SFAF 2014 Presentation Slides: James Gurtowski of Cold Spring Harbor Laboratory (CSHL) shared assembly results for a variety of eukaryotic genomes, including yeast, arabidopsis, and rice.
Single Molecule, Real-Time (SMRT) Sequencing holds promise for addressing new frontiers to understand molecular mechanisms in evolution and gain insight into adaptive strategies. With read lengths exceeding 10 kb, we are able to sequence high-quality, closed microbial genomes with associated plasmids, and investigate large genome complexities, such as long, highly repetitive, low-complexity regions and multiple tandem-duplication events. Improved genome quality, observed at 99.9999% (QV60) consensus accuracy, and significant reduction of gap regions in reference genomes (up to and beyond 50%) allow researchers to better understand coding sequences with high confidence, investigate potential regulatory mechanisms in noncoding regions, and make inferences about evolutionary strategies that are otherwise missed by the coverage biases associated with short- read sequencing technologies. Additional benefits afforded by SMRT Sequencing include the simultaneous capability to detect epigenomic modifications and obtain full-length cDNA transcripts that obsolete the need for assembly. With direct sequencing of DNA in real-time, this has resulted in the identification of numerous base modifications and motifs, which genome-wide profiles have linked to specific methyltransferase activities. Our new offering, the Iso-Seq Application, allows for the accurate differentiation between transcript isoforms that are difficult to resolve with short-read technologies. PacBio reads easily span transcripts such that both 5’/3’ primers for cDNA library generation and the poly-A tail are observed. As such, exon configuration and intron retention events can be analyzed without ambiguity. This technological advance is useful for characterizing transcript diversity and improving gene structure annotations in reference genomes. We review solutions available with SMRT Sequencing, from targeted sequencing efforts to obtaining reference genomes (>100 Mb). This includes strategies for identifying microsatellites and conducting phylogenetic comparisons with targeted gene families. We highlight how to best leverage our long reads that have exceeded 20 kb in length for research investigations, as well as currently available bioinformatics strategies for analysis. Benefits for these applications are further realized with consistent use of size selection of input sample using the BluePippin™ device from Sage Science as demonstrated in our genome improvement projects. Using the latest P5-C3 chemistry on model organisms, these efforts have yielded an observed contig N50 of ~6 Mb, with the longest contig exceeding 12.5 Mb and an average base quality of QV50.
PacBio 2014 User Group Meeting Presentation Slides: Alisha Holloway of the Gladstone Institutes presented on the use of isoform sequencing (Iso-Seq) to improve the annotation of the chicken genome as a model reference for cardiovascular research.
Single Molecule, Real-Time (SMRT) Sequencing provides efficient, streamlined solutions to address new frontiers in plant genomes and transcriptomes. Inherent challenges presented by highly repetitive, low-complexity regions and duplication events are directly addressed with multi- kilobase read lengths exceeding 8.5 kb on average, with many exceeding 20 kb. Differentiating between transcript isoforms that are difficult to resolve with short-read technologies is also now possible. We present solutions available for both reference genome and transcriptome research that best leverage long reads in several plant projects including algae, Arabidopsis, rice, and spinach using only the PacBio platform. Benefits for these applications are further realized with consistent use of size-selection of input sample using the BluePippin™ device from Sage Science. We will share highlights from our genome projects using the latest P5- C3 chemistry to generate high-quality reference genomes with the highest contiguity, contig N50 exceeding 1 Mb, and average base quality of QV50. Additionally, the value of long, intact reads to provide a no-assembly approach to investigate transcript isoforms using our Iso-Seq protocol will be presented for full transcriptome characterization and targeted surveys of genes with complex structures. PacBio provides the most comprehensive assembly with annotation when combining offerings for both genome and transcriptome research efforts. For more focused investigation, PacBio also offers researchers opportunities to easily investigate and survey genes with complex structures.
Heterozygous and highly polymorphic diploid (2n) and higher polyploidy (n > 2) genomes have proven to be very difficult to assemble. One key to the successful assembly and phasing of polymorphic genomics is the very long read length (9-40 kb) provided by the PacBio RS II system. We recently released software and methods that facilitate the assembly and phasing of genomes with ploidy levels equal to or greater than 2n. In an effort to collaborate and spur on algorithm development for assembly and phasing of heterozygous polymorphic genomes, we have recently released sequencing datasets that can be used to test and develop highly polymorphic diploid and polyploidy assembly and phasing algorithms. These data sets include multiple species and ecotypes of Arabidopsis that can be combined to create synthetic in-silico F1 hybrids with varying levels of heterozygosity. Because the sequence of each individual line was generated independently, the data set provides a ‘ground truth’ answer for the expected results allowing the evaluation of assembly algorithms. The sequencing data, assembly of inbred and in-silico heterozygous samples (n=>2) and phasing statistics will be presented. The raw and processed data has been made available to aid other groups in the development of phasing and assembly algorithms.
PacBio’s new Iso-Seq technology allows for rapid generation of full-length cDNA sequences without the need for assembly steps. The technology was tested on leaf mRNA from two model O. sativa ssp. indica cultivars – Minghui 63 and Zhenshan 97. Even though each transcriptome was not exhaustively sequenced, several thousand isoforms described genes over a wide size range, most of which are not present in any currently available FL cDNA collection. In addition, the lack of an assembly requirement provides direct and immediate access to complete mRNA sequences and rapid unraveling of biological novelties.
Generating de novo reference genome assemblies for non-model organisms is a laborious task that often requires a large amount of data from several sequencing platforms and cytogenetic surveys. By using PacBio sequence data and new library creation techniques, we present a de novo, high quality reference assembly for the goat (Capra hircus) that demonstrates a primarily sequencing-based approach to efficiently create new reference assemblies for Eukaryotic species. This goat reference genome was created using 38 million PacBio P5-C3 reads generated from a San Clemente goat using the Celera Assembler PBcR pipeline with PacBio read self-correction. In order to generate the assembly, corrected and filtered reads were pre-assembled into a consensus model using PBDAGCON, and subsequently assembled using the Celera Assembly version 8.2. We generated 5,902 contigs using this method with a contig N50 size of 2.56 megabases. In order to generate chromosome-sized scaffolds, we used the LACHESIS scaffolding method to identify cis-chromosome Hi-C interactions in order to link contigs together. We then compared our new assembly to the existing goat reference assembly to identify large-scale discrepancies. In our comparison, we identified 247 disagreements between the two assemblies consisting of 123 inversions and 124 chromosome-contig relocations. The high quality of this data illustrates how this methodology can be used to efficiently generate new reference genome assemblies without the use of expensive fluorescent cytometry or large quantities of data from multiple sequencing platforms.
The goat (Capra hircus) remains an important livestock species due to the species’ ability to forage and provide milk, meat and wool in arid environments. The current goat reference assembly and annotation borrows heavily from other loosely related livestock species, such as cattle, and may not reflect the unique structural and functional characteristics of the species. We present preliminary data from a new de novo reference assembly for goat that primarily utilizes 38 million PacBio P5-C3 reads generated from an inbred San Clemente goat. This assembly consists of only 5,902 contigs with a contig N50 size of 2.56 megabases which were grouped into scaffolds using cis-chromosome associations generated by the analysis of Hi-C sequence reads. To provide accurate functional genetic annotation, we utilized existing RNA-seq data and generated new data consisting of over 784 million reads from a combination of 27 different developmental timepoints/tissues. This dataset provides a tangible improvement over existing goat genomics resources by correcting over 247 misassemblies in the current goat reference genome and by annotating predicted gene models with actual expressed transcript data. Our goal is to provide a high quality resource to researchers to enable future genomic selection and functional prediction within the field of goat genomics.
Conyza canadensis (horseweed), a member of the Compositae (Asteraceae) family, was the first broadleaf weed to evolve resistance to glyphosate. Horseweed, one of the most problematic weeds in the world, is a true diploid (2n=2X=18) with the smallest genome of any known agricultural weed (335 Mb). Thus, it is an appropriate candidate to help us understand the genetic and genomic basis of weediness. We undertook a draft de novo genome assembly of horseweed by combining data from multiple sequencing platforms (454 GS-FLX, Illumina HiSeq 2000 and PacBio RS) using various libraries with different insertion sizes (~350 bp, ~600 bp, ~3 kb and ~10 kb) of a Tennessee-accessed, glyphosate-resistant horseweed biotype. From 116.3 Gb (~350× coverage) of data, the genome was assembled into 13,966 scaffolds with N50 =33,561 bp. The assembly covered 92.3% of the genome, including the complete chloroplast genome (~153 kb) and a nearly-complete mitochondrial genome (~450 kb in 120 scaffolds). The nuclear genome is comprised of 44,592 protein-coding genes. Genome re-sequencing of seven additional horseweed biotypes was performed. These sequence data were assembled and used to analyze genome variation. Simple sequence repeat and single nucleotide polymorphisms were surveyed. Genomic patterns were detected that associated with glyphosate-resistant or –susceptible biotypes. The draft genome will be useful to better understand weediness, the evolution of herbicide resistance, and to devise new management strategies. The genome will also be useful as another reference genome in the Compositae. To our knowledge, this paper represents the first published draft genome of an agricultural weed.
As the costs for genome sequencing have decreased the number of “genome” sequences have increased at a rapid pace. Unfortunately, the quality and completeness of these so–called “genome” sequences have suffered enormously. We prefer to call such genome assemblies as “gene assembly space” (GAS). We believe it is important to distinguish GAS assemblies from reference genome assemblies (RGAs) as all subsequent research that depends on accurate genome assemblies can be highly compromised if the only assembly available is a GAS assembly.
Lameness is a significant problem resulting in millions of dollars in lost revenue annually. In commercial broilers, the most common cause of lameness is bacterial chondronecrosis with osteomyelitis (BCO). We are using a wire flooring model to induce lameness attributable to BCO. We used 16S ribosomal DNA sequencing to determine that Staphylococcus spp. were the main species associated with BCO. Staphylococcus agnetis, which previously had not been isolated from poultry, was the principal species isolated from the majority of the bone lesion samples. Administering S. agnetis in the drinking water to broilers reared on wire flooring increased the incidence of BCO three-fold when compared with broilers drinking tap water (P = 0.001). We found that the minimum effective dose of Staphylococcus agnetis to induce BCO in broilers grown on wire flooring experiment is 105 cfu/ml. We used PacBio and Illumina sequencing to assemble a 2.4 Mbp contig representing the genome and a 34 kbp contig for the largest plasmid of S. agnetis. Annotation of this genome is underway through comparative genomics with other Staphylococcus genomes, and identification of virulence factors. Our goal is to elucidate genetic diversity, toxins, and pathogenicity determinants, for this poorly characterized species. Isolating pathogenic bacterial species, defining their likely route of transmission to broilers, and genomic analyses will contribute substantially to the development of measures for mitigating BCO losses in poultry.
Clavibacter michiganensis subsp. michiganensis (Cmm) is a gram positive actinomycete, causing bacterial canker of tomato (Solanum lycopersicum) a disease that can cause significant losses in tomato production. In this study, we determined the complete genome sequence of 13 California Cmm strains and one saprophytic Clavibacter strain using a combination of Ilumina and PacBio sequencing. The California Cmm strains have genome size (3.2 -3.3 mb) similar to the reference strain NCPPB382 (3.3 mb) with =98% sequence identity. Cmm strains from California share =92% genes (8-10% are noble genes) with the reference Cmm strain NCPPB382. Despite this similarity, we detected significant alternatives in California strains with respect to plasmid number, plasmid composition, and genomic island presence indicating acquisition of unique mechanisms controlling virulence. Plasmids pCM1 and pCM2, that were previously demonstrated to be required for NCPPB382 virulence, also differ in their presence and gene content across Cmm strains. pCM2 is absent in some Cmm strains and that still retain virulence in tomato. Saprophytic Clavibacter possess a novel plasmid, pSCM, and lacks the majority of characterized virulence factors. Genome sequence information was also used to design specific and sensitive primer pairs for Cmm detection. A mechanistic understanding of how genomic changes have impacted Cmm virulence and survival across diverse strains will be necessary for developing a robust disease control strategies for bacterial canker of tomato.
Goat is an important source of milk, meat, and fiber, especially in developing countries. An advantage of goats as livestock is the low maintenance requirements and high adaptability compared to other milk producers. The global population of domestic goats exceeds 800 million. In Africa, goat production is characterized by low productivity levels, and attempts to introduce more productive breeds have met with poor success due in part to nutritional constraints. It has been suggested that incorporation of selective breeding within the herds adapted for survival could represent one approach to improving food security across Africa. A recently produced genome assembly of a Chinese Yunnan breed goat, based on 192 Gb of short reads across a range of insert sizes from 180 bp to 20 kb, reported a contig N50 of 18.7 kb. The scaffold N50 was improved from 2.2 Mb to 3.1 Mb by addition of fosmid end sequence, with an estimated 140 million Ns in gaps and 91% coverage. The assembly has proven somewhat problematic for pursuing genome-wide association analysis with SNP arrays, apparently due in part to errors in ordering of markers using the draft genome. In order to provide a higher quality assembly, we sequenced a highly inbred, San Clemente breed goat genome using 458 SMRT cells on the Pacific Biosciences platform. These cells generated 193.5 Gbases of sequence after processing into subreads, with mean 5110 bases and max subread length of 40.5 kb. This sequence data generated an assembly using the recently reported MHAP error correction approach and Celera Assembler v8.2. The contig N50 was 2.5 Mb, with the largest contig spanning 19.5 Mb. Additional characteristics of the assembly will be presented.
Drought is responsible for much of the global losses in crop yields and understanding how plants naturally cope with drought stress is essential for breeding and engineering crops for the changing climate. Resurrection plants desiccate to complete dryness during times of drought, then “come back to life” once water is available making them an excellent model for studying drought tolerance. Understanding the molecular networks governing how resurrection plants handle desiccation will provide targets for crop engineering. Oropetium thomaeum (Oro) is a resurrection plant that also has the smallest known grass genome at 250 Mb compared to Brachypodium distachyon (300 Mb) and rice (350 Mb). Plant genomes, especially grasses, have complex repeat structures such as telomeres, centromeres, and ribosomal gene cassettes, and high heterozygosity, which makes them difficult to assembly using short read next generation sequencing technologies. Ultra-long PacBio reads using the new P6C4 chemistry and the latest 15kb Blue Pippin size-selection protocol to generate 20kb insert libraries that yielded an average read length of 12kb providing ~72X coverage, and 10X coverage with reads over 20kb. The HGAP assembly covers 98% of the genome with a contig N50 of 2.4 Mb, which makes it one of the highest quality and most complete plant genomes assembled to date. Oro has a compact genome structure compared to other grasses with only 16% repeat sequences but has very good collinearity with other grasses. Understanding the genomic mechanisms of extreme desiccation tolerance in resurrection plants like Oro will provide insights for engineering and intelligent breeding of improved food, fuel, and fiber crops.
The throughput of SMRT Sequencing and long reads allows microbial communities to be analyzed using a shotgun sequencing approach. Key to leveraging this data is the ability to cluster sequences belonging to the same member of a community. Long reads of up to 40 kb provide a unique capability in identifying those relationships, and pave the way towards finished assemblies of community members. Long reads are highly valuable when samples are more complex and containing lower intra-species variation, such as a larger number of closely related species, or high intra-species variation. Here, we present a collection of tools tailored for the analysis of PacBio metagenomic assemblies. These tools allow for improvements in the assembly results, and greater insight into the complexity of the study communities. Supervised classification is applied to a large set of sequence characteristics (e.g. GC content, raw read coverage, k-mer frequency, and gene prediction information) and to cluster contigs from single or highly related species. Assembly in isolation of the raw data associated with these contigs is shown to improve assembly statistics. A unique feature of SMRT Sequencing is the availability to leverage simultaneously collected base modification / methylation data to aid the clustering of contigs expected to comprise a single or very closely related species. We demonstrate the added value of base modification information to distinguish and study variation within metagenomic samples based on differences in the methylated DNA motifs involved in the restriction modification system. Application of these techniques is demonstrated on a mock community and monkey intestinal microbiome sample.
If you have a question, need to check the status of an order, or are interested in purchasing an instrument, we're here to help.