Menu

Auto Tag: Long-read

April 21, 2020

Complete Genome Sequence of strain WHRI 3811, race 1 of Xanthomonas campestris pv. campestris, the Causal Agent of Black Rot of Cruciferous Vegetables.

Xanthomonas campestris pv. campestris (Xcc) is an important bacterial pathogen that causes black rot and brings about enormous production loss for cruciferous vegetables worldwide. Currently, genome sequences for only a few Xcc isolates are available, most of which are draft ones. Based on the next-generation sequencing (NGS) and single-molecule sequencing in real time (SMRT) technologies, we present here the complete genome sequence of strain WHRI 3811, race 1 of Xcc, which is a type strain that has been extensively used. The genome data will contribute to our understanding of Xcc genomic features, and pave the way for research on Xcc-host interactions.

Read more
April 21, 2020

Cultured Epidermal Autografts from Clinically Revertant Skin as a Potential Wound Treatment for Recessive Dystrophic Epidermolysis Bullosa.

Inherited skin disorders have been reported recently to have sporadic normal-looking areas, where a portion of the keratinocytes have recovered from causative gene mutations (revertant mosaicism). We observed a case of recessive dystrophic epidermolysis bullosa treated with cultured epidermal autografts (CEAs), whose CEA-grafted site remained epithelized for 16 years. We proved that the CEA product and the grafted area included cells with revertant mosaicism. Based on these findings, we conducted an investigator-initiated clinical trial of CEAs from clinically revertant skin for recessive dystrophic epidermolysis bullosa. The donor sites were analyzed by genetic analysis, immunofluorescence, electron microscopy, and quantification of the reverted mRNA with deep sequencing. The primary endpoint was the ulcer epithelization rate per patient at 4 weeks after the last CEA application. Three patients with recessive dystrophic epidermolysis bullosa with 8 ulcers were enrolled, and the epithelization rate for each patient at the primary endpoint was 87.7%, 100%, and 57.0%, respectively. The clinical effects were found to persist for at least 76 weeks after CEA transplantation. One of the three patients had apparent revertant mosaicism in the donor skin and in the post-transplanted area. CEAs from clinically normal skin are a potentially well-tolerated treatment for recessive dystrophic epidermolysis bullosa.Copyright © 2019 The Authors. Published by Elsevier Inc. All rights reserved.

Read more
April 21, 2020

Haplotype-Resolved Cattle Genomes Provide Insights Into Structural Variation and Adaptation

We present high quality, phased genome assemblies representative of taurine and indicine cattle, subspecies that differ markedly in productivity-related traits and environmental adaptation. We report a new haplotype-aware scaffolding and polishing pipeline using contigs generated by the trio binning method to produce haplotype-resolved, chromosome-level genome assemblies of Angus (taurine) and Brahman (indicine) cattle breeds. These assemblies were used to identify structural and copy number variants that differentiate the subspecies and we found variant detection was sensitive to the specific reference genome chosen. Six gene families with immune related functions are expanded in the indicine lineage. Assembly of the genomes of both subspecies from a single individual enabled transcripts to be phased to detect allele-specific expression, and to study genome-wide selective sweeps. An indicus-specific extra copy of fatty acid desaturase is under positive selection and may contribute to indicine adaptation to heat and drought.

Read more
April 21, 2020

Construction and comparison of three reference-quality genome assemblies for soybean.

We report reference-quality genome assemblies and annotations for two accessions of soybean (Glycine max) and one of Glycine soja, the closest wild relative of G. max. The G. max assemblies are for widely used U.S. cultivars: the northern line ‘Williams 82’ (Wm82); and the southern line ‘Lee’. The Wm82 assembly improves the prior published assembly, and the Lee and G. soja assemblies are new for these accessions. Comparisons among the three accessions show generally high structural conservation, but nucleotide difference of 1.7 SNPs/kb between Wm82 and Lee, and 4.7 SNPs/kb between these lines and G. soja. SNP distributions and comparisons with genotypes of the Lee and Wm82 parents highlight patterns of introgressions and haplotype structure. Comparisons against the U.S. germplasm collection shows placement of the sequenced accessions relative to global soybean diversity. Analysis of a pan-gene collection shows generally high conservation, with variation occurring primarily in genomically clustered gene families. We found ~40-42 inversions per chromosome between either Lee or Wm82v4 and G. soja, and ~32 inversions per chromosome between Wm82 and Lee. We also investigated five domestication loci. For each locus, we found two different alleles with functional differences between G. soja and the two domesticated accessions. The genome assemblies for multiple cultivated accessions and for the closest wild ancestor of soybean provides a valuable set of resources for identifying causal variants that underlie traits for soybean’s domestication and improvement, serving as a basis for future research and crop improvement efforts for this important crop species. This article is protected by copyright. All rights reserved.This article is protected by copyright. All rights reserved.

Read more
April 21, 2020

Complete Genome Sequence of a Chlorobenzene Degrader, Pandoraea pnomenusa MCB032.

Chlorobenzenes are ubiquitously distributed, highly persistent, and toxic environmental contaminants. Pandoraea pnomenusa MCB032 was isolated as a new dominant chlorobenzene-utilizing strain from a functionally stable bioreactor during the treatment of chlorobenzenes when strain Burkholderia sp. JS150 disappeared. In study, we report the complete genome sequence of strain MCB032 which consists of a circular chromosome and three plasmids, which are?~?6 Mb in length with 5450 open reading frames-12 encoding rRNAs and 77 encoding tRNAs. We further identified 17 putative genes encoding the enzymes involved in the methyl-accepting chemotaxis proteins in sensing chemical gradients during chemotaxis. The annotated complete genome sequence of this strain will provide genetic insights into the degradation of chlorinated aromatic compounds. The information will empower the elucidation of chlorobenzene affinity hierarchy and species succession in the bioreactor.

Read more
April 21, 2020

De novo assembly of a wild pear (Pyrus betuleafolia) genome.

China is the origin and evolutionary centre of Oriental pears. Pyrus betuleafolia is a wild species native to China and distributed in the northern region, and it is widely used as rootstock. Here, we report the de novo assembly of the genome of P. betuleafolia-Shanxi Duli using an integrated strategy that combines PacBio sequencing, BioNano mapping and chromosome conformation capture (Hi-C) sequencing. The genome assembly size was 532.7 Mb, with a contig N50 of 1.57 Mb. A total of 59 552 protein-coding genes and 247.4 Mb of repetitive sequences were annotated for this genome. The expansion genes in P. betuleafolia were significantly enriched in secondary metabolism, which may account for the organism’s considerable environmental adaptability. An alignment analysis of orthologous genes showed that fruit size, sugar metabolism and transport, and photosynthetic efficiency were positively selected in Oriental pear during domestication. A total of 573 nucleotide-binding site (NBS)-type resistance gene analogues (RGAs) were identified in the P. betuleafolia genome, 150 of which are TIR-NBS-LRR (TNL)-type genes, which represented the greatest number of TNL-type genes among the published Rosaceae genomes and explained the strong disease resistance of this wild species. The study of flavour metabolism-related genes showed that the anthocyanidin reductase (ANR) metabolic pathway affected the astringency of pear fruit and that sorbitol transporter (SOT) transmembrane transport may be the main factor affecting the accumulation of soluble organic matter. This high-quality P. betuleafolia genome provides a valuable resource for the utilization of wild pear in fundamental pear studies and breeding. © 2019 The Authors. Plant Biotechnology Journal published by Society for Experimental Biology and The Association of Applied Biologists and John Wiley & Sons Ltd.

Read more
April 21, 2020

The evaluation of RNA-Seq de novo assembly by PacBio long read sequencing

RNA-Seq de novo assembly is an important method to generate transcriptomes for non-model organisms before any downstream analysis. Given many great de novo assembly methods developed by now, one critical issue is that there is no consensus on the evaluation of de novo assembly methods yet. Therefore, to set up a benchmark for evaluating the quality of de novo assemblies is very critical. Addressing this challenge will help us deepen the insights on the properties of different de novo assemblers and their evaluation methods, and provide hints on choosing the best assembly sets as transcriptomes of non-model organisms for the further functional analysis. In this article, we generate a textquotedblleftreal timetextquotedblright transcriptome using PacBio long reads as a benchmark for evaluating five de novo assemblers and two model-based de novo assembly evaluation methods. By comparing the de novo assmblies generated by RNA-Seq short reads with the textquotedblleftreal timetextquotedblright transcriptome from the same biological sample, we find that Trinity is best at the completeness by generating more assemblies than the alternative assemblers, but less continuous and having more misassemblies; Oases is best at the continuity and specificity, but less complete; The performance of SOAPdenovo-Trans, Trans-AByss and IDBA-Tran are in between of five assemblers. For evaluation methods, DETONATE leverages multiple aspects of the assembly set and ranks the assembly set with an average performance as the best, meanwhile the contig score can serve as a good metric to select assemblies with high completeness, specificity, continuity but not sensitive to misassemblies; TransRate contig score is useful for removing misassemblies, yet often the assemblies in the optimal set is too few to be used as a transcriptome.

Read more
April 21, 2020

Biochemical characterization of a novel cold-adapted agarotetraose-producing a-agarase, AgaWS5, from Catenovulum sediminis WS1-A.

Although many ß-agarases that hydrolyze the ß-1,4 linkages of agarose have been biochemically characterized, only three a-agarases that hydrolyze the a-1,3 linkages are reported to date. In this study, a new a-agarase, AgaWS5, from Catenovulum sediminis WS1-A, a new agar-degrading marine bacterium, was biochemically characterized. AgaWS5 belongs to the glycoside hydrolase (GH) 96 family. AgaWS5 consists of 1295 amino acids (140 kDa) and has the 65% identity to an a-agarase, AgaA33, obtained from an agar-degrading bacterium Thalassomonas agarivorans JAMB-A33. AgaWS5 showed the maximum activity at a pH and temperature of 8 and 40 °C, respectively. AgaWS5 showed a cold-tolerance, and it retained more than 40% of its maximum enzymatic activity at 10 °C. AgaWS5 is predicted to have several calcium-binding sites. Thus, its activity was slightly enhanced in the presence of Ca2+, and was strongly inhibited by EDTA. The Km and Vmax of AgaWS5 for agarose were 10.6 mg/mL and 714.3 U/mg, respectively. Agarose-liquefication, thin layer chromatography, and mass and NMR spectroscopic analyses demonstrated that AgaWS5 is an endo-type a-agarase that degrades agarose and mainly produces agarotetraose. Thus, in this study, a novel cold-adapted GH96 agarotetraose-producing a-agarase was identified.

Read more
April 21, 2020

Chlorella vulgaris genome assembly and annotation reveals the molecular basis for metabolic acclimation to high light conditions.

Chlorella vulgaris is a fast-growing fresh-water microalga cultivated at the industrial scale for applications ranging from food to biofuel production. To advance our understanding of its biology and to establish genetics tools for biotechnological manipulation, we sequenced the nuclear and organelle genomes of Chlorella vulgaris 211/11P by combining next generation sequencing and optical mapping of isolated DNA molecules. This hybrid approach allowed to assemble the nuclear genome in 14 pseudo-molecules with an N50 of 2.8 Mb and 98.9% of scaffolded genome. The integration of RNA-seq data obtained at two different irradiances of growth (high light-HL versus low light -LL) enabled to identify 10,724 nuclear genes, coding for 11,082 transcripts. Moreover 121 and 48 genes were respectively found in the chloroplast and mitochondrial genome. Functional annotation and expression analysis of nuclear, chloroplast and mitochondrial genome sequences revealed peculiar features of Chlorella vulgaris. Evidence of horizontal gene transfers from chloroplast to mitochondrial genome was observed. Furthermore, comparative transcriptomic analyses of LL vs HL provide insights into the molecular basis for metabolic rearrangement in HL vs. LL conditions leading to enhanced de novo fatty acid biosynthesis and triacylglycerol accumulation. The occurrence of a cytosolic fatty acid biosynthetic pathway can be predicted and its upregulation upon HL exposure is observed, consistent with increased lipid amount under HL. These data provide a rich genetic resource for future genome editing studies, and potential targets for biotechnological manipulation of Chlorella vulgaris or other microalgae species to improve biomass and lipid productivity.This article is protected by copyright. All rights reserved.

Read more
April 21, 2020

Chromosome-length haplotigs for yak and cattle from trio binning assembly of an F1 hybrid

Background Assemblies of diploid genomes are generally unphased, pseudo-haploid representations that do not correctly reconstruct the two parental haplotypes present in the individual sequenced. Instead, the assembly alternates between parental haplotypes and may contain duplications in regions where the parental haplotypes are sufficiently different. Trio binning is an approach to genome assembly that uses short reads from both parents to classify long reads from the offspring according to maternal or paternal haplotype origin, and is thus helped rather than impeded by heterozygosity. Using this approach, it is possible to derive two assemblies from an individual, accurately representing both parental contributions in their entirety with higher continuity and accuracy than is possible with other methods.Results We used trio binning to assemble reference genomes for two species from a single individual using an interspecies cross of yak (Bos grunniens) and cattle (Bos taurus). The high heterozygosity inherent to interspecies hybrids allowed us to confidently assign >99% of long reads from the F1 offspring to parental bins using unique k-mers from parental short reads. Both the maternal (yak) and paternal (cattle) assemblies contain over one third of the acrocentric chromosomes, including the two largest chromosomes, in single haplotigs.Conclusions These haplotigs are the first vertebrate chromosome arms to be assembled gap-free and fully phased, and the first time assemblies for two species have been created from a single individual. Both assemblies are the most continuous currently available for non-model vertebrates.MbmegabaseskbkilobasesMYAmillions of years agoMHCmajor histocompatibility complexSMRTsingle molecule real time

Read more
April 21, 2020

Evolution of a 72-kb cointegrant, conjugative multiresistance plasmid from early community-associated methicillin-resistant Staphylococcus aureus isolates.

Horizontal transfer of plasmids encoding antimicrobial-resistance and virulence determinants has been instrumental in Staphylococcus aureus evolution, including the emergence of community-associated methicillin-resistant S. aureus (CA-MRSA). In the early 1990s the first CA-MRSA isolated in Western Australia (WA), WA-5, encoded cadmium, tetracycline and penicillin-resistance genes on plasmid pWBG753 (~30 kb). WA-5 and pWBG753 appeared only briefly in WA, however, fusidic-acid-resistance plasmids related to pWBG753 were also present in the first European CA-MRSA at the time. Here we characterized a 72-kb conjugative plasmid pWBG731 present in multiresistant WA-5-like clones from the same period. pWBG731 was a cointegrant formed from pWBG753 and a pWBG749-family conjugative plasmid. pWBG731 carried mupirocin, trimethoprim, cadmium and penicillin-resistance genes. The stepwise evolution of pWBG731 likely occurred through the combined actions of IS257, IS257-dependent miniature inverted-repeat transposable elements (MITEs) and the BinL resolution system of the ß-lactamase transposon Tn552 An evolutionary intermediate ~42-kb non-conjugative plasmid pWBG715, possessed the same resistance genes as pWBG731 but retained an integrated copy of the small tetracycline-resistance plasmid pT181. IS257 likely facilitated replacement of pT181 with conjugation genes on pWBG731, thus enabling autonomous transfer. Like conjugative plasmid pWBG749, pWBG731 also mobilized non-conjugative plasmids carrying oriT mimics. It seems likely that pWBG731 represents the product of multiple recombination events between the WA-5 pWBG753 plasmid and other mobile genetic elements present in indigenous CA-MSSA. The molecular evolution of pWBG731 saliently illustrates how diverse mobile genetic elements can together facilitate rapid accrual and horizontal dissemination of multiresistance in S. aureus CA-MRSA.Copyright © 2019 American Society for Microbiology.

Read more
April 21, 2020

De novo assembly and annotation of the Ganoderma australe genome.

The Ganoderma genus represents clear biotechnological potential, due to the large quantity of molecules with biological activity that could be explored. However, available information regarding the biotechnological importance of species within Ganoderma, other than G. lucidum, is quite limited. Genomic studies of little-known species can contribute to the knowledge thereof, as well as the search for metabolic pathways and the identification of genes which code for proteins that may be of biotechnological relevance. Therefore, the objective of the present study was to obtain the G. australe genome, through the use of new sequencing technologies. Genomic DNA from G. australe was sequenced with the PacBio Sequel system, to a depth of 100×. The genome was assembled de novo with the Canu assembly tool, and gene prediction and annotation were performed with a funannotate pipeline. An assembled 84?Mb genome was obtained, and 22,756 putative protein-coding sequences were predicted in the G. australe genome. Ganoderic acid pathways were annotated and listed in the funannotate pipeline, and were recognized using Pfam and Antismash signals. Thus, the G. australe genome shows great potential, mainly, due to the annotation of putative sequences that could be employed in biotechnological approaches. Copyright © 2019 Elsevier Inc. All rights reserved.

Read more
April 21, 2020

An improved pig reference genome sequence to enable pig genetics and genomics research

The domestic pig (Sus scrofa) is important both as a food source and as a biomedical model with high anatomical and immunological similarity to humans. The draft reference genome (Sscrofa10.2) represented a purebred female pig from a commercial pork production breed (Duroc), and was established using older clone-based sequencing methods. The Sscrofa10.2 assembly was incomplete and unresolved redundancies, short range order and orientation errors and associated misassembled genes limited its utility. We present two highly contiguous chromosome-level genome assemblies created with more recent long read technologies and a whole genome shotgun strategy, one for the same Duroc female (Sscrofa11.1) and one for an outbred, composite breed male animal commonly used for commercial pork production (USMARCv1.0). Both assemblies are of substantially higher (>90-fold) continuity and accuracy compared to the earlier reference, and the availability of two independent assemblies provided an opportunity to identify large-scale variants and to error-check the accuracy of representation of the genome. We propose that the improved Duroc breed assembly (Sscrofa11.1) become the reference genome for genomic research in pigs.

Read more
April 21, 2020

Genome-Wide Association Study of Growth and Body-Shape-Related Traits in Large Yellow Croaker (Larimichthys crocea) Using ddRAD Sequencing.

Large yellow croaker (Larimichthys crocea) is an economically important marine fish species of China. Due to overfishing and marine pollution, the wild stocks of this croaker have collapsed in the past decades. Meanwhile, the cultured croaker is facing the difficulties of reduced genetic diversity and low growth rate. To explore the molecular markers related to the growth traits of croaker and providing the related SNPs for the marker-assisted selection, we used double-digest restriction-site associated DNA (ddRAD) sequencing to dissect the genetic bases of growth traits in a cultured population and identify the SNPs that associated with important growth traits by GWAS. A total of 220 individuals were genotyped by ddRAD sequencing. After quality control, 27,227 SNPs were identified in 220 samples and used for GWAS analysis. We identified 13 genome-wide significant associated SNPs of growth traits on 8 chromosomes, and the beta P of these SNPs ranged from 0.01 to 0.86. Through the definition of candidate regions and gene annotation, candidate genes related to growth were identified, including important regulators such as fgf18, fgf1, nr3c1, cyp8b1, fabp2, cyp2r1, ppara, and ccm2l. We also identified SNPs and candidate genes that significantly associated with body shape, including bmp7, col1a1, col11a2, and col18a1, which are also economically important traits for large yellow croaker aquaculture. The results provided insights into the genetic basis of growth and body shape in large yellow croaker population and would provide reliable genetic markers for molecular marker-assisted selection in the future. Meanwhile, the result established a basis for our subsequent fine mapping and related gene study.

Read more

Subscribe for blog updates:

Talk with an expert

If you have a question, need to check the status of an order, or are interested in purchasing an instrument, we're here to help.