Menu
June 1, 2021

HLA sequencing using SMRT Technology – High resolution and high throughput HLA genotyping in a clinical setting

Sequence based typing (SBT) is considered the gold standard method for HLA typing. Current SBT methods are rather laborious and are prone to phase ambiguity problems and genotyping uncertainties. As a result, the NGS community is rapidly seeking to remedy these challenges, to produce high resolution and high throughput HLA sequencing conducive to a clinical setting. Today, second generation NGS technologies are limited in their ability to yield full length HLA sequences required for adequate phasing and identification of novel alleles. Here we present the use of single molecule real time (SMRT) sequencing as a means of determining full length/long HLA sequences. Moreover we reveal the scalability of this method through multiplexing approches and determine HLA genotyping calls through the use of third party Gendx NGSengine® software.


June 1, 2021

Long Amplicon Analysis: Highly accurate, full-length, phased, allele-resolved gene sequences from multiplexed SMRT Sequencing data.

The correct phasing of genetic variations is a key challenge for many applications of DNA sequencing. Allele-level resolution is strongly preferred for histocompatibility sequencing where recombined genes can exhibit different compatibilities than their parents. In other contexts, gene complementation can provide protection if deleterious mutations are found on only one allele of a gene. These problems are especially pronounced in immunological domains given the high levels of genetic diversity and recombination seen in regions like the Major Histocompatibility Complex. A new tool for analyzing Single Molecule, Real-Time (SMRT) Sequencing data – Long Amplicon Analysis (LAA) – can generate highly accurate, phased and full-length consensus sequences for multiple genes in a single sequencing run.


June 1, 2021

SMRT Sequencing solutions for plant genomes and transcriptomes

Single Molecule, Real-Time (SMRT) Sequencing provides efficient, streamlined solutions to address new frontiers in plant genomes and transcriptomes. Inherent challenges presented by highly repetitive, low-complexity regions and duplication events are directly addressed with multi- kilobase read lengths exceeding 8.5 kb on average, with many exceeding 20 kb. Differentiating between transcript isoforms that are difficult to resolve with short-read technologies is also now possible. We present solutions available for both reference genome and transcriptome research that best leverage long reads in several plant projects including algae, Arabidopsis, rice, and spinach using only the PacBio platform. Benefits for these applications are further realized with consistent use of size-selection of input sample using the BluePippin™ device from Sage Science. We will share highlights from our genome projects using the latest P5- C3 chemistry to generate high-quality reference genomes with the highest contiguity, contig N50 exceeding 1 Mb, and average base quality of QV50. Additionally, the value of long, intact reads to provide a no-assembly approach to investigate transcript isoforms using our Iso-Seq protocol will be presented for full transcriptome characterization and targeted surveys of genes with complex structures. PacBio provides the most comprehensive assembly with annotation when combining offerings for both genome and transcriptome research efforts. For more focused investigation, PacBio also offers researchers opportunities to easily investigate and survey genes with complex structures.


June 1, 2021

Data release for polymorphic genome assembly algorithm development.

Heterozygous and highly polymorphic diploid (2n) and higher polyploidy (n > 2) genomes have proven to be very difficult to assemble. One key to the successful assembly and phasing of polymorphic genomics is the very long read length (9-40 kb) provided by the PacBio RS II system. We recently released software and methods that facilitate the assembly and phasing of genomes with ploidy levels equal to or greater than 2n. In an effort to collaborate and spur on algorithm development for assembly and phasing of heterozygous polymorphic genomes, we have recently released sequencing datasets that can be used to test and develop highly polymorphic diploid and polyploidy assembly and phasing algorithms. These data sets include multiple species and ecotypes of Arabidopsis that can be combined to create synthetic in-silico F1 hybrids with varying levels of heterozygosity. Because the sequence of each individual line was generated independently, the data set provides a ‘ground truth’ answer for the expected results allowing the evaluation of assembly algorithms. The sequencing data, assembly of inbred and in-silico heterozygous samples (n=>2) and phasing statistics will be presented. The raw and processed data has been made available to aid other groups in the development of phasing and assembly algorithms.


June 1, 2021

Highly sensitive, non-invasive detection of colorectal cancer mutations using single molecule, third generation sequencing.

Colorectal cancer (CRC) represents one of the most prevalent and lethal malignant neoplasms and every individual of age 50 and above should undergo regular CRC screening. Currently, the most effective procedure to detect adenomas, the precursors to CRC, is colonoscopy, which reduces CRC incidence by 80%. However, it is an invasive approach that is unpleasant for the patient, expensive, and poses some risk of complications such as colon perforation. A non-invasive screening approach with detection rates comparable to those of colonoscopy has not yet been established. The current study applies Pacific Biosciences third generation, single molecule sequencing to the inspection of CRC-driving mutations. Our approach combines the screening power and the extremely high accuracy of circular consensus (CCS) third generation sequencing with the non-invasiveness of using stool DNA to detect CRC-associated mutations present at extremely low frequencies and establishes a foundation for a non-invasive, highly sensitive assay to screen the population for CRC and early stage adenomas. We performed a series of experiments using a pool of fifteen amplicons covering the genes most frequently mutated in CRC (APC, Beta Catenin, KRAS, BRAF, and TP53), ensuring a theoretical screening coverage of over 97% for both CRC and adenomas. The assay was able to detect mutations in DNA isolated from stool samples from patients diagnosed with CRC at frequencies below 0.5 % with no false positives. The mutations were then confirmed by sequencing DNA isolated from the excised tumor samples. Our assay should be sensitive enough to allow the early identification of adenomatous polyps using stool DNA as analyte. In conclusion, we have developed an assay to detect mutations in the genes associated with CRC and adenomas using Pacific Biosciences RS Single Molecule, Real Time Circular Consensus Sequencing (SMRT-CCS). With no systematic bias and a much higher raw base-calling quality (CCS) compared to other sequencing methods, the assay was able to detect mutations in stool DNA at frequencies below 0.5 % with no false positives. This level of sensitivity should be sufficient to allow the detection of most adenomatous polyps using stool DNA as analyte, a feature that would make our approach the first non-invasive assay with a sensitivity comparable to that of colonoscopy and a strong candidate for the non-invasive preventive CRC screening of the general population.


June 1, 2021

Unique haplotype structure determination in human genome using Single Molecule, Real-Time (SMRT) Sequencing of targeted full-length fosmids.

Determination of unique individual haplotypes is an essential first step toward understanding how identical genotypes having different phases lead to different biological interpretations of function, phenotype, and disease. Genome-wide methods for identifying individual genetic variation have been limited in their ability to acquire phased, extended, and complete genomic sequences that are long enough to assemble haplotypes with high confidence. We explore a recombineering approach for isolation and sequencing of a tiling of targeted fosmids to capture interesting regions from human genome. Each individual fosmid contains large genomic fragments (~35?kb) that are sequenced with long-read SMRT technology to generate contiguous long reads. These long reads can be easily de novo assembled for targeted haplotype resolution within an individual’s genomes. The P5-C3 chemistry for SMRT Sequencing generated contiguous, full-length fosmid sequences of 30 to 40 kb in a single read, allowing assembly of resolved haplotypes with minimal data processing. The phase preserved in fosmid clones spanned at least two heterozygous variant loci, providing the essential detail of precise haplotype structures. We show complete assembly of haplotypes for various targeted loci, including the complex haplotypes of the KIR locus (~150 to 200 kb) and conserved extended haplotypes (CEHs) of the MHC region. This method is easily applicable to other regions of the human genome, as well as other genomes.


June 1, 2021

Evaluation of multiplexing strategies for HLA genotyping using PacBio Sequencing technology.

Fully phased allele-level sequencing of highly polymorphic HLA genes is greatly facilitated by SMRT Sequencing technology. In the present work, we have evaluated multiple DNA barcoding strategies for multiplexing several loci from multiple individuals, using three different tagging methods. Specifically MHC class I genes HLA-A, -B, and –C were indexed via DNA Barcodes by either tailed primers or barcoded SMRTbell adapters. Eight different 16-bp barcode sequences were used in symmetric & asymmetric pairing. Eight DNA barcoded adapters in symmetric pairing were independently ligated to a pool of HLA-A, -B and –C for eight different individuals, one at a time and pooled for sequencing on a single SMRT Cell. Amplicons generated from barcoded primers were pooled upfront for library generation. Eight symmetric barcoded primers were generated for HLA class I genes. These primers facilitated multiplexing of 8 samples and also allowed generation of unique asymmetric pairings for simultaneous amplification from 28 reference genomic DNA samples. The data generated from all 3 methods was analyzed using LAA protocol in SMRT analysis V2.3. Consensus sequences generated were typed using GenDx NGS engine HLA-typing software.


June 1, 2021

Complex alternative splicing patterns in hematopoietic cell subpopulations revealed by third-generation long reads.

Background: Alternative splicing expands the repertoire of gene functions and is a signature for different cell populations. Here we characterize the transcriptome of human bone marrow subpopulations including progenitor cells to understand their contribution to homeostasis and pathological conditions such as atherosclerosis and tumor metastasis. To obtain full-length transcript structures, we utilized long reads in addition to RNA-seq for estimating isoform diversity and abundance. Method: Freshly harvested, viable human bone marrow tissues were extracted from discarded harvesting equipment and separated into total bone marrow (total), lineage-negative (lin-) progenitor cells and differentiated cells (lin+) by magnetic bead sorting with antibodies to surface markers of hematopoietic cell lineages. Sequencing was done with SOLiD, Illumina HiSeq (100bp paired-end reads), and PacBio RS II (full-length cDNA library protocol for 1 – 6 kb libraries). Short reads were assembled using both Trinity for de novo assembly and Cufflinks for genome-guided assembly. Full-length transcript consensus sequences were obtained for the PacBio data using the RS_IsoSeq protocol from PacBios SMRTAnalysis software. Quantitation for each sample was done independently for each sequencing platform using Sailfish to obtain the TPM (transcripts per million) using k-mer matching. Results: PacBios long read sequencing technology is capable of sequencing full-length transcripts up to 10 kb and reveals heretofore-unseen isoform diversity and complexity within the hematopoietic cell populations. A comparison of sequencing depth and de novo transcript assembly with short read, second-generation sequencing reveals that, while short reads provide precision in determining portions of isoform structure and supporting larger 5 and 3 UTR regions, it fails in providing a complete structure especially when multiple isoforms are present at the same locus. Increased breadth of isoform complexity is revealed by long reads that permits further elaboration of full isoform diversity and specific isoform abundance within each separate cell population. Sorting the distribution of major and minor isoforms reveals a cell population-specific balance focused on distinct genome loci and shows how tissue specificity and diversity are modulated by alternative splicing.


June 1, 2021

Resolving the ‘dark matter’ in genomes.

Second-generation sequencing has brought about tremendous insights into the genetic underpinnings of biology. However, there are many functionally important and medically relevant regions of genomes that are currently difficult or impossible to sequence, resulting in incomplete and fragmented views of genomes. Two main causes are (i) limitations to read DNA of extreme sequence content (GC-rich or AT-rich regions, low complexity sequence contexts) and (ii) insufficient read lengths which leave various forms of structural variation unresolved and result in mapping ambiguities.


June 1, 2021

Rapid full-length Iso-Seq cDNA sequencing of rice mRNA to facilitate annotation and identify splice-site variation.

PacBio’s new Iso-Seq technology allows for rapid generation of full-length cDNA sequences without the need for assembly steps. The technology was tested on leaf mRNA from two model O. sativa ssp. indica cultivars – Minghui 63 and Zhenshan 97. Even though each transcriptome was not exhaustively sequenced, several thousand isoforms described genes over a wide size range, most of which are not present in any currently available FL cDNA collection. In addition, the lack of an assembly requirement provides direct and immediate access to complete mRNA sequences and rapid unraveling of biological novelties.


June 1, 2021

Comparative genome analysis of Clavibacter michiganensis subsp. michiganensis strains provides insights into genetic diversity and virulence.

Clavibacter michiganensis subsp. michiganensis (Cmm) is a gram positive actinomycete, causing bacterial canker of tomato (Solanum lycopersicum) a disease that can cause significant losses in tomato production. In this study, we determined the complete genome sequence of 13 California Cmm strains and one saprophytic Clavibacter strain using a combination of Ilumina and PacBio sequencing. The California Cmm strains have genome size (3.2 -3.3 mb) similar to the reference strain NCPPB382 (3.3 mb) with =98% sequence identity. Cmm strains from California share =92% genes (8-10% are noble genes) with the reference Cmm strain NCPPB382. Despite this similarity, we detected significant alternatives in California strains with respect to plasmid number, plasmid composition, and genomic island presence indicating acquisition of unique mechanisms controlling virulence. Plasmids pCM1 and pCM2, that were previously demonstrated to be required for NCPPB382 virulence, also differ in their presence and gene content across Cmm strains. pCM2 is absent in some Cmm strains and that still retain virulence in tomato. Saprophytic Clavibacter possess a novel plasmid, pSCM, and lacks the majority of characterized virulence factors. Genome sequence information was also used to design specific and sensitive primer pairs for Cmm detection. A mechanistic understanding of how genomic changes have impacted Cmm virulence and survival across diverse strains will be necessary for developing a robust disease control strategies for bacterial canker of tomato.


June 1, 2021

A workflow for the analysis of contigs from the metagenomic shotgun assembly of SMRT Sequencing data

The throughput of SMRT Sequencing and long reads allows microbial communities to be analyzed using a shotgun sequencing approach. Key to leveraging this data is the ability to cluster sequences belonging to the same member of a community. Long reads of up to 40 kb provide a unique capability in identifying those relationships, and pave the way towards finished assemblies of community members. Long reads are highly valuable when samples are more complex and containing lower intra-species variation, such as a larger number of closely related species, or high intra-species variation. Here, we present a collection of tools tailored for the analysis of PacBio metagenomic assemblies. These tools allow for improvements in the assembly results, and greater insight into the complexity of the study communities. Supervised classification is applied to a large set of sequence characteristics (e.g. GC content, raw read coverage, k-mer frequency, and gene prediction information) and to cluster contigs from single or highly related species. Assembly in isolation of the raw data associated with these contigs is shown to improve assembly statistics. A unique feature of SMRT Sequencing is the availability to leverage simultaneously collected base modification / methylation data to aid the clustering of contigs expected to comprise a single or very closely related species. We demonstrate the added value of base modification information to distinguish and study variation within metagenomic samples based on differences in the methylated DNA motifs involved in the restriction modification system. Application of these techniques is demonstrated on a mock community and monkey intestinal microbiome sample.


June 1, 2021

Resources for advanced bioinformaticians working in plant and animal genomes with SMRT Sequencing.

Significant advances in bioinformatics tool development have been made to more efficiently leverage and deliver high-quality genome assemblies with PacBio long-read data. Current data throughput of SMRT Sequencing delivers average read lengths ranging from 10-15 kb with the longest reads exceeding 40 kb. This has resulted in consistent demonstration of a minimum 10-fold improvement in genome assemblies with contig N50 in the megabase range compared to assemblies generated using only short- read technologies. This poster highlights recent advances and resources available for advanced bioinformaticians and developers interested in the current state-of-the-art large genome solutions available as open-source code from PacBio and third-party solutions, including HGAP, MHAP, and ECTools. Resources and tools available on GitHub are reviewed, as well as datasets representing major model research organisms made publically available for community evaluation or interested developers.


June 1, 2021

Impact of DNA quality on PacBio RS II read lengths.

Maximizing the read length of next generation sequencing (NGS) facilitates de novo genome assembly. Currently, the PacBio RS II system leads the industry with respect to maximum possible NGS read lengths. Amplicon Express specializes in preparation of high molecular weight, NGS-grade genomic DNA for a variety of applications, including next generation sequencing. This study was performed to evaluate the effects of gDNA quality on PacBio RS II read length.


June 1, 2021

Complete microbial genomes, epigenomes, and transcriptomes using long-read PacBio Sequencing.

For comprehensive metabolic reconstructions and a resulting understanding of the pathways leading to natural products, it is desirable to obtain complete information about the genetic blueprint of the organisms used. Traditional Sanger and next-generation, short-read sequencing technologies have shortcomings with respect to read lengths and DNA-sequence context bias, leading to fragmented and incomplete genome information. The development of long-read, single molecule, real-time (SMRT) DNA sequencing from Pacific Biosciences, with >10,000 bp average read lengths and a lack of sequence context bias, now allows for the generation of complete genomes in a fully automated workflow. In addition to the genome sequence, DNA methylation is characterized in the process of sequencing. PacBio® sequencing has also been applied to microbial transcriptomes. Long reads enable sequencing of full-length cDNAs allowing for identification of complete gene and operon sequences without the need for transcript assembly. We will highlight several examples where these capabilities have been leveraged in the areas of industrial microbiology, including biocommodities, biofuels, bioremediation, new bacteria with potential commercial applications, antibiotic discovery, and livestock/plant microbiome interactions.


Talk with an expert

If you have a question, need to check the status of an order, or are interested in purchasing an instrument, we're here to help.