Goat is an important source of milk, meat, and fiber, especially in developing countries. An advantage of goats as livestock is the low maintenance requirements and high adaptability compared to other milk producers. The global population of domestic goats exceeds 800 million. In Africa, goat production is characterized by low productivity levels, and attempts to introduce more productive breeds have met with poor success due in part to nutritional constraints. It has been suggested that incorporation of selective breeding within the herds adapted for survival could represent one approach to improving food security across Africa. A recently produced genome assembly of a Chinese Yunnan breed goat, based on 192 Gb of short reads across a range of insert sizes from 180 bp to 20 kb, reported a contig N50 of 18.7 kb. The scaffold N50 was improved from 2.2 Mb to 3.1 Mb by addition of fosmid end sequence, with an estimated 140 million Ns in gaps and 91% coverage. The assembly has proven somewhat problematic for pursuing genome-wide association analysis with SNP arrays, apparently due in part to errors in ordering of markers using the draft genome. In order to provide a higher quality assembly, we sequenced a highly inbred, San Clemente breed goat genome using 458 SMRT cells on the Pacific Biosciences platform. These cells generated 193.5 Gbases of sequence after processing into subreads, with mean 5110 bases and max subread length of 40.5 kb. This sequence data generated an assembly using the recently reported MHAP error correction approach and Celera Assembler v8.2. The contig N50 was 2.5 Mb, with the largest contig spanning 19.5 Mb. Additional characteristics of the assembly will be presented.
While advances in RNA sequencing methods have accelerated our understanding of the human transcriptome, isoform discovery remains a challenge because short read lengths require complicated assembly algorithms to infer the contiguity of full-length transcripts. With PacBio’s long reads, one can now sequence full-length transcript isoforms up to 10 kb. The PacBio Iso- Seq protocol produces reads that originate from independent observations of single molecules, meaning no assembly is needed. Here, we sequenced the transcriptome of the human MCF-7 breast cancer cell line using the Clontech SMARTer® cDNA preparation kit and the PacBio RS II. Using PacBio Iso-Seq bioinformatics software, we obtained 55,770 unique, full-length, high-quality transcript sequences that were subsequently mapped back to the human genome with = 99% accuracy. In addition, we identified both known and novel fusion transcripts. To assess our results, we compared the predicted ORFs from the PacBio data against a published mass spectrometry dataset from the same cell line. 84% of the proteins identified with the Uniprot protein database were recovered by the PacBio predictions. Notably, 251 peptides solely matched to the PacBio generated ORFs and were entirely novel, including abundant cases of single amino acid polymorphisms, cassette exon splicing and potential alternative protein coding frames.
2015 SMRT Informatics Developers Conference Presentation Slides: Ali Bashir of Mount Sinai School of Medicine discussed methods for characterizing structural variation in human genomes across a variety of coverage levels.
2015 SMRT Informatics Developers Conference Presentation Slides: Shinichi Morishita of the University of Tokyo presented on how his team has been using SMRT Sequencing to better understand methylomes, metagenomes and structural variation of various eukaryotic genomes.
The Genome in a Bottle Consortium is developing the reference materials, reference methods , and reference data n
Building a platinum human genome assembly from single haplotype human genomes generated from long molecule sequencing
The human reference sequence has provided a foundation for studies of genome structure, human variation, evolutionary biology, and disease. At the time the reference was originally completed there were some loci recalcitrant to closure; however, the degree to which structural variation and diversity affected our ability to produce a representative genome sequence at these loci was still unknown. Many of these regions in the genome are associated with large, repetitive sequences and exhibit complex allelic diversity such producing a single, haploid representation is not possible. To overcome this challenge, we have sequenced DNA from two hydatidiform moles (CHM1 and CHM13), which are essentially haploid. CHM13 was sequenced with the latest PacBio technology (P6-C5) to 52X genome coverage and assembled using Daligner and Falcon v0.2 (GCA_000983455.1, CHM13_1.1). Compared to the first mole (CHM1) PacBio assembly (GCA_001007805.1, 54X) contig N50 of 4.5Mb, the contig N50 of CHM13_1.1 is almost 13Mb, and there is a 13-fold reduction in the number of contigs. This demonstrates the improved contiguity of sequence generated with the new chemistry. We annotated 50,188 RefSeq transcripts of which only 0.63% were split transcripts, and the repetitive and segmental duplication content was within the expected range. These data all indicate an extremely high quality assembly. Additionally, we sequenced CHM13 DNA using Illumina SBS technology to 60X coverage, aligned these reads to the GRCh37, GRCh38, and CHM13_1.1 assemblies and performed variant calling using the SpeedSeq pipeline. The number of single nucleotide variants (SNV) and indels was comparable between GRCh37 and GRCh38. Regions that showed increased SNV density in GRCh38 compared to GRCh37 could be attributed to the addition of centromeric alpha satellite sequence to the reference assembly. Alternatively, regions of decreased SNV density in GRCh38 were concentrated in regions that were improved from BAC based sequencing of CHM1 such as 1p12 and 1q21 containing the SRGAP2 gene family. The alignment of PacBio reads to GRCh37 and GRCh38 assemblies allowed us to resolve complex loci such as the MHC region where the best alignment was to the DBB (A2-B57-DR7) haplotype. Finally, we will discuss how combining the two high quality mole assemblies can be used for benchmarking and novel bioinformatics tool development.
Comprehensive genome and transcriptome structural analysis of a breast cancer cell line using PacBio long read sequencing
Genomic instability is one of the hallmarks of cancer, leading to widespread copy number variations, chromosomal fusions, and other structural variations. The breast cancer cell line SK-BR-3 is an important model for HER2+ breast cancers, which are among the most aggressive forms of the disease and affect one in five cases. Through short read sequencing, copy number arrays, and other technologies, the genome of SK-BR-3 is known to be highly rearranged with many copy number variations, including an approximately twenty-fold amplification of the HER2 oncogene. However, these technologies cannot precisely characterize the nature and context of the identified genomic events and other important mutations may be missed altogether because of repeats, multi-mapping reads, and the failure to reliably anchor alignments to both sides of a variation. To address these challenges, we have sequenced SK-BR-3 using PacBio long read technology. Using the new P6-C4 chemistry, we generated more than 70X coverage of the genome with average read lengths of 9-13kb (max: 71kb). Using Lumpy for split-read alignment analysis, as well as our novel assembly-based algorithms for finding complex variants, we have developed a detailed map of structural variations in this cell line. Taking advantage of the newly identified breakpoints and combining these with copy number assignments, we have developed an algorithm to reconstruct the mutational history of this cancer genome. From this we have discovered a complex series of nested duplications and translocations between chr17 and chr8, two of the most frequent translocation partners in primary breast cancers, resulting in amplification of HER2. We have also carried out full-length transcriptome sequencing using PacBio’s Iso-Seq technology, which has revealed a number of previously unrecognized gene fusions and isoforms. Combining long-read genome and transcriptome sequencing technologies enables an in-depth analysis of how changes in the genome affect the transcriptome, including how gene fusions are created across multiple chromosomes. This analysis has established the most complete cancer reference genome available to date, and is already opening the door to applying long-read sequencing to patient samples with complex genome structures.
The free-living flatworm, Macrostomum lignano, much like its better known planarian relative, Schmidtea mediterranea, has an impressive regenerative capacity. Following injury, this species has the ability to regenerate almost an entirely new organism. This is attributable to the presence of an abundant somatic stem cell population, the neoblasts. These cells are also essential for the ongoing maintenance of most tissues, as their loss leads to irreversible degeneration of the animal. This set of unique properties makes a subset of flatworms attractive organisms for studying the evolution of pathways involved in tissue self-renewal, cell fate specification, and regeneration. The use of these organisms as models, however, is hampered by the lack of a well-assembled and annotated genome sequences, fundamental to modern genetic and molecular studies. Here we report the genomic sequence of Macrostomum lignano and an accompanying characterization of its transcriptome. The genome structure of M. lignano is remarkably complex, with ~75% of its sequence being comprised of simple repeats and transposon sequences. This has made high quality assembly from Illumina reads alone impossible (N50=222 bp). We therefore generated 130X coverage by long sequencing reads from the PacBio platform to create a substantially improved assembly with an N50 of 64 Kbp. We complemented the reference genome with an assembled and annotated transcriptome, and used both of these datasets in combination to probe gene expression patterns during regeneration, examining pathways important to stem cell function. As a whole, our data will provide a crucial resource for the community for the study not only of invertebrate evolution and phylogeny but also of regeneration and somatic pluripotency.
Several new 3rd generation long-range DNA sequencing and mapping technologies have recently become available that are starting to create a resurgence in genome sequence quality. Unlike their 2nd generation, shortread counterparts that can resolve a few hundred or a few thousand basepairs, the new technologies can routinely sequence 10,000 bp reads or map across 100,000 bp molecules. The substantially greater lengths are being used to enhance a number of important problems in genomics and medicine, including de novo genome assembly, structural variation detection, and haplotype phasing. Here we discuss the capabilities of the latest technologies, and show how they will improve the “3Cs of Genome Assembly”: the contiguity, completeness, and correctness. We derive this analysis from (1) a metaanalysis of the currently available 3rd generation genome assemblies, (2) a retrospective analysis of the evolution of the reference human genome, and (3) extensive simulations with dozens of species across the tree of life. We also propose a model using support vector regression (SVR) that predicts genome assembly performance using four features: read lengths(L) and coverage values(C) that can be used for evaluating potential technologies along with genome size(G) and repeats(R) that present species specific characteristics. The proposed model significantly improves genome assembly performance prediction by adopting data-driven approach and addressing limitations of the previous hypothesis-driven methodology. Overall, we anticipate these technologies unlock the genomic “dark matter”, and provide many new insights into evolution, agriculture, and human diseases.
For highly complex and large genomes, a well-annotated genome may be computationally challenging and costly, yet the study of alternative splicing events and gene annotations usually rely on the existence of a genome. Long-read sequencing technology provides new opportunities to sequence full-length cDNAs, avoiding computational challenges that short read transcript assembly brings. The use of single molecule, real-time sequencing from Pacific Biosciences to sequence transcriptomes (the Iso-SeqTM method), which produces de novo, high-quality, full-length transcripts, has revealed an astonishing amount of alternative splicing in eukaryotic species. With the Iso-Seq method, it is now possible to reconstruct the transcribed regions of the genome using just the transcripts themselves. We present Cogent, a tool for finding gene families and reconstructing the coding genome in the absence of a reference genome. Cogent uses k-mer similarities to first partition the transcripts into different gene families. Then, for each gene family, the transcripts are used to build a splice graph. Cogent identifies bubbles resulting from sequencing errors, minor variants, and exon skipping events, and attempts to resolve each splice graph down to the minimal set of reconstructed contigs. We apply Cogent to a Cuttlefish Iso-Seq dataset, for which there is a highly fragmented, Illumina-based draft genome assembly and little annotation. We show that Cogent successfully discovers gene families and can reconstruct the coding region of gene loci. The reconstructed contigs can then be used to visualize alternative splicing events, identify minor variants, and even be used to improve genome assemblies.
Goats are specialized in dairy, meat and fiber production, being adapted to a wide range of environmental conditions and having a large economic impact in developing countries. In the last years, there have been dramatic advances in the knowledge of the structure and diversity of the goat genome/transcriptome and in the development of genomic tools, rapidly narrowing the gap between goat and related species such as cattle and sheep. Major advances are: 1) publication of a de novo goat genome reference sequence; 2) Development of whole genome high density RH maps, and; 3) Design of a commercial 50K SNP array. Moreover, there are currently several projects aiming at improving current genomic tools and resources. An improved assembly of the goat genome using PacBio reads is being produced, and the design of new SNP arrays is being studied to accommodate the specific needs of this species in the context of very large scale genotyping projects (i.e. breed characterization at an international scale and genomic selection) and parentage analysis. As in other species, the focus has now turned to the identification of causative mutations underlying the phenotypic variation of traits. In addition, since 2014, the ADAPTmap project (www.goatadaptmap.org) has gathered data to explore the diversity of caprine populations at a worldwide scale by using a wide variety of approaches and data.
Reference genome assemblies provide important context in genetics by standardizing the order of genes and providing a universal set of coordinates for individual nucleotides. Often due to the high complexity of genic regions and higher copy number of genes involved in immune function, immunity-related genes are often misassembled in current reference assemblies. This problem is particularly ubiquitous in the reference genomes of non-model organisms as they often do not receive the years of curation necessary to resolve annotation and assembly errors. In this study, we reassemble a reference genome of the goat (Capra hircus) using modern PacBio technology in tandem with BioNano Genomics Irys optical maps and Lachesis clustering in order to provide a high quality reference assembly without the need for extensive filtering. Initial PacBio assemblies using P5C4 chemistry achieved contig N50’s of 4 Megabases and a BUSCO completion score of 84.0%, which is comparable to several finished model organism reference assemblies. We used BioNano Genomics’ Irys platform to generate 336 scaffolds from this data with a scaffold N50 of 24 megabases and total genome coverage of 98%. Lachesis interaction maps were used with a clustering algorithm to associate Irys scaffolds into the expected 30 chromosome physical maps. Comparisons of the initial hybrid scaffolds generated from the long read contigs and optical map information to a previously generated RH map revealed that the entirety of the Goat autosome 20 physical map was contained within one scaffold. Additionally, the BioNano scaffolding resolved several difficult regions that contained genes related to innate immunity which were problem regions in previous reference genome assemblies.
A comprehensive study of the sugar pine (Pinus lambertiana) transcriptome implemented through diverse next-generation sequencing approaches
The assembly, annotation, and characterization of the sugar pine (Pinus lambertiana Dougl.) transcriptome represents an opportunity to study the genetic mechanisms underlying resistance to the invasive white pine blister rust (Cronartium ribicola) as well as responses to other abiotic stresses. The assembled transcripts also provide a resource to improve the genome assembly. We selected a diverse set of tissues allowing the first comprehensive evaluation of the sugar pine gene space. We have combined short read sequencing technologies (Illumina MiSeq and HiSeq) with the relatively new Pacific Biosciences Iso-Seq approach. From the 2.5 billion and 1.6 million Illumina and PacBio (46 SMRT cells) reads, 33,720 unigenes were de novo assembled. Comparison of sequencing technologies revealed improved coverage with Illumina HiSeq reads and better splice variant detection with PacBio Iso-Seq reads. The genes identified as unique to each library ranges from 199 transcripts (basket seedling) to 3,482 transcripts (female cones). In total, 10,026 transcripts were shared by all libraries. Genes differentially expressed in response to these provided insight on abiotic and biotic stress responses. To analyze orthologous sequences, we compared the translated sequences against 19 plant species, identifying 7,229 transcripts that clustered uniquely among the conifers. We have generated here a high quality transcriptome from one WPBR susceptible and one WPBR resistant sugar pine individual. Through the comprehensive tissue sampling and the depth of the sequencing achieved, detailed information on disease resistance can be further examined.
From Sequencing to Chromosomes: New de novo assembly and scaffolding methods improve the goat reference genome
Single-molecule sequencing is now routinely used to assemble complete, high-quality microbial genomes, but these assembly methods have not scaled well to large genomes. To address this problem, we previously introduced the MinHash Alignment Process (MHAP) for overlapping single-molecule reads using probabilistic, locality-sensitive hashing. Integrating MHAP with Celera Assembler (CA) has enabled reference-grade assemblies of model organisms, revealing novel heterochromatic sequences and filling low-complexity gap sequences in the GRCh38 human reference genome. We have applied our methods to assemble the San Clemente goat genome. Combining single-molecule sequencing from Pacific Biosciences and BioNano Genomics generates and assembly that is over 150-fold more contiguous than the latest Capra hircus reference. In combination with Hi-C sequencing, the assembly surpasses reference assemblies, de novo, with minimal manual intervention. The autosomes are each assembled into a single scaffold. Our assembly provides a more complete gene reconstruction, better alignments with Goat 52k chip, and improved allosome reconstruction. In addition to providing increased continuity of sequence, our assembly achieves a higher BUSCO completion score (84%) than the existing goat reference assembly suggesting better quality annotation of gene models. Our results demonstrate that single-molecule sequencing can produce near-complete eukaryotic genomes at modest cost and minimal manual effort.
Reference quality de novo genome assemblies were once solely the domain of large, well-funded genome projects. While next-generation short read technology removed some of the cost barriers, accurate chromosome-scale assembly remains a real challenge. Here we present efforts to de novo assemble the goat (Capra hircus) genome. Through the combination of single-molecule technologies from Pacific Biosciences (sequencing) and BioNano Genomics (optical mapping) coupled with high-throughput chromosome conformation capture sequencing (Hi-C), an inbred San Clemente goat genome has been sequenced and assembled to a high degree of completeness at a relatively modest cost. Starting with 38 million PacBio reads, we integrated the MinHash Alignment Process (MHAP) with the Celera Assembler (CA) to produce an assembly composed of 3110 contigs with a contig N50 size of 4.7 Mb. This assembly was scaffolded with BioNano genome maps derived from a single IrysChip into 333 scaffolds with an N50 of 23.1 Mb including the complete scaffolding of chromosome 20. Finally, cis-chromosome associations were determined by Hi-C, yielding complete reconstruction of all autosomes into single scaffolds with a final N50 of 91.7 Mb. We hope to demonstrate that our methods are not only cost effective, but improve our ability to annotate challenging genomic regions such as highly repetitive immune gene clusters.