Menu

Asset Tag: single molecule real time

April 21, 2020

Chromosome-length haplotigs for yak and cattle from trio binning assembly of an F1 hybrid

Background Assemblies of diploid genomes are generally unphased, pseudo-haploid representations that do not correctly reconstruct the two parental haplotypes present in the individual sequenced. Instead, the assembly alternates between parental haplotypes and may contain duplications in regions where the parental haplotypes are sufficiently different. Trio binning is an approach to genome assembly that uses short reads from both parents to classify long reads from the offspring according to maternal or paternal haplotype origin, and is thus helped rather than impeded by heterozygosity. Using this approach, it is possible to derive two assemblies from an individual, accurately representing both parental contributions in their entirety with higher continuity and accuracy than is possible with other methods.Results We used trio binning to assemble reference genomes for two species from a single individual using an interspecies cross of yak (Bos grunniens) and cattle (Bos taurus). The high heterozygosity inherent to interspecies hybrids allowed us to confidently assign >99% of long reads from the F1 offspring to parental bins using unique k-mers from parental short reads. Both the maternal (yak) and paternal (cattle) assemblies contain over one third of the acrocentric chromosomes, including the two largest chromosomes, in single haplotigs.Conclusions These haplotigs are the first vertebrate chromosome arms to be assembled gap-free and fully phased, and the first time assemblies for two species have been created from a single individual. Both assemblies are the most continuous currently available for non-model vertebrates.MbmegabaseskbkilobasesMYAmillions of years agoMHCmajor histocompatibility complexSMRTsingle molecule real time

Read more
April 21, 2020

Potent LpxC Inhibitors with In Vitro Activity Against Multi-Drug Resistant Pseudomonas aeruginosa.

New drugs with novel mechanisms of resistance are desperately needed to address both community and nosocomial infections due to Gram-negative bacteria. One such potential target is LpxC, an essential enzyme that catalyzes the first committed step of Lipid A biosynthesis. Achaogen conducted an extensive research campaign to discover novel LpxC inhibitors with activity against Pseudomonas aeruginosa We report here the in vitro antibacterial activity and pharmacodynamics of ACHN-975, the only molecule from these efforts and the first ever LpxC inhibitor to be evaluated in Phase 1 clinical trials. In addition, we describe the profile of three additional LpxC inhibitors that were identified as potential lead molecules. These efforts did not produce an additional development candidate with a sufficiently large therapeutic window and the program was subsequently terminated.Copyright © 2019 American Society for Microbiology.

Read more
April 21, 2020

Evolution of a 72-kb cointegrant, conjugative multiresistance plasmid from early community-associated methicillin-resistant Staphylococcus aureus isolates.

Horizontal transfer of plasmids encoding antimicrobial-resistance and virulence determinants has been instrumental in Staphylococcus aureus evolution, including the emergence of community-associated methicillin-resistant S. aureus (CA-MRSA). In the early 1990s the first CA-MRSA isolated in Western Australia (WA), WA-5, encoded cadmium, tetracycline and penicillin-resistance genes on plasmid pWBG753 (~30 kb). WA-5 and pWBG753 appeared only briefly in WA, however, fusidic-acid-resistance plasmids related to pWBG753 were also present in the first European CA-MRSA at the time. Here we characterized a 72-kb conjugative plasmid pWBG731 present in multiresistant WA-5-like clones from the same period. pWBG731 was a cointegrant formed from pWBG753 and a pWBG749-family conjugative plasmid. pWBG731 carried mupirocin, trimethoprim, cadmium and penicillin-resistance genes. The stepwise evolution of pWBG731 likely occurred through the combined actions of IS257, IS257-dependent miniature inverted-repeat transposable elements (MITEs) and the BinL resolution system of the ß-lactamase transposon Tn552 An evolutionary intermediate ~42-kb non-conjugative plasmid pWBG715, possessed the same resistance genes as pWBG731 but retained an integrated copy of the small tetracycline-resistance plasmid pT181. IS257 likely facilitated replacement of pT181 with conjugation genes on pWBG731, thus enabling autonomous transfer. Like conjugative plasmid pWBG749, pWBG731 also mobilized non-conjugative plasmids carrying oriT mimics. It seems likely that pWBG731 represents the product of multiple recombination events between the WA-5 pWBG753 plasmid and other mobile genetic elements present in indigenous CA-MSSA. The molecular evolution of pWBG731 saliently illustrates how diverse mobile genetic elements can together facilitate rapid accrual and horizontal dissemination of multiresistance in S. aureus CA-MRSA.Copyright © 2019 American Society for Microbiology.

Read more
April 21, 2020

De novo assembly and annotation of the Ganoderma australe genome.

The Ganoderma genus represents clear biotechnological potential, due to the large quantity of molecules with biological activity that could be explored. However, available information regarding the biotechnological importance of species within Ganoderma, other than G. lucidum, is quite limited. Genomic studies of little-known species can contribute to the knowledge thereof, as well as the search for metabolic pathways and the identification of genes which code for proteins that may be of biotechnological relevance. Therefore, the objective of the present study was to obtain the G. australe genome, through the use of new sequencing technologies. Genomic DNA from G. australe was sequenced with the PacBio Sequel system, to a depth of 100×. The genome was assembled de novo with the Canu assembly tool, and gene prediction and annotation were performed with a funannotate pipeline. An assembled 84?Mb genome was obtained, and 22,756 putative protein-coding sequences were predicted in the G. australe genome. Ganoderic acid pathways were annotated and listed in the funannotate pipeline, and were recognized using Pfam and Antismash signals. Thus, the G. australe genome shows great potential, mainly, due to the annotation of putative sequences that could be employed in biotechnological approaches. Copyright © 2019 Elsevier Inc. All rights reserved.

Read more
April 21, 2020

An improved pig reference genome sequence to enable pig genetics and genomics research

The domestic pig (Sus scrofa) is important both as a food source and as a biomedical model with high anatomical and immunological similarity to humans. The draft reference genome (Sscrofa10.2) represented a purebred female pig from a commercial pork production breed (Duroc), and was established using older clone-based sequencing methods. The Sscrofa10.2 assembly was incomplete and unresolved redundancies, short range order and orientation errors and associated misassembled genes limited its utility. We present two highly contiguous chromosome-level genome assemblies created with more recent long read technologies and a whole genome shotgun strategy, one for the same Duroc female (Sscrofa11.1) and one for an outbred, composite breed male animal commonly used for commercial pork production (USMARCv1.0). Both assemblies are of substantially higher (>90-fold) continuity and accuracy compared to the earlier reference, and the availability of two independent assemblies provided an opportunity to identify large-scale variants and to error-check the accuracy of representation of the genome. We propose that the improved Duroc breed assembly (Sscrofa11.1) become the reference genome for genomic research in pigs.

Read more
April 21, 2020

Genome-Wide Association Study of Growth and Body-Shape-Related Traits in Large Yellow Croaker (Larimichthys crocea) Using ddRAD Sequencing.

Large yellow croaker (Larimichthys crocea) is an economically important marine fish species of China. Due to overfishing and marine pollution, the wild stocks of this croaker have collapsed in the past decades. Meanwhile, the cultured croaker is facing the difficulties of reduced genetic diversity and low growth rate. To explore the molecular markers related to the growth traits of croaker and providing the related SNPs for the marker-assisted selection, we used double-digest restriction-site associated DNA (ddRAD) sequencing to dissect the genetic bases of growth traits in a cultured population and identify the SNPs that associated with important growth traits by GWAS. A total of 220 individuals were genotyped by ddRAD sequencing. After quality control, 27,227 SNPs were identified in 220 samples and used for GWAS analysis. We identified 13 genome-wide significant associated SNPs of growth traits on 8 chromosomes, and the beta P of these SNPs ranged from 0.01 to 0.86. Through the definition of candidate regions and gene annotation, candidate genes related to growth were identified, including important regulators such as fgf18, fgf1, nr3c1, cyp8b1, fabp2, cyp2r1, ppara, and ccm2l. We also identified SNPs and candidate genes that significantly associated with body shape, including bmp7, col1a1, col11a2, and col18a1, which are also economically important traits for large yellow croaker aquaculture. The results provided insights into the genetic basis of growth and body shape in large yellow croaker population and would provide reliable genetic markers for molecular marker-assisted selection in the future. Meanwhile, the result established a basis for our subsequent fine mapping and related gene study.

Read more
April 21, 2020

Resistome and a Novel blaNDM-1-Harboring Plasmid of an Acinetobacter haemolyticus Strain from a Children’s Hospital in Puebla, Mexico.

Acinetobacter calcoaceticus-baumannii complex isolates have been frequently associated with hospital and community infections, with A. baumannii being the most common. Other Acinetobacter spp. not belonging to this complex also cause infections in hospital settings, and the incidence has increased over the past few years. Some species of the Acinetobacter genus possess a great diversity of antibiotic resistance mechanisms, such as efflux pumps, porins, and resistance genes that can be acquired and disseminated by mobilizable genetic elements. By means of whole-genome sequencing, we describe in the clinical Acinetobacter haemolyticus strain AN54 different mechanisms of resistance that involve blaOXA-265, blaNDM-1, aphA6, aac(6′)-Ig, and a resistance-nodulation-cell division-type efflux pump. This strain carries six plasmids, of which the plasmid pAhaeAN54e contains blaNDM-1 in a Tn125-like transposon that is truncated at the 3′ end. This strain also has an insertion sequence IS91 and seven genes encoding hypothetical proteins. The pAhaeAN54e plasmid is nontypable and different from other plasmids carrying blaNDM-1 that have been reported in Mexico and other countries. The presence of these kinds of plasmids in an opportunistic pathogen such as A. haemolyticus highlights the role that these plasmids play in the dissemination of antibiotic resistance genes, especially against carbapenems, in Mexican hospitals.

Read more
April 21, 2020

An Outbreak of KPC-Producing Klebsiella pneumoniae Linked with an Index Case of Community-Acquired KPC-Producing Isolate: Epidemiological Investigation and Whole Genome Sequencing Analysis.

Aims: A hospital outbreak of Klebsiella pneumoniae carbapenemase (KPC)-producing Klebsiella pneumoniae (KPN) linked with an index case of community-acquired infection occurred in an urban tertiary care hospital in Seoul, South Korea. Therefore, we performed an outbreak investigation and whole genome sequencing (WGS) analysis to trace the outbreak and investigate the molecular characteristics of the isolates. Results: From October 2014 to January 2015, we identified a cluster of three patients in the neurosurgery ward with sputum cultures positive for carbapenem-resistant KPN. An epidemiological investigation, including pulsed-field gel electrophoresis analysis was performed to trace the origins of this outbreak. The index patient’s infection was community acquired. Active surveillance cultures using perirectal swabbing from exposed patients, identified one additional patient with KPC-producing KPN colonization. WGS analyses using PacBio RSII instruments were performed for four linked isolates. WGS revealed a genetic linkage of the four isolates belonging to the same sequence type (ST307). All KPN isolates harbored conjugative resistance plasmids, which has blaKPC-2 carbapenemase genes contained within the Tn4401 “a” isoform and other resistance genes. However, WGS showed only three isolates among four KPC-producing KPN were originated from a common origin. Conclusions: This report demonstrates the challenge that KPC-2-producing KPN with the conjugative resistance plasmid may spread not only in hospitals but also in community, and WGS can help to accurately characterize the outbreak.

Read more
April 21, 2020

Complete genome sequence of Marinobacter sp. LQ44, a haloalkaliphilic phenol-degrading bacterium isolated from a deep-sea hydrothermal vent

Marinobacter sp. strain LQ44, an alkaliphile and moderate halophile from a deep-sea hydrothermal vent on the East Pacific Rise, is a novel phenol-degrading bacterium that is capable of utilizing phenol as sole carbon and energy sources. Here, we present the complete genome sequence of strain LQ44, which consists of 4,435,564?bp with a circular chromosome, 4164 protein-coding genes, 3 rRNA operons and 50 tRNAs. Genome analysis revealed that strain LQ44 may degrade phenol via meta-cleavage pathway. The LQ44 genome contains multiple genes involved in pH adaptation and osmotic adjustment. Genes related to hydrocarbon degradation, aerobic denitrification and potential industrial important enzymes were also identified from the genome. To our knowledge, this is the first report of a genome sequence of a haloalkaliphilic phenol-degrading bacterium, which will provide insights into the survival of this bacterium under salt-alkali conditions and the potential for biotechnological applications.

Read more
April 21, 2020

A robust benchmark for germline structural variant detection

New technologies and analysis methods are enabling genomic structural variants (SVs) to be detected with ever-increasing accuracy, resolution, and comprehensiveness. Translating these methods to routine research and clinical practice requires robust benchmark sets. We developed the first benchmark set for identification of both false negative and false positive germline SVs, which complements recent efforts emphasizing increasingly comprehensive characterization of SVs. To create this benchmark for a broadly consented son in a Personal Genome Project trio with broadly available cells and DNA, the Genome in a Bottle (GIAB) Consortium integrated 19 sequence-resolved variant calling methods, both alignment- and de novo assembly-based, from short-, linked-, and long-read sequencing, as well as optical and electronic mapping. The final benchmark set contains 12745 isolated, sequence-resolved insertion and deletion calls =50 base pairs (bp) discovered by at least 2 technologies or 5 callsets, genotyped as heterozygous or homozygous variants by long reads. The Tier 1 benchmark regions, for which any extra calls are putative false positives, cover 2.66 Gbp and 9641 SVs supported by at least one diploid assembly. Support for SVs was assessed using svviz with short-, linked-, and long-read sequence data. In general, there was strong support from multiple technologies for the benchmark SVs, with 90 % of the Tier 1 SVs having support in reads from more than one technology. The Mendelian genotype error rate was 0.3 %, and genotype concordance with manual curation was >98.7 %. We demonstrate the utility of the benchmark set by showing it reliably identifies both false negatives and false positives in high-quality SV callsets from short-, linked-, and long-read sequencing and optical mapping.

Read more
April 21, 2020

The Genome of the Zebra Mussel, Dreissena polymorpha: A Resource for Invasive Species Research

The zebra mussel, Dreissena polymorpha, continues to spread from its native range in Eurasia to Europe and North America, causing billions of dollars in damage and dramatically altering invaded aquatic ecosystems. Despite these impacts, there are few genomic resources for Dreissena or related bivalves, with nearly 450 million years of divergence between zebra mussels and its closest sequenced relative. Although the D. polymorpha genome is highly repetitive, we have used a combination of long-read sequencing and Hi-C-based scaffolding to generate the highest quality molluscan assembly to date. Through comparative analysis and transcriptomics experiments we have gained insights into processes that likely control the invasive success of zebra mussels, including shell formation, synthesis of byssal threads, and thermal tolerance. We identified multiple intact Steamer-Like Elements, a retrotransposon that has been linked to transmissible cancer in marine clams. We also found that D. polymorpha have an unusual 67 kb mitochondrial genome containing numerous tandem repeats, making it the largest observed in Eumetazoa. Together these findings create a rich resource for invasive species research and control efforts.

Read more
April 21, 2020

ASA3P: An automatic and scalable pipeline for the assembly, annotation and higher level analysis of closely related bacterial isolates

Whole genome sequencing of bacteria has become daily routine in many fields. Advances in DNA sequencing technologies and continuously dropping costs have resulted in a tremendous increase in the amounts of available sequence data. However, comprehensive in-depth analysis of the resulting data remains an arduous and time consuming task. In order to keep pace with these promising but challenging developments and to transform raw data into valuable information, standardized analyses and scalable software tools are needed. Here, we introduce ASA3P, a fully automatic, locally executable and scalable assembly, annotation and analysis pipeline for bacterial genomes. The pipeline automatically executes necessary data processing steps, i.e. quality clipping and assembly of raw sequencing reads, scaffolding of contigs and annotation of the resulting genome sequences. Furthermore, ASA3P conducts comprehensive genome characterizations and analyses, e.g. taxonomic classification, detection of antibiotic resistance genes and identification of virulence factors. All results are presented via an HTML5 user interface providing aggregated information, interactive visualizations and access to intermediate results in standard bioinformatics file formats. We distribute ASA3P in two versions: a locally executable Docker container for small-to-medium-scale projects and an OpenStack based cloud computing version able to automatically create and manage self-scaling compute clusters. Thus, automatic and standardized analysis of hundreds of bacterial genomes becomes feasible within hours. The software and further information is available at: http://asap.computational.bio.

Read more
April 21, 2020

Whole-genome sequence of Arthrinium phaeospermum, a globally distributed pathogenic fungus.

Arthrinium phaeospermum (Corda) M.B. Ellis is a globally distributed pathogenic fungus with a wide host range; its hosts include not only plants, but also humans and animals. This study aimed to develop genomic resources for A. phaeospermum to provide solid data and a theoretical basis for further studies of its pathogenesis, transcriptomics, proteomics, metabolomics and RNA genomics. The genome was obtained from the mycelia of the strain AP-Z13 using a combination of analyses with the high-throughput Illumina HiSeq 4000 system and PacBio RSII LongRead sequencing platform. Functional annotation was performed by BLASTing protein sequences against those in different publicly available databases to obtain their corresponding annotations. The genome is 48.45?Mb in size, with an N90 scaffold size of 1,931,147?bp, and encodes 19,836 putative predicted genes. This is the first report of the genome-scale assembly and annotation for A. phaeospermum, the first species in the genus Arthrinium to be subjected to whole genome sequencing. Copyright © 2019 Elsevier Inc. All rights reserved.

Read more
April 21, 2020

Generating amplicon reads for microbial community assessment with next-generation sequencing.

Marker gene amplicon sequencing is often preferred over whole genome sequencing for microbial community characterization, due to its lower cost while still enabling assessment of uncultivable organisms. This technique involves many experimental steps, each of which can be a source of errors and bias. We present an up-to-date overview of the whole experimental pipeline, from sampling to sequencing reads, and give information allowing for informed choices at each step of both planning and execution of a microbial community assessment study. When applicable, we also suggest ways of avoiding inherent pitfalls in amplicon sequencing. © 2019 The Society for Applied Microbiology.

Read more
April 21, 2020

Rational development of transformation in Clostridium thermocellum ATCC 27405 via complete methylome analysis and evasion of native restriction-modification systems.

A major barrier to both metabolic engineering and fundamental biological studies is the lack of genetic tools in most microorganisms. One example is Clostridium thermocellum ATCC 27405T, where genetic tools are not available to help validate decades of hypotheses. A significant barrier to DNA transformation is restriction-modification systems, which defend against foreign DNA methylated differently than the host. To determine the active restriction-modification systems in this strain, we performed complete methylome analysis via single-molecule, real-time sequencing to detect 6-methyladenine and 4-methylcytosine and the rarely used whole-genome bisulfite sequencing to detect 5-methylcytosine. Multiple active systems were identified, and corresponding DNA methyltransferases were expressed from the Escherichia coli chromosome to mimic the C. thermocellum methylome. Plasmid methylation was experimentally validated and successfully electroporated into C. thermocellum ATCC 27405. This combined approach enabled genetic modification of the C. thermocellum-type strain and acts as a blueprint for transformation of other non-model microorganisms.

Read more

Subscribe for blog updates:

Talk with an expert

If you have a question, need to check the status of an order, or are interested in purchasing an instrument, we're here to help.