype information directly into genome assembly process with long reads. The FALCON-Unzip algorithm leverages a string graph assembly approach to facilitate identification and separation of heterozygosity during the assembly process to produce a highly contiguous assembly with phased haplotypes representing the genome in its diploid state. The outputs of the assembler are pairs of sequences (haplotigs) containing the allelic differences, including SNPs and structural variations, present in the two sets of chromosomes. The development and testing of our de-novo diploid assembler was facilitated and carefully validated using inbred reference model organisms and F1 progeny, which allowed us to ascertain the accuracy and concordance of haplotigs relative to the two inbred parental assemblies. Examination of the results confirmed that our haplotype-resolved assemblies are “Gold Level” reference genomes having a quality similar to that of Sanger-sequencing, BAC-based assembly approaches. We further sequenced and assembled two well-characterized human samples into their respective phased diploid genomes with gap-free contig N50 sizes greater than 23 Mb and haplotig N50 sizes greater than 380 kb. Results of these assemblies and a comparison between the haplotype sets are presented.

Read more

Subscribe for blog updates:

Talk with an expert

If you have a question, need to check the status of an order, or are interested in purchasing an instrument, we're here to help.